Jake Lo

ignore the MacOSX folder, that's create when files are accessed from Windows. Use the EFI folder

both links worked just fine. I just tested them Either way, any of the EFI should work

Yes, partition the drive, make sure it's formatted to GUID require for Mac, Windows will also run in GUID. You can choose which os to boot from the OC picker.

see my response to @PhantomGhostX

you can generate a new SMBIOS serial, ROM, etc and updated config file later. Just want get the installation done 1st FYI, no need to quote me on your replies.

Replace the whole EFI folder or at least Boot and OC folders into the EFI folder because the files must be from the same version of OC. You can't have Boot folder from a difference version of OC

Have you tried searching the forum? Here's a couple : https://osxlatitude.com/forums/topic/17665-dell-7490-usb-c-not-working/ or https://osxlatitude.com/forums/topic/17640-latitude-7490-unable-to-update-to-macos-ventura/

still need the IOReg file

@Artisto You should usually update the kexts and sometimes OC to the latest before upgrading. If you're not sure, then you should wait to see how others succeed. Always have a working EFI boot disk handy whenever you update. You can either update the USB drive to test if it'll boot before updating the harddisk EFI or vise versa.

Try these. Rename to config.plist Post IOReg file for each if it booted Archive.zip

There's no indication that there's a built-in ethernet according to the IOReg file. Check your BIOS, make sure it's enabled. Remove IntelMausiEthernet and replace it with latest IntelMausi Remove ACPIBatteryManager, you already have SMCBatteryManager.kext Lastly, you have an issue with the truncated SMBIOS To fix it, enable CustomSMBIOSGuid Change UpdateSMBIOSMode to Custom in the config file

@mr.kasper You didn't provide the IOReg as requested Connect the monitor. Launch IORegistryExplorer.app and save the file Attach it here

Post IOReg file with the monitor connected. Are you connected via DP to DP? DP to HDMI?

Why would you need to press F12? Doesn't both MacOS show up in the boot option? I'm assuming you're using OpenCore.

ok, try this one config.plist.zip

give this a try Made minor adjustment to your config file config.plist.zip post IOReg file if it doesn't hang

Had you reset NVRam after the changes? DP should work OOB

Post full system specs Include IOReg file using IORegistryExplorer.app Include EFI folder for review From that, I would assume you didn't patch the HDMI port connection

what type of connection are you using? DP ? HDMI? Have you tried lowering the refresh rate?

Try switching smbios to MacBookPro11,4

Was it the same when running Monterey?

post ioreg file using ioregistryexplorer.app 2.1

disable hibernation, run this in terminal you might want to clear NVRam 1st before running sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo pmset -a hibernatefile /dev/null sudo pmset -a standby 0 sudo pmset -a powernap 0 sudo pmset -a autopoweroff 0

in the config file, under UEFI/APFS, change mindate and minversion from 0 to -1

OpenCore - Ventura Only Working: Full HD530 Graphics Acceleration Internal speaker / Headphone / Autoswitch (ALC293) Keyboard / Touchpad with VoodooPS2Controller (scrolling, left and right mouse button...etc) Wireless /Bluetooth - replaced Intel with DW1560 / DW1830 Brightness Slider with Fn+F11 / Fn+F12 HDMI / mDP / USB-C - Video / Audio 3 Displays (Internal + HDMI + mDP or USB-C to HDMI or mDP adapters) Internal USB ports HD Webcam USB-C to HDMI / mDP Display USB-C to USB-C Display Sleep / Wake with LID close / Open SD Card Reader Not Working: NVIDIA Quadro M2000M disabled via SSDT patching ThunderBolt (not tested) Installation: Download macOS Ventura Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to guide Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID To Enable track stick scrolling, install Smart Scroll.app Updated to OC 0.9.4 - Supports Ventura - Rename config-IntelWifi to config.plist if you're using an Intel Wifi / BT combo (not tested) - Dropped DW1820A, unable to boot even with the same patches from Monterey 7510_OC_0.9.4_Ventura.zip 7510_OC_0.8.5_Ventura.zip