Moderators Jake Lo Posted May 2, 2013 Moderators Share Posted May 2, 2013 Try this kext, it's included in the bootpack from edp. I don't have Bluetooth, so I can't test it for you. HDMI and USB3 should be working already. IOBluetoothFamily.kext.zip Link to comment Share on other sites More sharing options...
girardpallet Posted May 2, 2013 Share Posted May 2, 2013 Hello Jake-Lo thank for the bluetooth kext, it is working fine ! the next step is to try the hdmi, when the system will be fully ok, for information, i have use the extra that you post here: https://osxlatitude.com/index.php?/topic/2504-installing-ml-on-dell-e6530/ the DSDT from EDP database didn't work for me , because i thing my processor is i7-3520M and not QM ??? now my system is working but i don't know if it is fully configured correctly ? SDcard didn't work , and i don't have any usb3 to test ! is the sound working also in hdmi? thank again for your support Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 2, 2013 Moderators Share Posted May 2, 2013 Hmm, EDP shows this specs: Dell Latitude E6530 (i7 3520M & NVS 5200M) My DSDT and SSDT are for i7 -3720QM & nvs5200m HDMI sound does work, I've tested that. For SDcard, you might have to modify the deviceID. Use system info.app to find what it is and put it in info.plist You'll need to install Java for this app to work System Info.app.zip Link to comment Share on other sites More sharing options...
girardpallet Posted May 2, 2013 Share Posted May 2, 2013 i do it now and will keep you informed Link to comment Share on other sites More sharing options...
girardpallet Posted May 2, 2013 Share Posted May 2, 2013 here is the result of system info, but i don't know how to add to info.plist of VoodooSDHC thanks for your help, i learn a lot Sans titre1.tiff Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 2, 2013 Moderators Share Posted May 2, 2013 Try this one, I added the deviceID for this device. 1217/8221 VoodooSDHC.kext.zip Link to comment Share on other sites More sharing options...
girardpallet Posted May 2, 2013 Share Posted May 2, 2013 super , it is working fine , thank a lot ! edit: the SD card is not anymore recognized if i click "Eject" and remove the card from the reader , and reinsert ? re edit: after some minutes, the card reader is coming back !!! ??? now my next trouble is Shut down ! it is working but many time it is very very long, and some time very fast ! any ideas ? thank again Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 5, 2013 Moderators Share Posted May 5, 2013 Check to see if there's any problem program that's not close properly by running Option-Command-Esc and end them. Link to comment Share on other sites More sharing options...
girardpallet Posted May 11, 2013 Share Posted May 11, 2013 hello, i close everything before shutting down, but it is same ! sometime 3 seconds (ssd ) many time 1 minute ! Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted May 11, 2013 Administrators Share Posted May 11, 2013 use console app and see if cache generation is timing out. if so then you need to see what kext is causing it. many times it is caused if you have AppleACPIPlatform.kext in E/E and also still have the original one in S/L/E. you would need to backup the original to somewhere for safe keeping incase you need it ever and the remove it from S/L/E. after that run a myfix. the version of AppleACPIPlatform.kext that does not break cache generation in E/E needs to be Version 1.3.5 Link to comment Share on other sites More sharing options...
Recommended Posts