Jump to content

Bluetooth Firmware Uploader


EMlyDinEsH

Recommended Posts

  • Administrators

I think it depends on what the computer's manufacturer offers by default.

 

I have a BCM94360CD combo Wifi/BT card in my E6220+E6230, both fitted with their own built-in/internal DWxxx bluetooth module. I have to disable Bluetooth option in BIOS to deactivate the built-in/internal DWxxx devices and be able to run Bluetooth off the BCM94360CD cards. Otherwise, the built-in/internal device takes precedence.

 

I have verified that the BIOS option only applies to the built-in/internal device after removing the built-in DWxxx modules: the BT module of the Apple combo card still worked Ok with the BT BIOS option disabled. Of course, what's achieved on a given Dell model may not be applicable/repeatable on another Dell model or even on another brand...

 

There certainly is no visible BT module off my combo cards if they're installed in a PCIe-only slot rather than in a combo PCIe/USB one.

Link to comment
Share on other sites

Hello, first congratulations for your work, you are amazing.

 

But, a i´m need your help, i´m have:

 

Wifi: AR9565

BT: AR3012

 

So, i´m installed your kexts with Kext Wizard and restarted my hackintosh, but not working, not find another devices with bluetooth. How i´m fix or great... how i´m install it?

 

PS: My wireless card is OK!

Link to comment
Share on other sites

Hi, 

 

Thanks so much for this kext, EmlyDinesh,

 

Works fine loaded from Clover/Kexts/Other in 10.12.4 with my AR3011. The FN + F2 works great on my Asus U46E Laptop.

 

However, the bluetooth doesn't enable when returning from sleep. I tried with and without the 30 seconds patch.

 

Any ideas?? Do I need to move the kext to /L/E/???

Cheers!

Link to comment
Share on other sites

Greetings everyone!

I have a BCM94352HMB combo card. Got my Wi-Fi working perfectly, but BT works only AFTER waking up from sleep.

I also tried taping the 51 pin — BT wouldn't turn on even after sleep.

ioregs before and after sleep, log file are attached. 

Thanks in advance for help!

Archive 2.zip

Link to comment
Share on other sites

Hi. thanks for the ketx, but in my case fail load on Sierra

 

Bluetooth Firmware Uploader v3.1.5 Copyright (c) EMlyDinEsH <www.osxlatitude.com> 2012-2016.
BTFirmwareUploader :: ProductID 0x3000, VendorID 0xcf3
BTFirmwareUploader :: Atheros AR3011 Bluetooth detected
BTFirmwareUploader :: Using Linux fimrware
002454.627308 AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 100 sleepUnits 0
BTFirmwareUploader :: Failed to find control pipe 0, will try to use Bulk out pipe
BTFirmwareUploader :: HCI command request failed with error (0xe00002d6).
BTFirmwareUploader :: Failed to get the device state.

the wreid is, in linux (Archlinux 64bits) is detected as 0xcf3:3005 in lsusb

 

 

Bus 009 Device 002: ID 0cf3:3005 Qualcomm Atheros Communications AR3011 Bluetooth

in linux works ok

 

Is a Asus BT-211 USB dongle

https://www.asus.com/Networking/USBBT211_Mini_Bluetooth_Dongle/greetings

 

edit: forgot mention, same issue if use windows firmware

Gretings

 

Hi. Any help with this?

 

greetings

Link to comment
Share on other sites

Greetings everyone!

I have a BCM94352HMB combo card. Got my Wi-Fi working perfectly, but BT works only AFTER waking up from sleep.

I also tried taping the 51 pin — BT wouldn't turn on even after sleep.

ioregs before and after sleep, log file are attached. 

Thanks in advance for help!

 

Need some help here too :(

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...