Jake Lo

Update Lilu.kext to v1.2.3 IntelGraphicsFixup v1.2.7 If you have previously installed VoodooHDA, make sure you had removed AppleHDADisabler.kext and VoodooHDA.kext Is Sierra installed to MBR format?

Files are not clean. Clear the Origin folder, reboot and press F4. (Just once) Compress and attach Clover folder including all the files

Replace ApplePS2Controller with VoodooPS2Controller in /EFI/Clover/kexts/Other For audio, make sure to copy all the kexts in /EFI/Clover/kexts/Other/CopyTo/L/E to /Library/Extensions Repair permissions and rebuild cache

Boot to Clover, press F4 Compress and attach the Clover folder here for review. I'll patch the new files for you.

Means you have a discrete graphics card along with Intel HD 620 ok, replace these into /EFI/Clover 5480_1.10.4.zip

That last error usually means you don't have FixHeaders enabled, but the Config shows that it is. So could be the Clover version not detecting it. Upgrade Clover with the latest version with these setting, remove the other Aptio Fixes if they are checked. Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\AptioMemoryFix

don't you mean DW1820? That's what you had in the 1st post

you forgot to mention your model also has Optimus...anyway it'll be disabled via DSDT patch Replace the Config file. Remove all DSDT/SSDT in /EFI/Clover/ACPI/Patched and replace with attached 5480_HD620_v1.10.4.zip

Weird. It's missing SSDT-2, there's 2 of SSDT-6, SSDT-7, SSDT-8, and SSDT-9. Clear Origin folder again. Boot to BIOS, set to Load Defaults. Apply. Go back to set it to the following. Might have to reboot to do this UEFI AHCI Legacy Option ROMS disabled TPM disabled Secure boot disabled CPU XD Support enabled Boot to Clover, hit F4. Just once, give it maybe 2 seconds. Check Origin folder for any issue. Compress and attach it again.

Files look fine but you could have different specs than the OP. Post your system's specs. BIOS version... Clear the Origin folder, reboot to Clover. Press F4. Compress and attach the Origin folder here

Upgrade Clover with latest version Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\AptioMemoryFix Remove/deselect other Aptio Fixes if enabled

Try this, replace contents into /EFI/Clover E7270_ufdlim.zip

@ufdlim The Origin folder is a mess. Clear the folder. Reboot to Clover, press F4. Compress and attach it here again for patching.

If you can boot with it, then use it. It's files from mottoyin I believe.

attach debug files

boot with installer and select the SSD to boot

Try this config, works for me to show both graphics, but as Hervé said, only the Intel will be working. The other is just for cosmetics perhaps and draining battery life. config.plist.zip

Download this Launch ESPMounterPro.app Mount both EFI partition. Copy the EFI from USB to SSD Hopefully it'll work with files running from SSD

You need to move AppleBacklightInjector.kext to /Library/Extensions, not at /EFI/Clover/kexts/Other Repair permissions and rebuild cache

You can switch the Alt(Option) with the WinKey(Command) by going into Keyboard preference by selecting Modifier Keys. Since Atheros AR5B91 is from an Apple system, it should be working out of the box. Check the side for toggle switch. Make sure it's set to ON.

add FakePCIID + FakePCIID_XHCIMux to Clover kext folder

Follow the post install from my E7450 guide For trackpad, it's using a generic mouse kext which works fine. If you have it to appear in preference, you need to replace the PS2 kext with an Alps touchpad kext found here

If you have it booted, yes, do the post install.

Sounds like caching wasn't working the 1st time Cheers!

try adding Lilu.kext + NvidiaGraphicsFixup.kext to Clover kexts https://github.com/vit9696/Lilu/releases https://github.com/lvs1974/NvidiaGraphicsFixup/releases