Administrators Hervé Posted August 29, 2015 Administrators Share Posted August 29, 2015 I was using v1.3 from the SourceForge repo but I've now updated to v1.3(252) and I can compile the DSDT Ok. Link to comment Share on other sites More sharing options...
lemming Posted August 29, 2015 Author Share Posted August 29, 2015 Thanks. SD card is working now. Thanks. Brightness was still not working. I fixed it be removing the SSDT-1.aml from patched, just leaving the SSDT-12.aml and DSDT.aml. I guess there was something in there (HDMI audio patch?), that prevented it from working. I see F6 can turn the brightness down. Is there a hotkey for turning it up? Also, I tried moving the 2 audio files from clover/kexts/other to S/L/E but the headphones still don't work. Once again; really appreciate all the help I'm getting. A great community. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 30, 2015 Moderators Share Posted August 30, 2015 Follow guide to get your codec dump. Could be that yours is a little different than mine even though it's the same name. Use cat /proc/asound/card1/codec#0 > ~/Desktop/codec_dump.txt Brightness control is ScrlLock = dimming - In our keyboard, that would be Fn+F6 Pause = increase brightness - unfortunately our keyboard does not have this key You could probably switch the key with DSDT patching, but I don't have the expertise to do that. Workaround, use Brightness Slider app. With this app, I could have HDMI audio enable too. Link to comment Share on other sites More sharing options...
lemming Posted August 30, 2015 Author Share Posted August 30, 2015 Off to create a Linux USB to get audio codec dump... Intel Wireless/Bluetooth combo will not be supported and needs to be replaced. I recommend DW1560. $20 from Dell. Wish they were that easy to get a hold of here in Australia... Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 30, 2015 Moderators Share Posted August 30, 2015 Yes, pricey outside of US https://www.pinnaclemicro.com/checkout/checkout.php Link to comment Share on other sites More sharing options...
lemming Posted August 30, 2015 Author Share Posted August 30, 2015 Shipping is $118 US dollars Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 30, 2015 Moderators Share Posted August 30, 2015 I guess you could try the USB wireless instead. So is sleep/wake working on your setup? Link to comment Share on other sites More sharing options...
lemming Posted August 31, 2015 Author Share Posted August 31, 2015 Hi Sleep/wake seems to work fine. I've got an Edimax EW-7811UN USB WiFi that I have for my LEGO EV3 that I think works with OSX. Will give it a go tomorrow. A few small graphical issues on occasion, but it's been working well overall. Really keen on getting the headphone issue sorted out. I'm working on getting that sound codec dump. Perhaps tomorrow. Link to comment Share on other sites More sharing options...
lemming Posted September 1, 2015 Author Share Posted September 1, 2015 Hi I've attached the codec dumps for the ALC3235 and also HDMI. Hopefully you'll be able to help figure out how to get the headphones working. While I was in linux, I plugged a set of headphones with mic into the port and it auto-detected the new input/outputs and worked fine... codec ALC3235_dump.txt codecHDMI_dump.txt Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 3, 2015 Moderators Share Posted September 3, 2015 @lemming Question: Does the headset gets detected and autoswitch when it's inserted? If you have a dock, can you test if headset works from the dock jack? Link to comment Share on other sites More sharing options...
Recommended Posts