EXEPOWERED Posted June 10, 2018 Share Posted June 10, 2018 Selected FixHeaders in config.plist (saved it ofc) and updated Clover. Now my Hackintosh won't boot, right after Apple Logo, system is restarting. ofc. I can easly rollback, I have handy usb-drive with working EFI partition to boot my system in case of any update error. But how to get new Clover working? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 10, 2018 Moderators Share Posted June 10, 2018 Boot to Clover/Options/ACPI Patching/DSDT fix mask See if Fix Headers is indeed enable Select it if it's not Go back to main screen hit space bar and select verbose & debug 0x100 post error Link to comment Share on other sites More sharing options...
EXEPOWERED Posted June 11, 2018 Share Posted June 11, 2018 There is no error really I think. Laptop turns off for a two seconds and boots up to clover again after this: (Sry for photo quality, I can't make an screenshoot of this propably and I have no good camera to get it nicely) root Device uuid is 'xxx...' End InitBootStruct Start LoadRAMDisk End LoadRAMDisk Start FinalizeBootStruct Start RandomSeed End RandomSeed ++++++++++++++++++++++++ Last 8 lines Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 11, 2018 Administrators Share Posted June 11, 2018 mabe try using aptiomemoryfix.efi clover driver instead of osxdrvaptio Link to comment Share on other sites More sharing options...
Dreer Posted June 11, 2018 Share Posted June 11, 2018 On 6/10/2018 at 10:31 AM, EXEPOWERED said: I don't know propably how to enable FixHeaders and what have I to edit in config file but, I have updated all kexts and removed NullCPUPowermanagement.kext, I will check if that helped. List of bugs I have found: - Brightness doesn't work (removal of NullCPUPowermanagement.kext doesn't helped) - WakeUp and Sleep doesn't work - HDMI output doesn't work - VGA output doesn't work - Sometimes system is not booting, (IGPU Busy error) - After clover update, you are unable to boot up system. (stuck on +/- 20% and reboots) - Touchpad gestures I'm problems too. Look my screens, maybe be equals. Link to comment Share on other sites More sharing options...
EXEPOWERED Posted June 11, 2018 Share Posted June 11, 2018 Try to enter Recovery mode, select startup disk and click to reboot and use it, it helps temporary when your system gets IGPU Busy Timeout, but I dont know how to avoid it in future. Link to comment Share on other sites More sharing options...
EXEPOWERED Posted June 11, 2018 Share Posted June 11, 2018 1 hour ago, Bronxteck said: mabe try using aptiomemoryfix.efi clover driver instead of osxdrvaptio How can I get it and use/install it? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted June 11, 2018 Moderators Share Posted June 11, 2018 Reinstall Clover and select the drivers from under drivers64UEFI when you select customize uncheck osxAptioFixDrv-64 or OsxAptioFix2Drv-64 and select AptioMemoryFix Note: @EXEPOWERED @Dreer The OP's system has Optimus Nvidia graphics. If your model does not, you should not use his files. Link to comment Share on other sites More sharing options...
Dreer Posted June 11, 2018 Share Posted June 11, 2018 I can not initialize it. I have to make connect the HD with a windows system, and edit or delete all the kexts manually. Yes, our model has a nVidea 720m card and I'm using tag -nv_disabled = 1 to disable it. I'm going to use the kexts that come from Olarias and try to add one-by-one until I find out who is giving the problem. But I think the problem is with NullPower. i'm using 10.13.5 MacOS High Sierra. Link to comment Share on other sites More sharing options...
EXEPOWERED Posted June 11, 2018 Share Posted June 11, 2018 1 hour ago, Jake Lo said: Reinstall Clover and select the drivers from under drivers64UEFI when you select customize uncheck osxAptioFixDrv-64 or OsxAptioFix2Drv-64 and select AptioMemoryFix Note: @EXEPOWERED @Dreer The OP's system has Optimus Nvidia graphics. If your model does not, you should not use his files. I had all of them selected, osxAptioFix2Drv-64, osxAptioFix4Drv-64, OsxAptioFixDrv-64 and AptioMemoryFix. But maybe I am wrong Link to comment Share on other sites More sharing options...
Recommended Posts