Baio77

I don't see EFI, Ioreg is also needed

The trackpad of this PC does NOT work, the DSDT would be needed to be able to adjust the ACPI , test this EFI in USB EFI OC 0.7.0 EFI.zip

Try this EFI, it should activate I2C, keyboard brightness control. modified SSDT to be able to boot even in dual boot with Windows. If you get to the new desk ioreg EFI.zip

EFI.zip Test This , ioreg

EFI.zip Test this

EFI.zip Test this in USB , ioreg . Are you using voodooHDA for audio, i would try to activate with ALC.kext, in my opinion it is better

I apologize for the bad English, I use the translator. Now the Lan works, check the battery and also the keyboard brightness control, tell me if it works. Did you add rename in XOSI config ???

test this EFI in USB , if it starts run ioreg again and pass it here EDIT : i forgot rename XOSI in config.plist, add it yourself EFI.zip

N1 : remove Fake SMC and plugin , insert this kext put them after lilu.kext VirtualSMC-1.2.4-RELEASE.zip N2 : For Kext PS2 and Trackpad these kext must remain active N3 : new method for brightness control https://github.com/acidanthera/BrightnessKeys remove rename in config I read you have Kaby Lake 7 series CPUs , SMBios is wrong you have to use MacbookPro 14.1 or 14.2 , I recommend you to fine tune . Also SSDT PMCR should not serve you because you have PPMC in DSDT origin, PMCR is used on Mobo 300 series or later , those mobo where is NOT present PPMC device. The Hackintosh world is constantly evolving, so EFIs often need to be adapted to new standards.

Test this SSDT , remove all ACPI in patch Remove rename device EC0 to EC and all rename device WEG takes care of everything the real change is the introduction of Darwin for windows OS booting via OpenCore SSDT-6x0G1 Haswell.aml.zip

can you post Ioreg of your configuration? I would like to merge ALL SSDTs into one SSDT , to do this I need ioreg like this

Test this EFI Clover 5134 my Dell Vostro 5501 EFI.zip

OC configurator Device proprieties add all pci list , save and rebot This a result

Test this EFI Clover 5122 + kext last version EFI.zip

We start on one side and begin to fix the EFI . N1 updates the Clover efi to V 5122 https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5122 do not upgrade to newer versions update efi run new ioreg and post new EFI

run ioreg and put it here, it serves to make accurate diagnosis, you have put in EFI Clover ACPI files, where they come from? What version of Clover are you using? never seen so many KEXT Put this EFI in USB and try to boot from USB if ioreg starts EFI.zip

EFI.zip Test this EFI . If you do not start photos of the block , you have to try to use my basic acpi files and try to make mix in the config and with the kext PS2 , I remind you that in Hackintosh there are continuous evolutions , what you have done in 2014 may have been outdated and according to me in the EFI you have passed initial there are many errors ACPI . Example you have 2 SSDT EC so duplicates , if you open SSDT PNLF read that it works on IGPU and you have it disabled by factory so it is NOT needed . SSDT HPET without a rename in config section ACPI Patch will never work. If you use SSDT EC, you don't need to rename in config EC0 to EC. If you use VoodooHDA I don't think you need any SSDT HDEF, I can still write things that are NOT good in your EFI and you can also answer that everything is fine for you, but technically I'm right. The parts highlighted in the photo are NOT needed

I saw from Ioreg to the Nvidia, this caught my attention, I have never done Hack on similar Laptop I am Italian, of course I am on these days

ACPI folder contains dsdt full patch + SSDT Plugin Test this ACPI.zip I have inserted these patches that work with the ASUS SMC kext plugin from LILU

1) you must always attach Ioreg + full EFI 2) see the image posted, your DSDT.aml is certainly NOT loaded, to use DSDT with OpenCore you must check the 2 boxes in the picture below Set like this to load DSDT I don't want to sound like a professor, I'm a normal user who has been doing Hackintosh for a few years. Look This https://github.com/Baio1977?tab=repositories ,all EFI do feature SSDT Hack Full Patch, whether Laptop or Desktop In Laptop need to patch battery use DSDT patch, because it is very complex to extrapolate the battery patch, but not impossible ... Open Core is also fine with DSDT Patch, just set well the EFI Example of EFI with DSDT Patch Excuse my English, I use translator

in my opinion in this initial EFI you passed me there are too many things that actually do not serve, so I start from 0, see if it starts this EFI ... SSDT Unique is the last thing I do, because it serves to insert necessary parts, consequently block in Verbose, as in your case EFI.zip

Try this EFI, if it starts ioreg of my EFI, I have fixed the kext, created SSDT Hack, this is a first step, something may NOT work, we fix a little at a time EFI.zip

@sleo Your configuration seems to have I2C in ACPI test https://github.com/VoodooI2C/VoodooI2C/releases/tag/2.6.5 post Ioreg

Post EFI and Ioreg

With this Kext you probably won't need any SSDT for brightness keys, you just have to test it. For Laptop Asus use This