albert e Posted July 19, 2012 Share Posted July 19, 2012 Thanks for the reply, can you elaborate on 'try another configuration'? I have tried doing away with nullcpumanagement and voodoopstate, changing ps2 kexts, all to no avail - are these 'trying another configuration'? From what I have observed, the unable to shutdown / restart problem seems to be kernel cache or cache in general related. In other words, if some actions are done prior to system shutting down or restarting that makes the system needing to rebuild cache, the system WILL shutdown or restart properly. I meant to say run "./edptool.command" to load another configuration. But it seems that you just need to run myFix/Quick to reconfigure cache if that is what you are suspecting. I had the same failure with restart/shutdown, so I reconfigure(try another configurations to optimized your system (D630, D830 whatever system you have). in this forum, there is no proposed configuration for D630/D630/etc. system. We're still trying to figure it out. Sharing is important in the forum and if members don't share the best optimized system for D630/D630/etc. then those that are struggling will keep on 'hacking". There's no end. So, I hope members SHARE!. I am in the middle of testing I believe the best configuration for D630 but holding on till I have done extensive tests before I share them. I've found a kext for SleepEnabler.kext that works on my D630 so far, I will share later on. On my configuration/tests, graphics acceleration was not acceptable on this OS X ML GM; I will submit Xbench tests later. At the moment. keep the patience and keep on 'hacking" and then share. Link to comment Share on other sites More sharing options...
potatohead Posted July 19, 2012 Share Posted July 19, 2012 I meant to say run "./edptool.command" to load another configuration. But it seems that you just need to run myFix/Quick to reconfigure cache if that is what you are suspecting. I had the same failure with restart/shutdown, so I reconfigure(try another configurations to optimized your system (D630, D830 whatever system you have). in this forum, there is no proposed configuration for D630/D630/etc. system. We're still trying to figure it out. Sharing is important in the forum and if members don't share the best optimized system for D630/D630/etc. then those that are struggling will keep on 'hacking". There's no end. So, I hope members SHARE!. I am in the middle of testing I believe the best configuration for D630 but holding on till I have done extensive tests before I share them. I've found a kext for SleepEnabler.kext that works on my D630 so far, I will share later on. On my configuration/tests, graphics acceleration was not acceptable on this OS X ML GM; I will submit Xbench tests later. At the moment. keep the patience and keep on 'hacking" and then share. got it, thanks. weird thing is rebuilding cache does NOT ALWAYS work (90% of the times it works; still yet to find a trend), so running myFix (quick or full) is not a foolproof solution. so far I can confirm default config for d630 and d830 nvidia (without sleep) does not work properly on d630 nvidia. will continue to try and report back Link to comment Share on other sites More sharing options...
albert e Posted July 20, 2012 Share Posted July 20, 2012 got it, thanks. weird thing is rebuilding cache does NOT ALWAYS work (90% of the times it works; still yet to find a trend), so running myFix (quick or full) is not a foolproof solution. so far I can confirm default config for d630 and d830 nvidia (without sleep) does not work properly on d630 nvidia. will continue to try and report back This kext (attached) works for me (D630-nvidia). Sleep/wake works! Use KextWizard to import it to E/E folder. Run myFix/Quick, reboot, voila "peanut-butter" sandwich.! SleepEnabler.kext.zip Link to comment Share on other sites More sharing options...
potatohead Posted July 20, 2012 Share Posted July 20, 2012 This kext (attached) works for me (D630-nvidia). Sleep/wake works! Use KextWizard to import it to E/E folder. Run myFix/Quick, reboot, voila "peanut-butter" sandwich.! didnt work for me, pity. using EDP 411 D630 nvidia and D830 nvidia config, both restart / shutdown and sleep didnt work with the kext u attached. what is the config u used (together with the sleep kext attached) to get everything working? thkq Link to comment Share on other sites More sharing options...
xargon Posted July 20, 2012 Share Posted July 20, 2012 Tried to Install a D630 with NVIDIA and 10.8 gm but the machine hangs at: ACPI: System State [s0 S3 S4 S5] Using different parameters like -f -v -x mach_kernel or arch=x86_64 ... Any idea? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 20, 2012 Administrators Share Posted July 20, 2012 you need to remove arch=i386 out of the Boot.plist and might need to boot with npci=0x2000 Link to comment Share on other sites More sharing options...
xargon Posted July 20, 2012 Share Posted July 20, 2012 Hm. Forgot to say that this happens After Install and when i try to boot for the first time. Npci doesn't work? Link to comment Share on other sites More sharing options...
peterW Posted July 20, 2012 Share Posted July 20, 2012 albert e, sleepenabler works for me,kextwizzard didn't kexthelper b7 does the trick!! full working 10.8 GM now!! thnx Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 20, 2012 Administrators Share Posted July 20, 2012 maybe try myfix instead of kextwizzard or kexthelper b7 Link to comment Share on other sites More sharing options...
peterW Posted July 20, 2012 Share Posted July 20, 2012 maybe try myfix instead of kextwizzard or kexthelper b7 i will try next install 10.8 Link to comment Share on other sites More sharing options...
Recommended Posts