Jake Lo

what type of error, I'm not seeing any. Maybe you're using an older compiler? I see the file is patched by MaLd0n, he's a respectable guy in the Hackintosh world.

You have not set the SMBIOS Try adding the memory details in the SMBIO section

try this, added it to properties instead since you're using WEG config.plist.zip

Here, I removed the layout-id from HDEF. You can inject it in the Config file under Devices/Audio. Just enter the # 13, 11, or 56 to test for the best result DSDT.aml.zip

Post boot error

Try with this DSDT. You had set Darwin to both 2009 and 2015. I had removed 2009. See how it goes DSDT.aml.zip

You could take a look at mine here I had tried #16 but for some reason it doesn't work for me, still getting FB panic, but with Rehabman's kextToPatch works which basically is the same 0x16260006,0x16260004/etc, 32MB BIOS, 19MB framebuffer, 9MB cursor bytes (credit RehabMan) I think I'll just stick with BIOS patch with EFI Shell, more reliable and the prefer way if you're not worry about bricking the system. 10 & 11, I think WEG fixes it, I'm not sure, I still enable the renaming for both As for 12, I have created USB kext with FBPatcher.app

Try changing SMBios to MBP13,1

post debug files HibernationFixup.kext won't work without Lilu.kext in the same directory BrcmNonPatchRAM2, not needed if you're using BrcmPatchRAM2.kext VoodooPS2Controller is from Rehabman for Synaptics? If so, preference pane should work. Might have to make sure Battery status is working.

@liemhatang try this one config-liemhatang.plist.zip

also try sudo nvram -c

You need to change the layout-id to 11 for HDEF and HDAU in the DSDT and disable the AppleHDA patches in Config file. Here patched it for you, just replace these 2 files. In the kext/Other folder, remove the following kexts: EAPDFix IntelGraphicsFixup That should do it E5450.zip

If you have AppleHDA_ALC280.kext in /L/E or /S/L/E, remove it. Make sure you have vanilla AppleHDA in /S/L/E Disable the 3 AppleHDA patches in kextToPatch in Config file. Add AppleALC + Lilu to /EFI/Clover/kexts/Other Repair permissions and rebuild cache

Don't see SSDT-PNLF.aml in /EFI/Clover/ACPI/Patched Try this, replaced into /EFI/Clover/ACPI/Patched Had to remove PNLF patch in your DSDT as well. 7559.zip

Sleep is not the issue, it's waking it that's not working in HS. Is it working in Mojave? Yes, switch to AppleALC with layout-id 15

Try layout-id 28 if you're using AppleALC.kext + Lilu.kext

Enable legacy Option ROMS in BIOS

try this, replace into /EFI/Clover E7x50_Mojave.zip

Better to open a new thread for Mojave and post the issue there. Screenshot helps.

Hmm, reason I asked is because I see AppleIntelBDWGraphicsFramebuffer (10.3.6) in your log and it should be 10.36.19 if you're running 10.13.6. So not sure you got those file versions from. Here, replace these into /S/L/E, files from my 10.13.6. Repair permissions and rebuild cache Broadwell_10.13.6.zip

I mean where did you get the High Sierra app to build the installer? Appstore, torrent ...etc.

What's the source of your installer?

That fakeID is for Haswell HD4400/HD4600, not for Broadwell HD5500. Did you remove any Broadwell kexts from /S/L/E?

Note: Kexts must be inside Other or 10.13 or whatever OSX version you're installing to be read/load, or in /L/E. No need to repair permission or rebuild cache if kext are moved around in Clover kexts. What same error?

Lilu.kext + AppleALC.kext will run perfectly fine in /EFI/Clover/kexts/Other, no need to move to /L/E.