Erfan Posted February 25, 2012 Share Posted February 25, 2012 HI how to make high Brightness for dell latitude e6220 and 2 finger driver for mac os x lion thanks Link to comment Share on other sites More sharing options...
Administrators Leon Posted February 25, 2012 Author Administrators Share Posted February 25, 2012 brightness can fixed by adding a "hot corner" for display sleep.. then activate display sleep and press button again after display sleep have been activated... 2 finger.. dont know.. havent found any yet... feel free to look around... Link to comment Share on other sites More sharing options...
andersah Posted March 2, 2012 Share Posted March 2, 2012 Installed a new Dell DW1510 Mini PCI-.E card in the empty slot in my E6220 meant for WiMax. Connected the free antenna connector to J1 on the 1510. It just worked in Lion 10.7.2. Sysinfo below with some translation. Speed only half (ca 40 Mbps) as only one channel ( one antenna remember) and bad S/N ratio. But now I can keep the Intel Wifi for Windows 7 & 8 that works super with the Cisco APs at work. By the way Windows 8 Customer Preview runs fine on E6220 with few problems (had to make registry correction to get Cisco AnyConnect working) Only remaining obstacle with Lion on E6220 is audio but I understand there is a solution Anders Link to comment Share on other sites More sharing options...
Dorian Posted March 25, 2012 Share Posted March 25, 2012 To anyone that's installed Lion on their E6220... are you using UEFI mode or Legacy mode? I'm using UEFI mode with Windows right now so my partition table is GPT, not MBR. Are there any problems with installing this on GPT/UEFI? Link to comment Share on other sites More sharing options...
gbg Posted April 26, 2012 Share Posted April 26, 2012 Hello... i cant get any of my external monitor plugs to work. My System : E6220 / I7 / 8GB - Lion 10.7.3 running. HD3000 ist recognized. The System show NO extra connectors. When i type FN+F8 the external plugged Monitor is switched on - but the Screen is complete garbage... Everthing else ( beside WLAN ) is running ... can someone give me an advice how to fix this problem... regards. Link to comment Share on other sites More sharing options...
Guest Andrew Posted April 29, 2012 Share Posted April 29, 2012 Hey Leon, I've been trying to follow along with the steps you provided on the main OSXLatitude site, but get showstopping errors during the boot-from-USB process. Namely, I notice the following text output: "couldn't alloc class IntelCPUMonitor" ...and at the very end, after a few fakesmc debug errors, "still waiting for root device" I'm using the 10.7.3 install DMG, btw. Any advice? System specs attached. I am getting the same thing with 10.7.0. install dmg. Link to comment Share on other sites More sharing options...
Guest Andrew Posted April 29, 2012 Share Posted April 29, 2012 Hey Leon, I've been trying to follow along with the steps you provided on the main OSXLatitude site, but get showstopping errors during the boot-from-USB process. Namely, I notice the following text output: "couldn't alloc class IntelCPUMonitor" ...and at the very end, after a few fakesmc debug errors, "still waiting for root device" I'm using the 10.7.3 install DMG, btw. Any advice? System specs attached. I am getting the same thing with 10.7.0. install dmg. Link to comment Share on other sites More sharing options...
Guest Andrew Posted April 29, 2012 Share Posted April 29, 2012 How did you get past your boot error? Ok I got passed the boot 0 error Now I'm getting mac OS version not yet set Link to comment Share on other sites More sharing options...
Guest Andrew Posted May 3, 2012 Share Posted May 3, 2012 I used the ihack software to prepare the jumpdrive, then i used ihack to send the extra folder to the jump drive. then i booted to it and installed os x and ran EDP 2.2 I used the iHack method to prepare a boot key using the Extra folder from the e6220 bootpack .zip file. Marks walkthrough was good. Link to comment Share on other sites More sharing options...
theandrewgordon Posted May 4, 2012 Share Posted May 4, 2012 does this work for the touchpad? https://osxlatitude.com/index.php?/topic/895-64-bit-version-of-anv-slice-ps2-trackpad-keyboard/ Link to comment Share on other sites More sharing options...
Recommended Posts