Jake Lo

Make sure to use latest Clover with the new Config what version are you running?

Add/update contents to /EFI/Clover/kexts/Other Add to Config boot arg -alcbeta -lilubetaall should get you audio...maybe...use layout-id 3 if not already Mojave_Audio.zip

Try this Config and delete SSDT-2.aml and SSDT-3.aml Add AppleALC.kext to /EFI/Clover/kexts/Other, removing AppleHDA_ALC293.kext Post KP if still encounter issue with the new files by booting with verbose + debug 0x100 mode config.plist.zip

Ok, then better not tinker with the BIOS. If minStolen patch is not needed or DVMT kext, then don't use them. Will you still have graphics fully?

post your clover folder for review

let's try changing FakeID to 0x43BA14E4 and see if it makes a difference. Might have to reset again. If still fails try DW1510 if you have it available to test and see if it encounters the same issue

Looks fine. Check the antennas. Maybe try reversing the black and the white. So it stays on OFF the whole time? Try reset your network settings: - Go to /Library/Preferences/SystemConfiguration/ and delete these files: CaptiveNetworkSupport com.apple.airport.preferences.plist com.apple.network.eapolclient.configuration.plist NetworkInterfaces.plist - Go to System Preferences > Network, delete all connection. Then restart - Go to System Preferences > Network, add your connection again.

Everything looks good in the IOReg, it should be working. Try removing these 5 patches in Config, no longer needed with 4 added kexts PCI error 1, 2, & 3 AirPort Extreme & NGFF (fvco) Run networksetup -setairportpower en2 off networksetup -setairportpower en2 on

Try replace DSDT and the 2 kexts with the latest to /L/E Repair permissions and rebuild cache 5480_I2C.zip

what version did you upgrade from? check in Clover Options you have FixHeaders enabled.

I guess you have set the minimum 64mb in the BIOS then...so no patch or DVMT kext are needed

I don't see FakePCIID_Broadcom_Wifi.kext in /E/C/k/Other as suggested, also not showing up in IOReg. Try also changing FakeID for Wifi under Devices to 0x433114E4 in Config file By the way, your wifi is in EN2

Try disabling the MinStolen patch in Config file and add IntelGraphicsDVMTFixup.kext to /EFI/Clover/kexts/Other

Run this and attach the file

Can you connect to wired? DW1510 doesn't have bluetooth

Don't need SSDT.aml if pluginType is already enabled in the Config file. No, searching won't work until wifi is turn ON. Try this, assuming wifi is on en1, change accordingly networksetup -setairportpower en1 off networksetup -setairportpower en1 on Try adding FakePCIID + FakePCIID_Broadcom_WiFi to /EFI/Clover/kexts/Other

So trackpad not working or no gestures? For audio, did you copy kexts from /EFI/Clover/kexts/Other/LE to /Library/Extensions? QCA6174 is not supported Post debug files for further evaluation...

What Clover resolution?

for sleep, run this command to determine issue log show --style syslog | fgrep "Wake reason" Try this Config. If still issue, post debug files config.plist.zip

try toggling with commands and reboot networksetup -setairportpower airport off networksetup -setairportpower airport on

For Brightness Control, you use Fn+F3 and Fn+Insert For Wifi, check the right side next to the headphone jack. Make sure the toggle switch is set to ON. For the all other issue, please post the debug files

See if this works, replace contents into /EFI/Clover Make a backup first 7548_A08.zip

For Wifi/Bluetooth https://bitbucket.org/RehabMan/os-x-brcmpatchram/downloads/ https://github.com/lvs1974/AirportBrcmFixup/releases https://github.com/vit9696/Lilu/releases For Audio Did you copy the kexts in /EFI/Clover/kexts/Other/LE to /Library/Extensions Repair permissions and rebuild cache

@Phil Lu Any progress with the new bootpack patched from your files?

You'll need to patch SSDT to disable the M270 Boot to Clover, press F4. Continue on to OSX Compress and attach Clover here For sleep, could be due to the M270 not disabled.