Administrators Bronxteck Posted September 11, 2011 Administrators Share Posted September 11, 2011 it's a setting in your bios... forgot the name but it has to do with dynamic speed or over clocking the cpu basically something like it, you have to turn it off... it's been posted a few time in the forum on a few machines with the option or you have speedster off and it should be on. Link to comment Share on other sites More sharing options...
Jon Posted September 11, 2011 Share Posted September 11, 2011 it's a setting in your bios... forgot the name but it has to do with dynamic speed or over clocking the cpu basically something like it, you have to turn it off... it's been posted a few time in the forum on a few machines with the option or you have speedster off and it should be on. Yes!!! @Bronxteck Thank you very much for the good idea. Your response was extremely fast. I changed BIOS option - Performace/Dynamic Acceleration to OFF, and after that Bus Speed increased to 800MHz as should be. Until now I have managed following thinks to work on D830 and OS X: nVidia graphics G84M [Quadro NVS 140M] 1920x1200 QE/CI - mirrored mode works Shutdown/Restart/Sleep Bluetooth Ethernet BCM5755M using /E/E/BCM5722D.kext FireWire 02 Micro Inc IE1394 Fingerprint reader works via ProtectorSuite TrackPad did not work well after Sleep. Installing VoodooPS2 problem solved also vertical & horizontal scroll now works Original Intel wireless card does not work for well known reasons. I will purchase other card on eBay (looking for DW1505) to solve this problem. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted September 11, 2011 Administrators Share Posted September 11, 2011 so was EDP missing any solutions for you? Link to comment Share on other sites More sharing options...
Jon Posted September 11, 2011 Share Posted September 11, 2011 so was EDP missing any solutions for you? EDP has answer for almost every problem. Unfortunately I discovered that sleep does not always work. Sometimes LCD screen stays in black (despite bios system passwd workaround). Sleep works mostly. After successful returning form sleep, ethernet card does not work anymore. It says - Not connected - Status: Cable Unplugged. Besides this minor problems I am very satisfied with EDP. I learned many system things about OS X, so I will definitely donate this project. Link to comment Share on other sites More sharing options...
albert e Posted October 20, 2011 Share Posted October 20, 2011 Yes!!! @Bronxteck Thank you very much for the good idea. Your response was extremely fast. I changed BIOS option - Performace/Dynamic Acceleration to OFF, and after that Bus Speed increased to 800MHz as should be. Until now I have managed following thinks to work on D830 and OS X: nVidia graphics G84M [Quadro NVS 140M] 1920x1200 QE/CI - mirrored mode works Shutdown/Restart/Sleep Bluetooth Ethernet BCM5755M using /E/E/BCM5722D.kext FireWire 02 Micro Inc IE1394 Fingerprint reader works via ProtectorSuite TrackPad did not work well after Sleep. Installing VoodooPS2 problem solved also vertical & horizontal scroll now works Original Intel wireless card does not work for well known reasons. I will purchase other card on eBay (looking for DW1505) to solve this problem. I have a D830 & Nvidia 140M graphics but the highest resolution is only 1280x800. Is my system laptop display the problem? Is there a D830 model for 1920x1200 display? Thanks. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 20, 2011 Administrators Share Posted October 20, 2011 usually it will tell you in the bios what your native resolution is. then compare that with in org.chameleon.Boot.plist which might be set at 1280x800x32 and make changes as needed you can use chameleon wizard to simplify the process then save your changes. 1 Link to comment Share on other sites More sharing options...
Stormblade Posted October 25, 2011 Share Posted October 25, 2011 I recently updated my SL 10.6.8 install with EDP 1.9 and it fixed pretty much everything. Truly awesome! One problem I seem to have developed though, is that the App Store has stopped working. When I try to install or update from the App Store, I get this message: 'Your device or computer could not be verified. Contact support for assistance.' This is new. It was working. Any ideas? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 25, 2011 Administrators Share Posted October 25, 2011 delete all networks and devices and re install if not the networking plist needs to be deleted also, if you don't have it, put EheternetBuiltIn=Yes in you org.chameleon.boot.plist Link to comment Share on other sites More sharing options...
Stormblade Posted October 27, 2011 Share Posted October 27, 2011 Bronxteck: Thanks for the help. So I checked for EthernetBuiltIn=Yes in the org.chameleon.boot.plist and it was there. I then deleted all networks, but I don't seem to have a networking plist, so I removed the IOFamilyNetworking.kext from my Extensions.mkext file. That actually solved some other issues I was having (like a new Ethernet device being created whenever I rebooted) but I am still having the App Store issue. Am I missing something? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 27, 2011 Administrators Share Posted October 27, 2011 only other thing i can think of is your smbios.plist or maybe you need a serial number in the plist? Link to comment Share on other sites More sharing options...
Recommended Posts