alfalus Posted November 1, 2017 Share Posted November 1, 2017 Both output (internal speaker & headphone) are working i already install this kext sir. Is there anything else to do before install the codec_commander directly ? Anyway, the mic is so low (both of internal and headphone mic). I'm trying to record the audio, but the sound of recording is so low. I think is under frequency or something else. How to correct this ? Link to comment Share on other sites More sharing options...
unklbee Posted November 1, 2017 Share Posted November 1, 2017 try this layout 13 AppleHDA-280.12-ALC270.zip Oh my ghost, it's work perfectly.. Speaker Internal, Mic Internal and Headphone Worked like a charm. Thank you so much sir 1 Link to comment Share on other sites More sharing options...
alfalus Posted November 2, 2017 Share Posted November 2, 2017 Can you test the mic with software recorder that available on app store ? Please let me know that your'e mic is working normally and can record the sound loudly. Because, my mic is so low to record the sound. Link to comment Share on other sites More sharing options...
InsanelyDeepak Posted November 2, 2017 Share Posted November 2, 2017 @alfalus use quickTime to record audio and try to increase volume input pm me will try to fix your issue @unklbee enjoy good sound 1 Link to comment Share on other sites More sharing options...
griftopia Posted November 2, 2017 Share Posted November 2, 2017 @Jake Lo - Patching info.plist for the dummy kext still did not load. @Herve - I see what you are saying. DSDT patches is "text" replacement. Kexts have binary patches OR Info plist patches. I failed to see that. I will read up on everything. *However* I've been seeing posts where people plagued by the same symptoms - distorted sound & clock losing time - suggesting a patched kernel is the solution since the vanilla kernel causes issue. Is this something I should pursue? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 3, 2017 Administrators Share Posted November 3, 2017 clock and audio issues sounds like TSC syncing issues Link to comment Share on other sites More sharing options...
griftopia Posted November 3, 2017 Share Posted November 3, 2017 Thanks Bronxtech! At least something new to try. I'm assuming you mean VoodooTSCSync. I will read up and give it a shot. But where do I get latest copy of the kext? I can only find very old ones. PS - If it's okay I'll send you message so we don't hijack thread any more Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted November 3, 2017 Administrators Share Posted November 3, 2017 well check in clover boot log to see what your frequencies are and if clover is detecting them correctly. look to see if they are correct or not maybe you can compare it with your cpu spec at ark intel site. then try correct it in clover config plist's cpu section. if not you can try old voodootscsync it still works but i think there was a reboot of the kext at insanely mac not too long ago, Link to comment Share on other sites More sharing options...
griftopia Posted November 6, 2017 Share Posted November 6, 2017 @bronxtech, finally hit upon the correct CPU and FSB frequency values. Sound is not perfect in the sense when I change the volume I hear crackle, but distortion is gone. And of course, my clock's not losing time anymore. So sticking with Voodoo 2.8.8. Will leave AppleHDA patching learning for another time. Link to comment Share on other sites More sharing options...
InsanelyDeepak Posted November 6, 2017 Share Posted November 6, 2017 @griftopia use latest voodoo has many fixes http://www.insanelymac.com/forum/topic/314406-voodoohda-290/ Link to comment Share on other sites More sharing options...
Recommended Posts