mrbryan Posted June 22, 2013 Share Posted June 22, 2013 I tried following this guide with new App store 10.8.4. I tseems to get to very nearly boot (from the myHack install drive) then freezes with last warning being "AGPM Controller unkownPlatform" Then loads intel8256MM then "enable success" Then freezes there. I have tried different Nvidia kexts posted on here.. doesn't get me past that stage. I used the e6400 boot back with the changed line in the bootloader config file as suggested Link to comment Share on other sites More sharing options...
Darvinko Posted June 23, 2013 Author Share Posted June 23, 2013 Using the machine you created the installer with, go into S/L/E on the installer, move the AppleACPIPlatform.kext to trash, run a MyFix (full) on the installer after that and see if that works. Link to comment Share on other sites More sharing options...
mrbryan Posted July 10, 2013 Share Posted July 10, 2013 Just a note that my wifi card (broadcom 1397) could not connect to non-WEP encrypted networks (WPA, WPA2 etc) after 10.8.4, but restoring airportd from 10.8.3 as suggested in another thread appears to have worked re-attached that file here replace the /user/libexec/airportd with this one, fix permissions to 755 & root:wheel ownership. I also removed the apple quarrantine flag: xattr -d com.apple.quarantine /user/libexec/airportd 1 Link to comment Share on other sites More sharing options...
sad nomad Posted July 25, 2013 Share Posted July 25, 2013 hi all, i updated working e6400 from 10.8.2 to 10.8.4 and lost my wifi. hardware is not detected any more. I tried different kexts but no luck... did anyone experience the same problem? any advice? thanks! Link to comment Share on other sites More sharing options...
Darvinko Posted July 25, 2013 Author Share Posted July 25, 2013 The migration to new Wi-Fi formats has broken some Wi-Fi cards, remind me of which card you have. Read post #397 above and try that to see if it works for you. Link to comment Share on other sites More sharing options...
sad nomad Posted July 28, 2013 Share Posted July 28, 2013 thanks Darvinko! my card is Dell Wireless 1397 and it worked perfectly with 10.8.2. post #397 doesn't work for me - new system does not detect the wifi hardware at all. The migration to new Wi-Fi formats has broken some Wi-Fi cards, remind me of which card you have. Read post #397 above and try that to see if it works for you. Link to comment Share on other sites More sharing options...
Darvinko Posted July 28, 2013 Author Share Posted July 28, 2013 Unfortunately there were some casualties in the changes Apple has incorporated into their new WiFi utilities and If memory serves me correctly the DW1397 was one of them. I'm not sure anyone has resolved this yet. A new card may be in order. Cards that work OOB will have the most longevity. My vote is for the DW1510, which can also be found listed as PW934. Link to comment Share on other sites More sharing options...
KOLIBERk Posted August 4, 2013 Share Posted August 4, 2013 Just a note that my wifi card (broadcom 1397) could not connect to non-WEP encrypted networks (WPA, WPA2 etc) after 10.8.4, but restoring airportd from 10.8.3 as suggested in another thread appears to have worked, re-attached that file here replace the /user/libexec/airportd with this one, fix permissions to 755 & root:wheel ownership. I also removed the apple quarrantine flag: xattr -d com.apple.quarantine /user/libexec/airportd Confirm, works with my E6400 + WLAN 1397 802.11 a/b/g, i was able to update from 10.8.2 to 10.8.4 [apple update] My S/L/E and E/E you can find there working/patched airportd from 10.8.2 Thank you mrbryan! Link to comment Share on other sites More sharing options...
Darvinko Posted August 4, 2013 Author Share Posted August 4, 2013 Confirm, works with my E6400 + WLAN 1397 802.11 a/b/g/N, i was able to update from 10.8.2 to 10.8.4 [apple update] My S/L/E and E/E you can find there working/patched airportd from 10.8.2 Thank you mrbryan! Thanks to both mrbryan for the workaround and KOLIBERk for the confirmation and making the patched airportd accessible for those unfamiliar with how to do so. I have a DW1510 (rebranded) and was unable to confirm this workaround, but another member indicated it did not work for them. Link to comment Share on other sites More sharing options...
jmenaya Posted September 7, 2013 Share Posted September 7, 2013 Works with my Vostro 1520 + WLAN 1397 802.11, i was able to update from 10.8.2 to 10.8.4 [combo update] Thank you mrbryan! Link to comment Share on other sites More sharing options...
Recommended Posts