Baio77

Example SSDT TB3 Dell 7390 CPU Kabylake -R

In ioreg RP05 you see the TB3, but it still doesn't work, you need an SSDT-TB3 for that TB3 model.

From ioreg I don't see the TB3, but it should be staying on RP05. In Bios you have active the options for TB3 ?? Test this EFI ioreg if start https://drive.google.com/drive/folders/1WFRVB2CHSM_xYcUXEeQoaUblyPcdjJ7o?usp=sharing

You probably need an ACPI + Kext patch or driver, it depends on the TB3 version you have .... Activating this device most likely interferes with sleep \ wake. Post ioreg your hack.

It would be useful to ioreg your Hackintosh and most likely the EFI as well. For the trackpad, find the configuration in System Preferences.

https://drive.google.com/drive/folders/14KJT1RZhlPrZQnvCSWk1_C-UYKAPRez-?usp=sharing In USB test this EFI , if start ioreg ...

In my EFI I have put in the Device section properties layout 11, if still audio does not go change 11 with 13 https://drive.google.com/drive/folders/1jZs3LILnLn8NdD-5yTRkTYpC1-OA5BGJ?usp=sharing

https://drive.google.com/drive/folders/1jZs3LILnLn8NdD-5yTRkTYpC1-OA5BGJ?usp=sharing In USB put this EFI (OC 0.7.9 + kext release) and try to boot, do a new ioreg with my EFI and check everything works. If the touchpad still doesn't work you need the clean DSDT to patch your HP's I2C. Here from Ioreg you can see the trackpad should only be activated

post ioreg please

Test this in USB , if start ioreg https://drive.google.com/drive/folders/1ps6b-yV80Ix8IPG5l2zuA8k71Du1LMpM?usp=sharing

https://drive.google.com/drive/folders/1EIkCb9mZrutU3akZ8n9T-O0s1hxnevyB?usp=sharing In USB test this EFI , if start ioreg. I fixed the kext and added some fundamentals SSTD. Trackpad preferences panel you can customize the settings. OC 0.7.9 + kext releases updated.

Test this EFI , if start ioreg https://drive.google.com/drive/folders/1mtHOfehlkVPjLSGTMltFPz4SbFZwH6yR?usp=sharing

Use SSDT-Dell integrates all necessary patches to your Dell. leaves only GPRW rename , delete the rest . Excerpt from the guide attached below: Add BrightnessKeys.kext and arrange the kext order, if you open the config with OCAuxilaryTools they are messy. example Advanced ACPI Guide https://github.com/5T33Z0/OC-Little-Translated

now it is OK

https://drive.google.com/drive/folders/1LEJcIJyxBHjCOwNm0IEjnbozl8SVgfIt?usp=sharing test this efi if start ioreg , I would need the DSDT your Dell.

It's all in the EFI ACPI folder I passed you over. If you open the ioreg of the 1st EFI you had and that of the last EFI you notice some variations. The most important at the moment is the activation of the Touchscreen and the addition of PWRB and SLPB devices as is present in real Macs. HP is a bit particular compared to other manufacturers. GPRW is usually present in laptops is essential. If you still have problems, I would try to disable the 2 kext SDReader and try. For a better analysis all the ACPI files extracted with EFI Debug would be needed. I would like to know if you have TB3 or USB Type C ports? Now I would like to know how the PC behaves. Everything I did I learned here. If you like this Hackintosh world you will not find more detailed guide. https://github.com/5T33Z0/OC-Little-Translated

Still try other EFI to test in USB if start new ioreg https://drive.google.com/drive/folders/1m439Spb9q-C4D817Prob7J8rmzJdSuot?usp=sharing

You need the ioreg of the last EFI I gave you. Ioreg varies if the EFI changes, I have to figure out if this changed in ACPI has any effect.

https://drive.google.com/drive/folders/1rHt4Md8xn3I5kIONioLUtWvkVriHufW1?usp=sharing test this EFI if start ioreg .....

Analyzing ioreg: your Dell does not have I2C trackpad so you have to try different version of VoodooPS2, or maybe directly the version of Rehabman.

https://drive.google.com/drive/folders/1WFRVB2CHSM_xYcUXEeQoaUblyPcdjJ7o?usp=sharing test this EFI if start ioreg . You should let them know if your Dell has integrated TB3 ports. In case patches need to be added.

Ioreg please .

In Dell usually SSDT-GPRW + Rename in config fix sleep. Some Dell have built-in TB3 ports and these are very annoying. It would take Ioreg to be able to determine the HW.

Hackintool, power, if you have red lines click on the screwdriver at the bottom center, if the lines turn green, restart and test. TB3 ports are very annoying in Hack with sleep

OK https://drive.google.com/drive/folders/1XZlTobBiI0kgbsAnD5wxdVVXurX_uHcX?usp=sharing Test this ioreg if start. EFI OC 0.7.7 + kext updated. I have deleted unnecessary kext. Check EVERYTHING works, if you notice that the startup is slower it is maybe because I added kext for TB3. If connected to cold they should already work.