Jake Lo

Remove the USB, plug it into a working system. Mount the EFI partition of the USB installer. Compress and attach the Origin folder.

The attachment is for an Acer system, not sure why you're attaching it. Drive is definitely a Sata drive not NMVe. Boot to Clover GUI, hit F4. Then compress and attach the /EFI/Clover/ACPI/Origin folder. It needs proper patching.

E5-573G is an Acer system, are we still working on the same system Lenovo G50? Definitely graphics is not loading, are you are sure you set the DVMT correctly? Drive not loading could be due to incomplete DSDT/SSDT patching. Are you sure you have NVMe drive and not SATA SSD?

That's correct.

Place kext in /EFI/Clover/Kexts/Other Rename Config to Config.plist Lenovo G50.zip

You'll need a patch for the NVMe drive. See here, must be done from 10.11.6 since you're installing 10.11.6.

Yes, place ethernet kext in /kexts/Other would work. Everything else should still work. You might want to redownload the ALC 283 again from the update section. Will work on El capitan and Sierra.

Use this IOGraphicsFamily patch for 10.12 find 01000075 25 replace with 010000EB 25

Same files from Yosemite should work with El Capitan too. Try adding RealtekRTL8111 or RealtekRTL8100 for ethernet.

Boot without cache and with verbose mode. Post the the KP. Which version of Clover did you install? How did you upgrade?

does your model have Intel or Broadcom ethernet? the bootpack only include the Intel Bluetooth...do you have Intel Wireless/bluetooth combo card? Is so, they are not compatible, need to be replaced. audio...reboot without cache, then run the permission fix and rebuild cache. reboot again...assuming you have copied the kexts to /Library/Extensions Sleep/wake, did you generate own SSDT with ssdtprgen.sh?

You patched 0x01660003 for HDMI audio but inject graphics with ig-platform-id with 0x0166000a. Is this intentional?

Does it have NVMe drive or Sata SSD? Do you have AHCI set in the BIOS?

Try here.

Known issue on Sierra, not the kexts issue.

Your Sierra Config file is corrupted. Issue is here in RED KextsToPatch Find QVBQTEUgU1NE Name IOAHCIBlockStorage Replace AAAAAAAAAAAA Comment HDMI-audio HD4000 0x01660003, port 0304 Find AwQAAAAEAACBAAAA Name AppleIntelFramebufferCapri Replace AwQAAAAIAAAGAAAA Comment HD4000 0x01660003 FrameBuffer 8 MB Name AppleIntelFramebufferCapri Find AwBmAQECBAIAAAAEAAAAAQ== Replace AwBmAQECBAIAAAAEAACAAA==

Known issue. You need to replace trackpad.prefpane with version from 10.11.6

Try my Clover guide, use bootpack E7x70 in post #2 but leave out all the SSDT/DSDT. In the Config.plist, disable Drop OEM SSDT.

Files are wrong, those are for Broadwell system with HD 5500. You have a Haswell system. Replace the files from here.

@obarreto, why not just follow the guide? Boot file is in post #2, update file in post#4. Guide includes instruction to generate SSDT for your specific CPU. DSDT included in boot files.

Replace VoodooPS2Controller with this one here.

Please list system specs and attach your Clover folder.

telanx, does internal and external mic work for you with this version Update: just tested your version, but no external mic detected.

Where is the picture?

See here