Jake Lo

Don't remember what SPSN and APLF are for, leave them out if you want. But you need Plugin Type=1 and PluginType enable for powermanagement without using generated SSDT.aml

Your model don't have the Nvidia card, so you could leave off the 1st 2 patches, required only to the Nvidia model [01][syn] Fix PARSEOP_IF/CLOSE_PAREN Errors [02][syn] Fix PARSEOP_ZERO Error (aggressive) Warnings are fine, just need errors fixed

Try reinstalling latest Clover (4700) on top and try again.

Yes, known fact for all Hackintosher, Intel Wifi are not supported Try DW1550 or look through our list of supported cards here You need a mini PCIe card. M.2 are for Broadwell and higher I believe. At least for my Dell's

Use the bootpack from here instead

Yes DP Audio worked perfectly with AppleALC and Lilu with layout-id 15. I only tested DP to DP. I'll give HDMI to DP a try and report back when I can Here's my Mojave bootpack, will work for OSX below as well but sleep issue on HS. Replace into /EFI/Clover. No other kext in /S/L/E or /L/E 9020_A22_Mojave.zip Update: Confirmed HDMI to DP works perfectly with DP audio 6/07/2019 - Latest bootpack. If you want internal audio, change to layout-id 16 but rear jack won't work. 9020_Mojave.zip

You need to add HFSPlus.efi into /EFI/Clover/Drivers64UEFI See my Clover guide here with link to files

Try this, replace contents into /EFI/Clover. Works for Mojave too. https://osxlatitude.com/applications/core/interface/file/attachment.php?id=20045

Try FakePCIID.kext + FakePCIID_BCM57XX_as_BCM57765.kext

What is the VEN/PROD ID of your device?

Try this, replace the contents into /EFI/Clover Make sure you reset your BIOS to Load Default, Apply. Then go back and set to UEFI/AHCI/Secure Boot Disable If it's still not working, post your Clover folder E7240_Mojave.zip

send debug file, need to verify if it actually disabled the Discrete graphics

try adding this to the patched folder SSDT-DDGPU.aml.zip

Try generating new serial for SMBIOS, reboot and try again

Try adding the VEN/PROD ID into the info.plist What is the VEN/PROD ID of your device?

You're right, I didn't pay attention to that. I think they're doing away with 32 bit so it's just UEFI Drivers

No. You'll need the EFI Shell boot disk to set it or just use a patch to bypass the requirement if you're now comfortable with modding the BIOS.

Boot without the DSDT/SSDT

Did you follow the last few posts starting here using AppleALC with layoutid 15?

You need to disable the GTX, it's draining your battery.

There's an option in Clover Configurator under CPU to enable TurboDisable. Not sure what's that for, you could give it a try. Maybe read about it in the Clover wiki

You're missing SSDT-PNLF.aml in /EFI/Clover/ACPI/Patched for Brightness Your Wireless DW1705 aka AR9565 is not a recommended device. See here Repair permission and rebuild cache again. If still no audio, report back. SSDT-PNLF.aml.zip

Try updating your SMBIOS with later date, but you could keep your serial #.

Post your Clover folder and what version of Clover are you running?

Boot to Clover, press F2 and then F4. Continue to OSX Run debug report and post it here.