Jake Lo

I don't use OC configurator. You could try ProperTree. I only use Plistedit Pro to do all my edits.

the config file is different from the one I posted in the 1st page. It's not matching OC 0.7.4 files that I had posted. Seems to be from an older OC file

What's the highest resolution for the displays? Are you connected with DP to DP or using adapter like HDMI to DP or DVI to DP?

I don't know if W5170m will or not. To test, you need to disable SSDT-DGPU.aml in the Config file and change the BIOS to disable Switchable Graphics. This will disable the Intel graphics and enable only w5170m only. Optimus is not supported in Hackintosh. Another option, if your issue is to fix wake from sleep is to make some changes in the BIOS. I forgot to mention this in my guide. Go to the BIOS, create a new boot option, name it DVMT or whatever. Point it to /EFI/Boot/DVMT/Bootx64.efi Save and reboot. At start up, press F12 Select DVMT or whatever name you gave it At the grub prompt, select 1 This will reboot the system, boot to your MacOS Test sleep / Wake

Looks like you're running Clover loader. Are you using the latest version? Does it have more than 1 disk? perhaps it's booting from the different EFI partition with older / different Clover files. Check your BIOS

Post the EFI folder. Looks like there might be a mismatch of OC files ie Config.plist from different version of OC drivers. Is the issue happening on your or your friend's 5580? What version of MacOS are you running? There's different version of Airportitlwm for different version MacOS.

Give this a try You made a few mistake with the update You rename HFSPlus.bak but config file is still pointing to it You config file is not that from OC 0.7.5 You can't just update the drivers without the corresponding config file No mixing Also you have in boot-arg vsmcgen=1 Not sure that needed anymore in new OC, but I left it in anyway MSI Z490 OC0.7.5.zip

Select F12 after boot and select the boot drive Also check the BIOS under boot options. Make sure you don't have old OC boot option there. if there is, remove it.

Kabylake is either HD620 or HD630, either way, the config should work for both graphics.. Make bios settings are set correctly. Best to set it to load Default. Safe, reboot, go back and set it to Enable UEFI / AHCI Disable Secure Boot

Can you post a new IOReg file?

It's a Kabylake, so probably HD620. Use the bootpack from the 2nd post and replace the config.plist a few post below that to fix the NoTouchID error

Try this one, set SecureBootModel to Disabled if it doesn't boot Latitude 5480 HD520 OC_0.7.5.zip

should be the same as Catalina or Mojave. What issue are you having? Post EFI and IOReg file using IOregistryExplorer.app v2.1

2 or 3 displays? Can you post a new IOReg file?

Just noticed your Drivers folder and config file only has OpenRuntime.efi. You'll need HFSPlus.efi on both

ok, try this one config.plist.zip

Ok, give this a try. Using some files from Lorys89's 7280 Latitude 5480 HD520 OC_0.7.5.zip

Try this Make sure to keep a backup boot disk incase it won't boot config.plist.zip

Any other version shows as corrupted when I open it with 2.1. It opens if I use version 3.0+ but it doesn't look right. If you look at x86PlatformPlugin, on the right when you expand CPUStates, you'll see all zero's. With 2.1, it'll be in numbers. Anyway, it's my preference. Looking at your IOReg file, I only see 1 display connected to port 6. Is this the HDMI or DP display? Maybe attach one IOReg for each display connected so to determine which port is use for each display type. Just notice your EFI folder has no Config.plist

Post IOReg file with the displays connected using IORegistryExplorer.app v2.1

post your current EFI

@Jazzoo Sure, see here @FoUStep Yes, should work for your Monterey too, they are similar hardware

Look like the issue is due to your 4k display. Follow this thread

Give this a try, updated to OC 0.7.5 Updated kexts and replaced a few as well Just rename it as EFI and replace it Latitude 7490 - OC0.7.5.zip

did you upgrade all the kext and OC to 0.7.4? Post your perfectly working EFI