Jake Lo

Select Save all Information and attach the file. The above images only tells me what graphics cards it has. I thought this is a Precision laptop, but it's actually a Desktop. I'll move this to the proper thread for desktop. With the exported file, we'll be able to get more detail of what other hardware it has...like sound card

Please post full system's spec If you have Windows, you can run dxdiag.exe and attach output here

Post IOReg file using IORegistryExplorer.app v2.1, not 3.0+

Have you tried reseting NVRam? I just updated to 11.5.1 with OC 0.7.1 as well without issue. Lilu = 1.5.5 AppleALC = 1.6.3

why did you remove SSDT-TYPEC? This is for the USB-C / TB port..might not be hot pluggable. The SSDT-TPDX is for the I2C touchpad. Sound like the USB-C is not hot pluggable. It only works on boot up.

Replace with this EFI, update to latest OC v0.7.1 Configured for Intel Wifi / BT If you have other, you'll need to make the adjustments. EFI.zip

Add this to ACPI folder and Config file Then post new IOReg file SSDT-TPDX.aml.zip

Probably not for the Alps I2C touchpad. SD Card should work. Use either Sinetek-rtsx.kext or RealtekCardReader.kext + RealtekCardReaderFriend.kext

BCKM includes PNLF in the patch so no need for the other. Do you get full range when adjusting the brightness? Have you tested to see if thunderbolt works?

Seems like USB issue. Do you have UEFI and AHCI enabled in the BIOS?

Which version of VoodooPS2? Can you post a new IOReg file with the WD15 connected? If you want a system with better touchpad support, you should look for one with a Precision touchpad or Synaptics (SMBus). The Precision 5510, maybe even newer comes with Precision touchpad and supported by VoodooI2C The Lenovo T14 and T490 has Synaptics touchpad which is fully supported by VoodooSMBus. I have a guide and bootpack for both of these systems. But for the 2 Lenovo's, unfortunately the wifi card are Intel and soldered to the system board. There are some support for the Intel but not very stable for me the last time I tested them. I guess you could go back one model T480 where it still can replace the wifi card.

Hmm, could be VoodooInput.kext that's making the difference because I switch it to the latest VoodooPS2's Input.kext in the Config file instead of what you had before which was Input.kext from VoodooI2C (older version). You could try putting back the latest VoodooPS2 but switch to VoodooI2C's Input.kext to confirm. The ethernet on the dock, do you know what model or brand is it? Maybe need to add a kext if existed? For thunderbolt, give this SSDT a try, just add it to the Config file. As you know, it'll only work on boot if it works at all, but not hot-plugging. Post a new IOReg file after adding this SSDT file SSDT-TYPEC.aml.zip

Try this, upgraded to OC 0.7.1 7310_OC_0.7.1.zip

You'll need to generate a new USBPort* kext perhaps. The one in the bootpack was from Hervé's Clover bootpack, not sure if the docking station USB ports added.

No. You should disable hibernation instead.

Post IOReg file using IORegistryExplorer.app v2.1, not 3.0+ try this config this disable VoodooPS2 and enable ApplePS2Controller config.plist.zip

Try this, replace Config and VoodooPS2 Touchpad.zip

Hervé uses an older variant version in his Clover guide. You could try switching with his version of the kexts...VoodooI2C and VoodooI2CHID.

Just added to my OC guide for E7440 https://osxlatitude.com/forums/topic/6472-dell-latitude-e7240e7440/?do=findComment&comment=104316

check out Hervé's guide, he also mentioned that trackpoint and mouse keys are not working. You can use tab to drag or 2 fingers to right click. There's really no good support to Alps I2C touchpad, only some basic movement. The USB-C port should work with external display though ... usb-c to DP port, but not much support there for thunderbolt.

??? Define full performance? How's it running now?

HDMI is enabled already in the Config file, try switch ig-platform-id to 00001659

For HDMI, plug in the monitor and launch IORegistryExplorer.app v2.1, not 3.0+ Save, compress and paste it here

Try this, add the SSDT and replace the Config file I think it's known for the mouse keys not to work for this model. No fix found so far. Thunderbolt is not supported with my file. You might need to add additional patches. fixFnKey.zip

According to Hervé's guide here, if it's not working OOB, then VGA is not supported. No patch that will make it work.