Jake Lo

Post your Clover folder here for review

Could be graphics issue, try updating Lilu.kext & Nvidia Fixup kext https://github.com/vit9696/Lilu/releases https://github.com/vit9696/Lilu/blob/master/KnownPlugins.md Make sure you're running latest Clover as well.

FAQs from the Alps kexts thread!

@anka97 Most likely a DVMT issue. Post error as @Allan suggested by hitting the spacebar at the Clover GUI and select the options above

Check for core storage. See FAQ for more info Post screenshot for more specific error by booting with verbose & debug 0x100 mode

The answer is NO, it can't be done through DSDT patching. You could try replacing ApplePS2Controller with VoodooPS2Controller (ALPS), the version compiled by Bronxteck. Look at FAQ #5 to customize 4-5 finger gesture. I'm not sure if Alps v8 is supported though. Run the command to determine which version of Alps it has log show | grep ALPS

Boot to Clover, hit the spacebar. Select verbose and debug 0x100 mode Post the error here for review

HS most likely converted your files system to APFS, so you'll need t add APFS.efi to /EFI/Clover/drivers64UEFI You can get it from here

See Post Install here Try generate SSDT with PikerAlpha's SSDTPrGen.sh Google it

Here you go! EFI_E5470.zip

Yes you can upgrade directly to HS but you need to update a few things first: 1) upgrade to latest Clover 2) update kexts if there are newer version 3) update Config file using latest Clover Configurator Brightness control has change since 10.12.4. If you're upgrading from older OS X, you'll need to update the kext and patches as well. I think I had posted a High Sierra bootpack for this model somewhere, use the search option See here for more info regarding upgrading to HS

No, don't need FakePCIID_Intel_HDMI_Audio if it's working. For powermanagement, disable Hibernation and generate SSDT.aml. See post Installation here No idea how to get CPU Fan status. Try Googling

Try enabling Linux under GUI

@Hattori There is few more issues: - Multi-touch does not work with the trackpad, single touch and button do. Correct, limited support for now, you can experiment it yourself here regarding I2C controllers I don't have the hardware to test or experiment it myself - No sound. Try the new Config, moving layout -id from 56 to 13 - No HDMI output, if I hot plug HDMI cable, the computer will be freezed, i will have to press and hold power button to turn it off and turn on again. Try new Config, added HDMI patch for HD630 - SD card reader does not work. No support from now, but there's an early development here - How I can get HWMonitor software to display information about CPU temp, CPU fan speed, SSD temp and other information? Currently it's only showing internal battery information. Add the following kexts to /EFI/Clover/kexts/Other: FakeSMC_CPUSensors, FakeSMC_ACPISensors, FakeSMC_GPUSensors, & FakeSMC_LPCSensors config-HDMI.zip

did you enable Optimus in the BIOS?

quoted from link above ...Haswell family, we're talking about AppleIntelFramebufferAzul.kext (Azul FB)

Try replace Voodoops2Controller with this one It's generic mouse but 2 fingers scrolls works quite smooth.

Ok, patched files from your Origin folder. Replace folder into /EFI/Clover 5480_v1.9.3.zip

Already answered your question once before but for Sierra.

Here, try this, replace contents into /EFI/Clover 3510_BIOS_1.18.6.zip

Try this Config config.plist.zip

Make sure Legacy Option ROMS is disabled in the BIOS

Yes, open Config file with Clover Configurator, under GUI, remove Preboot under Hide Volume. Now you don't have to hit F3 overtime you boot. Run the attached permission.sh and post the output. I think cache is not working properly sudo permission.sh Check also in the BIOS under Wireless Devices if Bluetooth is enabled permission.sh.zip

check /EFI/Clover/drivers64UEFI, compare it with your other working system. Might just be needing drivers. Also try F3 to show any hidden partition

post IOReg http://forum.osxlatitude.com/index.php?app=core&module=attach&section=attach&attach_id=3591