Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    871

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Try my config or remove the bluetooth patch from your config and see if that fixes it. Yes, maybe change your SMBios too.
  2. Jake Lo
    Problem is your config does not have the hot patches for the dummyHDA. I added the audio patches and bluetooth patch to your config. Your config also using ig-platform-id = 16160002, whereas mine uses 16260006. Your HDMI might not work, change it if it doesn't. Don't forget to generate SSDT for you CPU. See my E7450 guide for link. config.plist.zip
  3. Jake Lo
    Make sure to enable DropOEM in SSDT. If that still not working, then remove SSDT-1 and SSDT-2
  4. Jake Lo
    Try this v2.zip
  5. Jake Lo
    Try replacing the voodoops2controller with this one
  6. Jake Lo
    In Config, enable dropOEM under SSDT
  7. Jake Lo
    Try these elnino1981.zip
  8. Jake Lo
    See here how to adjust the key for brightness using Karabiner and replacing the private.xml file So which origin folder is correct? post #70, there's no SSDT-9, but post #73, there is SSDT-9 which shows that you have dedicated nvidia card.
  9. Jake Lo
    @elnino1981 Move your memory stick from slot B to slot A and try again. @mido_hima does the camera show in the USB section of the system info or in Camera? What ethernet card does your system have? perhaps different from the OP.
  10. Jake Lo
    Try booting without cache. When you get to the Clover GUI, hit the space bar and select it.
  11. Jake Lo
    Yes, as mentioned in the guide. Copy files to /EFI/Clover Instruction: 1. Download the Generic EFI folder. 2. Download model below and add the contents into the Generic /EFI/Clover <- folder
  12. Jake Lo
    Check system.log for 'Wake Reason' when booting with the HD4400 DSDT. You should not be using DSDT for HD5500. There's a big difference between the 2 hardwares.
  13. Jake Lo
    Yes, as noted 10.11.4 and up.
  14. Jake Lo
    That would be a no. See here.
  15. Jake Lo
    The patch you mentioned is only for the brief second before it gets to the login screen. It does not fix the graphics artifacts for the E6x30 model with HD 4000 with BIOS higher than A12.
  16. Jake Lo
    There's no graphics support for your Celeron CPU. See if you could upgrade it to an i5 or i7...
  17. Jake Lo
    See here. Fix is on post #9
  18. Jake Lo
    What's the system's spec?
  19. Jake Lo
    The last available download from App store be 10.11.5
  20. Jake Lo
    Get rid of VoodooHDA and AppleHDADisabler. Patched AppleHDA_IDT and vanilla AppleHDA is working fine.
  21. Jake Lo
    Replace it with DW1560, it's a combo wireless/bluetooth card.
  22. Jake Lo
    Have you tried booting without cache...when you see the Clover GUI, hit the spacebar and select it. Make sure to look at the Update section in post #4 for updated kexts and replace it in the bootpack before trying again.
  23. Jake Lo
    You install from a Dos boot disk or WinPE environment as well.
  24. Jake Lo
    DVD player says "HD Unsupported" You'll get that if your system doesn't have a physical DVD device. Same on a real Mac
  25. Jake Lo
    Your card is not supported, see below or click on the Unsupported link. Unsupported: Vendor Model Format Ven-Dev id Chip Rate SL L ML Mav Yos Cap OOB Kext (driver) Dell DW1705 1/2 Mini PCIe 168c-0036 AR9565 B/G/N N N N N N N N For Audio, after you copy the kexts to /L/E, did you run the permission fix and rebuild cache? What is the output after you ran the commands?
×
×
  • Create New...