guimenez Posted November 10, 2016 Share Posted November 10, 2016 i'm trying now to setup my audio, the only thing i know is vendor:8086 and Dev ID:9c20.What can i do please?Thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 10, 2016 Moderators Share Posted November 10, 2016 Read the 1st post to determine your codecID Link to comment Share on other sites More sharing options...
guimenez Posted November 11, 2016 Share Posted November 11, 2016 Thanks for replying,i've tried 3 distros and only ubuntu gives me sound, but even with that i just have codec#0 and it's empty.I don't find nothing more inside Card0 What can i do more please?Thanks Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 11, 2016 Moderators Share Posted November 11, 2016 have you tried card1 codec0? Link to comment Share on other sites More sharing options...
guimenez Posted November 11, 2016 Share Posted November 11, 2016 I've 1 files in both.I've extracted and they have info there.One of them says ALC 283 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 11, 2016 Moderators Share Posted November 11, 2016 That's your codecID ALC283. There's a patched version found in Mirone's HDA autopatcher 1 Link to comment Share on other sites More sharing options...
osxfr33k Posted November 13, 2016 Share Posted November 13, 2016 @insanelydeepack, How are you doing. I had my audio working perfectly from Mavericks all the way until Sierra. The new IOAudioFamily has broken Audio Master slider control. There is audio max output and mute only from master volume. Apps with their own volume control such as Logic Audio work independently of the master control volume output and work as a master volume control should. Websites such as Youtube with their volume controls work the same way complete output control of volume but independent of Master volume. I have the Realtek ALC282 but my audio device is audio 2.1 (subwoofer) a second speaker. I see in your GitHub you have version ALC282 and gave it a try but no audio output, I think the nodes are different in my version of ALC. I would like to see this audio device make it to the AppleALC project but unsure how to get it there. I am not the original person who created the patch it was AreosJc from the Rogue forums also known as Aeros in the insanelymac forums. EmlyDinesh helped create a PatchAudio persistent kext from Aeros originally patched AppleHDA. He was the one who mentioned you had several files uploaded onto GitHub. I chatted with him today. I am still studying this guide and have not fully grasped it all yet. Could you lend a hand to see if you can come up with something, maybe a different layout, going from layout from 3 to 13 did nothing. It would be great to get this working in Sierra or add this to the AppleALC project to see if this would provide a fix to the master control? I have attached my Codec, Info.plist, Platform.xml and Layout.xml for convenience. Let me know if you can have a look. I even tried Mirone's Audio Patcher v1.6 and both ALC282v1 and ALC282v2 may have worked but I did not have 2.1 audio (subwoofer) working with those patches. I contacted Mirone and he told me I could run his patcher and dump the Info.plist and both ZML files and it would create all the files Patcher creates and although that worked fine I still ended up with a broken master volume control. Mrione may add this to his Patcher on the next release but a lot of good it will do in Sierra. Would AppleALC be any different or is this IOAudioFamily kext related only issue? I would also like to add Spdif if you have any experience with this. My Path Map is the first one "0" in Platform.xml Thanks Edited 11-23-2016: I got SPDIFOut to work finally. Now just need to know if I port my layout3 to layout13 as you did if I can get that issue with the Master Volume Control to work as it did in El Capitan. In Sierra its full output or mute even though the slider does move all the way to the right and left as it should. Maybe some AppleHDA or IOAudioFamily Binary patch needed for Sierra? The source is now available for IOAudioFamily.kext and the readme mentions some changes to the Master Volume Control. card1_codec#0_dump.txt card0_codec#0_dump.txt PatchAppleHDA_SPDIF.kext.zip Link to comment Share on other sites More sharing options...
waxfuzz Posted November 13, 2016 Share Posted November 13, 2016 Hi i have an ALC255 v2 but i can't make the internal mic work. I attach the codec dump. External mic works once if i plug it, if i disconnect , then never get work external mic. codec_dump.txt Link to comment Share on other sites More sharing options...
InsanelyDeepak Posted December 25, 2016 Share Posted December 25, 2016 Hi osxfr33k , I'm well , how r u ? I was out of Hackscene now I'm back alc282 my edition is specific to that laptop only , it will require some changes will fit to yours too Quote I got SPDIFOut to work finally. Now just need to know if I port my layout3 to layout13 as you did if I can get that issue with the Master Volume Control to work as it did in El Capitan. In Sierra its full output or mute even though the slider does move all the way to the right and left as it should. Maybe some AppleHDA or IOAudioFamily Binary patch needed for Sierra? The source is now available for IOAudioFamily.kext and the readme mentions some changes to the Master Volume Control. thats great news , do you having issue with using layout 13 ?? you can port it there's no logic behind Mirone is with 3 and I like no 13 most of my files are with it .. Please let me know if i can help you Regards Deepak Link to comment Share on other sites More sharing options...
InsanelyDeepak Posted December 25, 2016 Share Posted December 25, 2016 @waxfuzz, did you test my resource from Github ?? Link to comment Share on other sites More sharing options...
Recommended Posts