girardpallet Posted September 20, 2015 Share Posted September 20, 2015 Finally i fix it... , just plug the 8Go RAM memory to the other slot. thank anyway @girardpallet which recommendation are you referring to? Refer back to the last few posts. No issue for uranis. His Memory shows correctly as are mine. @uranis, No ,sdcard reader needs to be patch to work, not OOB. Link to comment Share on other sites More sharing options...
pkp7254 Posted October 1, 2015 Share Posted October 1, 2015 Hi Jake, is it safe to upgrade to El Capitan from Yosemite (10.10.5)? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 1, 2015 Moderators Share Posted October 1, 2015 Yes, but you'll need to add a few preparation: Upgrade to Clover v3270 and up Copy 10.10 folder in /EFI/Clover/Kexts and rename it to 10.11 or just rename the 10.10 folder as Other Add this to Clover config.plist to disable SIP (between last of KextToPatch and SmBios or Use Clover Configurator 4.24.0 <key>RtVariables</key> <dict> <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>0x67</string> </dict> For audio and boot glitches, add this to Config under KextToPatch, using PlistPro Editor, Textedit or Xcode <dict> <key>Comment</key> <string>SecondStagePatch 10.11</string> <key>Find</key> <data> AQAAdRc= </data> <key>Name</key> <string>IOGraphicsFamily</string> <key>Replace</key> <data> AQAAdBc= </data> </dict> <dict> <key>Comment</key> <string>AppleHDA #4</string> <key>Find</key> <data> gxnUEQ== </data> <key>Name</key> <string>AppleHDA</string> <key>Replace</key> <data> AAAAAA== </data> </dict> Now Download El Capitan from AppStore Launch the Installer and reboot On reboot, you'll see a new Clover boot option Your current OS X disk the installation disk the recovery disk Select the Installation Disk option Finish the installation Webcam will be missing, to fix Download FakePCIID package from Rehabman Install these to /S/L/E or /L/E FakePCIID.kext FakePCIID_HD4600_HD4400.kext FakePCIID_XHCIMux.kext Repair permission and rebuild cache sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / 1 Link to comment Share on other sites More sharing options...
uranis Posted October 1, 2015 Share Posted October 1, 2015 adding how or where exactly ? I m using Clover configurator is that Ok ? ( I m doing the update as well ) Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 1, 2015 Moderators Share Posted October 1, 2015 Clover Configuration will wipe out that section. You'll need plistedit pro or Xcode or text editor to add it. Put it between the last of KernelandKextPatches and Smbios. RtVariables BooterConfig 0x28 CsrActiveConfig 0x67 SMBIOS Upload your Config.plist if you want me to add it for you. Update: Clover Configurator 4.24 fixed the above issue Link to comment Share on other sites More sharing options...
Alex Rivera Posted October 1, 2015 Share Posted October 1, 2015 Thanks Jake, that's so kexts can be installed through kext wizard or other utilities right? Is there any boot pack for E7440 out there already? Last time I installed public beta (3 I think) I had a couple of issues with LCD brightness, USB 3.0 and headphones not working. Here's what SIP is and another method to modify (disable/enable) it (though I don't know if it works for hackintosh purposes) http://www.macworld.com/article/2986118/security/how-to-modify-system-integrity-protection-in-el-capitan.html Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 1, 2015 Moderators Share Posted October 1, 2015 Follow this thread. To fix the USB/Webcam issue, installed the fakepciid from the last post of the thread. Yes, disabling SIP will allow kexts to be install to /S/L/E or /L/E Link to comment Share on other sites More sharing options...
pkp7254 Posted October 2, 2015 Share Posted October 2, 2015 Hi Jake, I managed to modify the config file as suggested and started the installation. Just before the installation process the setup requested for a restart and after restart, it is now stuck at the Apple Logo. Tried booting in Verbose mode and this is what it says. *** [iOBluetoothController][ProcessBluetoothTransportShowsUpActionWL] -- Error!! -- Something went wrong in the setup process. Could not communicate with Bluetooth Transport sucessfully -- 0x2000 -- 0x8000 *** Please suggest. Link to comment Share on other sites More sharing options...
pkp7254 Posted October 2, 2015 Share Posted October 2, 2015 left it like that for about 30 min and now it says "AppleLPC:start - Could not find IOPlatformPlugin driver. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted October 2, 2015 Moderators Share Posted October 2, 2015 Try without cache. Link to comment Share on other sites More sharing options...
Recommended Posts