Jake Lo

add this under kernel/emulate Cpuid1Data: EC060800 00000000 00000000 00000000 Cpuid1Mask: FFFFFFFF 00000000 00000000 00000000

Try enabling RebuildAppleMemoryMap under Booter in Config file

Enable Legacy Option ROMs in the BIOS should fix it

Replace SSDT with this one Your audio is ALC292, not ALC295 Try installing ALC_Fix See here for guide under post installation SSDT-E5440.aml.zip

In my experience, those work by default whether you enable or not.

if the 'Line in Mcrophone' doesn't work, then you'll need to learn how to patch your AppleALC for ALC293. As far as I know, there's only patch made for Dell (layout-id =11 which is what you have). There's layout-id 28 and 29 for Lenovo and 30 for an Hasee ZX8 ( not familiar with this system). Give those a try if you like. There are a few guides out there on how to patch AppleHDA but I had never try. Not my cup of tea to be honest.

@tony2968 I had tried adding additional patching but none works, I guess it dependent of the battery status. Anyway, what changes are you expecting to find in the Trackpad preference? If you want to speed up or slow down, you could try using the settings from the mouse preference. FYI, even with the Trackpad preference active, there's not much you can adjust to make it any better as most of the options are for show only and does not work. Most you can do is scroll up and down, maybe left and right. Left tab and 2 finger tabs for right click. 3 fingers slide for show desktop. That's basically all you can do with the Alps touchpad kexts.

Replace your EFI with this one Make sure BIOS is set to UEFI AHCI Legacy Option ROMs enabled Secure boot disabled

First off, your Config file is corrupted. Seems to be an extra line @ 1470 2nd, you don't even have AirportBrcmFixup enabled in the Config file, you have both Itlwm and Airportitlwm enabled which are for Intel Wifi. Also if you do have the intel wifi, you should only use one or the other, not both. SystemProfilerMemoryFixup is obsolete, I'm disabling it and enable it via the Config file instead, new OC has it supported. Give these files a try. Made changes to the Config to add the Broadcom wifi, I'm assuming it's a DW1560. Add additional kexts to the kext folder overwriting the old if necessary. E5450_DW1560.zip

Make sure battery status is working, otherwise trackpad preference won't show. Reset NVRam is necessary.

What macOS do you have installed? See here for info

Replace your SSD drive, sounds like it's not supported

Ok we should patch your own DSDT instead of using one from another computer. Check your EFI/Clover/ACPI/Origin folder. Make sure it's empty. Boot to Clover, at the GUI, press F4. Continue booting to Sierra. Check the Origin folder, it should be populated now. Compress and attach the Origin folder here Also while you're on Sierra, download and run IORegistryExplorer.app v2.1, not 3.0 Run it, save it, compress it and attach it here as well

Ok, try this config Replacing VoodooPS2Controller-R6Bronxteck.kext with VoodooPS2Controller.kext instead config.plist.zip

Head over to Olarilla and download a full image to create an installer instead of using Recovery install

Give this a try. Replace the Config and add the 2 ssdt to ACPI folder Also enable SD Card reader Disabled VoodooPS2Controller, you already have VoodooPS2Controller-R6Bronxteck.kext Disabled RealtekRTL8111, system has Intel Ethernet ..IntelMausi already enabled E5450_audio.zip

post your EFI folder plus IOReg file using IORegistryExplorer.app v2.1

Yes, use alcid = 11 If still no audio, you'll probably need to add SSDT-HPET.aml and patch.

No, I didn't do that. Just ran the provided script for alc_fixup in the guide. Internal mic seems working. Fluctuates when I speak

What error are you encountering when you try to upgrade or install HS? Where did you get the patched DSDT?

Not sure why it shows IntelMausiEthernet, it should be IntelMausi.kext

I don't remember which OC version I was using with 11.2 but updating to OC 0.7.1 and latest kext should work fine. You might need to install ALCFix. See my guide here, last post

Have you tried Resetting NVRam? I have upgraded to 11.5.1, but still on OC 0.7.0 and no issue with audio.

Try without the MSI graphics card

Try this bootpack OC 0.7.1 EFI.zip