Jake Lo
-
Posts
14365 -
Joined
-
Last visited
-
Days Won
868
Content Type
Profiles
Articles, News and Tips
Forums
Everything posted by Jake Lo
-
Try replacing your Extra folder with mine attached below. Make sure to backup yours first. Run myhack/full and reboot. HDMI and DVI output works. Didn't test HDMI audio, so not sure if it'll work or not. Cheers. Extra-E6220.zip
-
ktbos, From first look of your bios settings, you didn't include if you have CPU XD support enabled under security. If I disable it on my system, it'll just reboot in a loop, so try enabling if you haven't. Second, I see you have the resolution of 1600x900, did you included AppleIntelFramebufferCapri.zip to your boot pack? Looking at log2, it stops at loading the ethernet. Usually video loads right after, so my guess is your video is not loading which brings back to the question, have you include the patched AIFC. Try and report back your result. Cheers.
-
Try this DSDT. Rename the one in your Extra folder first. Reboot and try to see if the HDMI works. DSDT.aml.zip
-
LOL
-
myHack doesn't run fully in safemode. Go ahead and boot the usb installer with -x -v and select your ML installation. With the -v switch, you won't get the EBios timeout error. Once you're login, launch the terminal and run the following command: myfix -i / myfix -t / The first command will install Chameleon to your HDD The second will install E/E to S/L/E myHack.kext and repair permission. Reboot without your Usb installer. Can you list your cpu and what video you have? ie HD2500 or HD4000
-
The fix is to update your Chameleon with r2248 or above.
-
Changing smbios to 13,1, removed AICPM and install Nullcpu, still not sleeping on it's own. This time when I manually put it to sleep, I'll just get a blank screen, it will not resume until I hard reboot. All keyboard and mouse stopped working as well. All USB including ss USB which are USB 3.0 are functioning. I've installed GenericUSBXHCI, but I don't see super speed in the System Report. I read that HD2500 is just the lower end of HD4000 but the efi string should also works, have you try injecting it? I use 16205, but you could try 16603 if that doesn't work.
-
Bronxteck, Just upgraded bios to A14, same thing. I think I need to get a patch DSDT for sleep. Already tried sleepenabler, will get a KP. Not a big deal for me since it's a desktop, but display sleeps fine.
-
Follow this thread. I think voodoohda 2.8.4 works on it.
-
yeshu1984, As I recall, you can't disable the external display card, just disconnect it and remove it from the system. Yes, the bootpack will work on your i5 system as well. JL
-
Check out this thread, Sounds similar to your issue.
-
Leo, Try version 5.1, the drag does work with the touchpad, but not with the trackpoint.
-
OSX Mountain Lion Install on D830 Sound Not Working
Jake Lo replied to bean8378's topic in The Archive
hi bean8378, Go here, download EDP and run it. Select your model from the list and build it. -
Leo, I also get KP with version 7 on E6530. Just tried version 6.1 from previous page, no more KP. @bpedman, with this version 6.1, the cursor doesn't jump when the nub was release, it's weird that it would on v7. Now with v6.1, I can't drag with the trackpoint or with the trackpad, but preference show it load a mouse and trackpad. Also scrolling doesn't work on the trackpad. The Alps device ID is the same as the E5430 E7=0x73 0x03 0x0a. Thanks.
-
[Solved] Error on D630 ML install with EDP5: can't get <class docf> etc
Jake Lo replied to mr freckles's topic in The Archive
No reboot is necessary. Sounds like a failed installation of EDP. Try reinstalling. -
Which Intel HD kexts did you delete? And did you delete them before using the DP to DVI adapter? Make sure you have AppleIntelHD4000GraphicsGA.plugin,AppleIntelHD4000Graphics.kext,AppleIntelHD4000GraphicsGLDriver.bundle, and AppleIntelHD4000GraphicsVADriver.bundle in S/L/E. If you delete them, you won't get QE/CI.
-
Leo, If you use the bootpack from the guide, it should already include AppleSmartbatteryManager.kext. If it's not loading, try rerunning my hack, select my fix/full to rebuild cache and permission. If that still doesn't work, try adding -f switch to boot.plist.
-
[Solved] Error on D630 ML install with EDP5: can't get <class docf> etc
Jake Lo replied to mr freckles's topic in The Archive
Sounds like there might be some issue with EDP. Go to the Extra folder and run edptool.command. It'll then prompt you for a password, after entering the password, EDP will then launch. -
Try this dsdt and see if the number pad will work. For the trackpad/mouse, did you install the VoodooPS2synapticsPane.prefPane? You need to adjust some settings to get it to work.DSDT.aml.zip
-
Did you include the bootpack for your model? Check here.
-
Make sure you include Fake92HD87B1AppleHDA in E/E as well, remove voodoohda and applehdadisabler and run my fix to update permission and cache.
-
Ethenet on Inspiron N5010 laptop with RTL8103T card problem!!!
Jake Lo replied to pham.tam1208's topic in The Archive
Are you sure it kp or just hanging after displaying Ethernet? If the later, it means it's not able to load the display driver. If it has the Intel built-in display, it's probably the 1st generation gma display and getting QE/CI on it is hit and miss. So, please list your full specs here. Perhaps it might have different video. -
bpedman, Thanks, v7 works pretty good on my E6520, and thanks to Bjornw for uploading the version for Mavericks. On both version, I have an issue with dragging while using the trackstick. The left and right mouse click for the trackstick works but can't drag or increase/decrease windows size. Tried specific's advice to change 'Z' value but it doesn't work. Pointer still jumps to the right when you lift your finger from the trackstick. Can you get the trackstick scrolling to work too? That's the middle button. Right now it doesn't do anything. thanks again for the great work.
-
E6430 - Mavericks 10.9 DP1 - Successfully installed!
Jake Lo replied to James Vreeken's topic in The Archive
rob, Found that the connectors in AppleIntelFramebufferCapri needs to be modded if the resolution is 1600x900 or higher. Included is the boot pack that should work for your model if you're still interesting in testing Mavericks. Included AppleIntelFramebufferCapri is from DP4,but won't cause any issue with DP1 installer. For those with 1366x768, just remove AppleIntelFramebufferCapri from the boot pack. Extra_Mavericks.zip -
When you bootup with the installer, the second you see Chameleon loading, you can interrupt it by hitting the enter key. From there, simply enter -v and nothing else, and then hit the enter key to continue.
