Alex Rivera Posted September 24, 2016 Share Posted September 24, 2016 (edited) HelloI'm using the bootpack posted here on my E7440 i5 (macOS Sierra 10.12.1), it works OK. (I'll update this bootpack with latest changes). With the 10.12.1 update, physical volume buttons are working again. Clover version: 3882 (10/28/2016) Just replace/update your touchpad and keyboard driver (VoodooPS2Controller.kext) with Dr. Hurt's Refined ALPS TouchPad driver Release 5 Final posted here, I must say this one is almost perfect! (Gestures, horizontal and vertical scrolling, trackstick, etc) amazing job Dr. Hurt. No preference pane though (Known issue with this kind of driver and Sierra) unless you update it with one from 10.11.6 or older. Rarely but sometimes it reboots or starts without sound (more often when rebooting) it gets automatically fixed with another reboot or power off & start. (This is probably a rebuild cache issue after an update)Hangs when trying to play iTunes movies, and certain video formats on the web. (still can't figure what's going on here...)For those using Fortinet VPN client (which includes antivirus for some weird reason...) I've found that Forticlient (5.4 latest version) is not compatible with macOS Sierra, it was causing some bad issues on my SSD partition, some examples were: an error appeared when booting into macOS (kext not compatible), longer times to load, long time to shutdown (30 seconds or more), I'm sure this caused my partition to die last week, I could not even mount it anymore and i had to format it... (Time Machine saved me), i reinstalled just to see if I had the same results and yes... it even caused an error again... Edited October 29, 2016 by Alex Rivera Link to comment Share on other sites More sharing options...
Administrators Hervé Posted September 24, 2016 Administrators Share Posted September 24, 2016 Webcam is usually USB internal. Check if it's reported in your SysProfiler. If it is, your USB ports are working but the camera may not be supported. As for audio volume and mute buttons not working, it's not something specific to your E7440, it affects all Hackintosh. It obviously results from changes Apple made to ACPI handling in Sierra. Link to comment Share on other sites More sharing options...
hoainama8 Posted September 24, 2016 Share Posted September 24, 2016 hi all I install 10.12 and some problem VoodooPS2Controller "Updated version 20160620 --> not working and I use last kext https://bitbucket.org/RehabMan/os-x-voodoo-ps2-controller/downloads but trackpad not working. Any help me? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 24, 2016 Moderators Share Posted September 24, 2016 Known issue. You need to replace trackpad.prefpane with version from 10.11.6 1 Link to comment Share on other sites More sharing options...
hoainama8 Posted September 25, 2016 Share Posted September 25, 2016 I install 10.12 clear and dell 10.11.6. So I don't trackpad.prefpane from 10.11.6 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 25, 2016 Moderators Share Posted September 25, 2016 Try here. 1 Link to comment Share on other sites More sharing options...
hoainama8 Posted September 26, 2016 Share Posted September 26, 2016 I have fix trackpad. Thanks Link to comment Share on other sites More sharing options...
girardpallet Posted October 1, 2016 Share Posted October 1, 2016 Hello, did you update from 10.11.6 to 10.12 from apple store ? thank Link to comment Share on other sites More sharing options...
Alex Rivera Posted October 3, 2016 Author Share Posted October 3, 2016 Hello, did you update from 10.11.6 to 10.12 from apple store ? thank Yes, twice in my case... (see edited post above) one was from 10.11.6 and the second time it was from 10.11. If you can't make Sierra installer to work after reboot or you are getting an error try these: Revert core storage from your drive, if you have any. (see here) Boot in recovery or with your Installer USB Sierra, El Capitan (probably any with disk utility will do the job) and from Disk Utility resize your OS partition, make it a little bit smaller, I've found on Apple forums that it needs to be at least 128 mb smaller for the temporal new boot Sierra volume installer to work (in my case I resized to be 1GB smaller) and you can reclaim the space after installation is complete. Regards 1 Link to comment Share on other sites More sharing options...
Alex Rivera Posted October 7, 2016 Author Share Posted October 7, 2016 (edited) 10.12.1 Public Beta 3 Fixes physical volume controls I need to try it more and see if it fixes other annoyances... macOS related of course (like Safari not loading pages sometimes, WiFi dropping, etc). 10.12.1 Beta 3 (16B2338c) 10.12.1 Beta 4 (16B2548a) Edited October 12, 2016 by Alex Rivera Link to comment Share on other sites More sharing options...
Recommended Posts