Jake Lo

Post full system specs Include IOReg file using IORegistryExplorer.app Include EFI folder for review From that, I would assume you didn't patch the HDMI port connection

what type of connection are you using? DP ? HDMI? Have you tried lowering the refresh rate?

Try switching smbios to MacBookPro11,4

Was it the same when running Monterey?

post ioreg file using ioregistryexplorer.app 2.1

disable hibernation, run this in terminal you might want to clear NVRam 1st before running sudo pmset -a hibernatemode 0 sudo rm -f /var/vm/sleepimage sudo pmset -a hibernatefile /dev/null sudo pmset -a standby 0 sudo pmset -a powernap 0 sudo pmset -a autopoweroff 0

in the config file, under UEFI/APFS, change mindate and minversion from 0 to -1

OpenCore - Ventura Only Working: Full HD530 Graphics Acceleration Internal speaker / Headphone / Autoswitch (ALC293) Keyboard / Touchpad with VoodooPS2Controller (scrolling, left and right mouse button...etc) Wireless /Bluetooth - replaced Intel with DW1560 / DW1830 Brightness Slider with Fn+F11 / Fn+F12 HDMI / mDP / USB-C - Video / Audio 3 Displays (Internal + HDMI + mDP or USB-C to HDMI or mDP adapters) Internal USB ports HD Webcam USB-C to HDMI / mDP Display USB-C to USB-C Display Sleep / Wake with LID close / Open SD Card Reader Not Working: NVIDIA Quadro M2000M disabled via SSDT patching ThunderBolt (not tested) Installation: Download macOS Ventura Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to guide Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID To Enable track stick scrolling, install Smart Scroll.app Updated to OC 0.9.4 - Supports Ventura - Rename config-IntelWifi to config.plist if you're using an Intel Wifi / BT combo (not tested) - Dropped DW1820A, unable to boot even with the same patches from Monterey 7510_OC_0.9.4_Ventura.zip 7510_OC_0.8.5_Ventura.zip

@daemmon Is your fix better? Sure post it if it's beneficial to others with the same model

@yoshio He's using my files from here. Download the E7470 EFI Replace the config files inside OC folder with these. As the instruction from my guide give, the config is configure for Broadcom wifi/ BT combo If you have an Intel wifi/BT, delete the config file and rename config-IntelWifi to config Rename the E7470_OC_O to just EFI Place whole folder into the EFI partition of the USB installer... E5470.zip

post error

Make sure to update to latest BRCM* Use BlueToolFixup and not BrcmBluetoothInjector

the EFI you posted didn't have the kext I attached shown on the config file Here, replace the config with this and add the kext to your kext folder Archive.zip

https://dortania.github.io/OpenCore-Legacy-Patcher/

Haswell has dropped support for Ventura but you could look into OCLP (OpenCore Legacy Patcher).

disk is not even detected in the BIOS. Make sure it's attached securely or that's not defective.

your kext folder is missing AirportItlwm.kext, I'll assume you left it out in order to attach the zip file, if not make sure to add it with the Alpha version 2.2.0 You're also missing SSDT-GPRW.aml since you have the renaming under ACPI but without the aml file. Here' I added them and also kexts for SD Card reader test.zip

Post your latest EFI for Ventura and IOReg file

Post your EFI folder for review Did you click on the drop down from diskutil to show all devices?

Yes, you should upgrade the kexts as well. Give this a try 7490_OC085_Ventura.zip

I have never bothered with hibernation so you'll just have to experiment on your own. Read up on Dortania's guide for some info

Yes, generate for MacBookPro14,1, you can keep the ROM if you like

OpenCore - Ventura Working: Full HD530 Graphics Acceleration Internal speaker / Headphone / Autoswitch (ALC298) Keyboard / Touchpad with VoodooPS2Controller + VoodooI2C + VoodooI2CHID ( multi gestures working) Wireless /Bluetooth - replaced Intel with DW1560 / DW1830 / DW1820A Brightness Slider with Fn+F11 / Fn+F12 HDMI Video / Audio 3 Displays (Internal + HDMI + USB-C to HDMI or DP adapters) Internal USB ports HD Webcam SD Card Reader USB-C hotplugging (Wait 4-5 seconds before re-inserting) USB-C to HDMI / DP Display (Video and Audio) USB-C TO USB-C Display (Video and Audio) USB-C Dell Dock (WD15) / USB ports from Dock / Only one video output from Dock at a time though (either HDMI or DP) Sleep / Wake (no power blinking light but works) Not Working: NVIDIA Quadro M1000M disabled via SSDT patching ThunderBolt {not tested) Installation: Download MacOS Ventura Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to other Dell guides Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID Download ComboJack.zip Open terminal and run the following commands: sudo spctl --master-disable cd ~/Downloads/ComboJack sudo ./install.sh Disable Force Click and haptic feedback in Touchpad preference (This enables left click mouse button to drag and drop) Updated to OC 0.9.4 - Supports Ventura - Rename config-IntelWifi to config.plist if you're using an Intel Wifi / BT combo Precision_5510_OC_0.9.4 - Ventura.zip Precision_5510_OC_0.8.5 - Ventura.zip

No Intel wifi kext is still in Apha, no stable version yet For Bluetooth, get the latest firmware version here You'll need to add IntelBTPatcher as well. See here

hey adding this kext to kext folder and in the config file In BIOS, make sure you have UEFI / AHCI enabled CtlnaAHCIPort.kext.zip