Jake Lo

Replace with this config. config.plist.zip

You need to patch for HDMI otherwise it'll freeze like you have. Please upload your Clover folder, I'll verify if you have it enabled or I could add it.

It looks like it's crashing with the wireless kext. What wireless card do you have in your system? If it's an Intel, try removing it and boot without cache again.

See here. Last post also mentioned alternative kext. Try that too if it didn't work. Best solution is to get a compatible internal device like DW1510 or DW1550

Try without cache. When you get to the Clover GUI, hit the spacebar. Select without cache from the drop down.

did you verify the following? 14. Launch the terminal and enter the following command diskutil list Note: If you see the following, then follow steps in Post #3 Under Core Storage before proceeding /dev/disk1 (internal, virtual):

There's no Latitude E4520, do you mean E5420?

Was the power button blinking when sleeping? what happen when you tap it to wake up? Does it sleep when you close the LID? what happened when you open the LID?

Thanks Hervé for the ALC256 patches and kexts. I'm including it into the bootpack. See if this works. Kexts in Other/LE are to be place in /Library/Extensions and then run the permission fix and rebuild cache. sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / Latitude_3470.zip

See my guide here with Skylake HD 520, specifically the Prerequisite section to change your DVMT. Are you sure about the audio being ALC3246 and not ALC3236?

Yes, your clover folder looks fine, booted fine on my E6220. So you need to verify if Clover is actually booting from that folder and not somewhere else.

Try this in the terminal sudo pmset hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo pmset hibernatefile /dev/null Also open system.log and search for Wake Reason.

Remove BrcmFirmwareData and install BrcmFirmwareRepo instead to /S/L/E

No issue, just tried both USB 2.0 and 3.0 devices. What version of BIOS are you on? If A13, use the new bootpack E7450_BIOS_A13.

what version of Clover did you have it installed?

Attach your Clover folder for Sierra. Could be you're missing something...

No issue with Sierra DP1 install. Make sure ram is in DIMM A. Use latest Clover that supports Sierra - I'm using v3696 Using bootpack from my El Capitan Clover guide using Legacy Clover install Replace VoodooPS2Controller with this Replace AppleHDAIDT.kext from the update section of the guide post #4 Add new hot patch for audio or replace 8319D411 with 8A19D411 find 8A19D411 replace 00000000

Aug 29 22:18:25 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint::identify: Found ALPS Device with ID E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a Aug 29 22:18:25 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint::identify: vanquybn your device here ID E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a Aug 29 22:18:25 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint EC Report: { 0x88, 0xba, 0x2a } Aug 29 22:18:25 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint::identify: ALPS vanquybn type 3 Aug 29 22:18:25 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint EC Report: { 0x88, 0xba, 0x2a } Aug 29 22:18:25 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint: Device initialization failed. Touchpad probably won't work Both versions, the touchpad and trackstick works, but have some issues. Trackstick scrolling doesn't work Touchpad scrolling is really fast, no inertia Click and Drag doesn't work for both trackstick and touchpad Click and expand won't work for both trackstick and touchpad

See here . You can modify it with your own 2-letters country code : Custom ?? BCM94352 5 GHz (>10.10.3) Name AirPortBrcm4360 Find 41 83 FC FF 74 2C 48 Replace 66 C7 06 ?? ?? EB 2B Codes mentioned in AirPortBrcm4360 ... but not tested yet ! (except FR DE US CA GB) AE AF AR AT AU AZ BD BE BG BN BR BT BY CA CH CL CN CO CR CY CZ DE DK DO EC EE EG ES FI FR GB GR GT GU HK HN HR HU ID IE IL IN IS IT JM JO JP KH KR KZ LA LI LK LT LU LV MA MM MN MO MT MV MX MY NI NL NO NP NZ PA PE PH PK PL PR PT PY RO RS RU SA SE SG SI SK SV TH TR TT TW UA US UY VE VI VN ZA Use this to replace the letters HEX values: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A

working with the new bootpack after permission fix and rebuild cache or with old bootpack? As a rule of thumb, you must repair permission and rebuild cache every time you replace kexts, update kexts, or remove kexts.

See new bootpack for BIOS version A13 Sleep won't work with E7450_Update, since it's build on version A10. Downgrading to A12 if fine too.

See new bootpack for BIOS version A13 Sleep won't work with E7450_Update, since it's build on version A10

I have A10 in my guide, but I just updated to A12 just to see if I encounter any of the issue you listed...mainly the early reboots, no audio and trackpad. So far no issue, sleep and wake works just fine with the same bootpack. Updated to A13 is a different story, sleep is no longer working. Tried recreating cache to see if it makes a difference, sleep works but won't wake with LID open, have to tap the power button. I'm going to export new DSDT/SSDT and repatch them. Will upload when I'm done testing them.

what is your system's specs? What version of bios is it running? Did you set BIOS to default and then change the settings according to the guide? There's no patch added to SSDT-7, but only fixes. It's required for SATA drives to be detected.

It detects it but touchpad / trackstick won't respond, keyboard works fine with version 20160825 Aug 26 18:46:49 localhost kernel[0]: ApplePS2ALPSGlidePoint::identify: Found ALPS Device with ID E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a Aug 26 18:46:49 localhost kernel[0]: ApplePS2ALPSGlidePoint::identify: Found ALPS Device with ID E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a Aug 26 19:08:24 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint::identify: Found ALPS Device with ID E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a Aug 26 19:08:24 Capis-MacBook-Pro kernel[0]: ApplePS2ALPSGlidePoint::identify: Found ALPS Device with ID E7=0x73 0x03 0x0a, EC=0x88 0xba 0x2a