Jake Lo

See FAQ regarding Hibernation I'm not seeing any Bluetooth in the USB section, are you sure this card has bluetooth combo? Add this Config to /EFI/Clover. During Clover boot, go to options->Config and select to boot from this Config file. If it works for the Wifi, then you could rename it to Config.plist replacing the old config-AR9565.plist.zip

Look in the FAQ section #1 Can't help you if we don't know what Wifi device it has... :

Replace the files in EFI with this and add the attached into /EFI/Clover 5558_A07_HS.zip

Nope, same version that works on Sierra will work on HS. You can try removing from /L*/E*, rebuild cache Reboot, re-add kext and repair permission and rebuild cache again.

Try this for Wireless AR9565 Not sure what bluettooth it has. Check under USB section of SysInfo for productID and VendorID For audio, I'm not seeing AppleHDA_ALC283.kext in the output you have posted above. It needs to be cache in order to work. I also see error 77. Rerun the commands until you see AppleHDA_ALC283 or reboot and then run again. Might take a couple of reboots Should see a successful rebuild of cache without error sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo kextcache -Boot -U /

Does your system also have the AMD graphics card as OP? Same BIOS version?

Are you still having audio issue? Run this in the terminal and post result here sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

Ok, remove VoodooPS2ControllerR6 in /EFI/clover/kexts/Other and replace it with this one Screen capture is a lot nicer if you just use alt+shift+4. Highlight the area you want, or alt_shift+4, follow by spacebar, click on the Window and hit enter. File saved to the desktop.

You could go through this guide, incredibly detailed and long http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/

Post screenshot Status and PCI List with DPCIManager https://sourceforge.net/projects/dpcimanager/ Your touchpad, is it an Alps or Synaptics?

https://www.reddit.com/r/hackintosh/comments/525dsb/getting_imessage_working_on_el_capitan_and_sierra/

Replace config for HDMI config.HDMI.zip

files goes into /EFI/Clover/ACPI/Patched replacing the old, not Origin

HFSPlus.efi - GitHub so you're able to boot...how? with USB installer?

waiting on the IOReg file

so you're able to boot??? after copying the kexts, ignore the errors. Run permission fix and rebuild cache sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /

Post screenshot of Status and PCIList with DPCIManager https://sourceforge.net/projects/dpcimanager/ Launch IOReg IORegistryExplorer_v2.1.zip with HDMI display connected, save and attach file Does system also have DisplayPort connection?

here, replace the DSDT/SSDT, not merge and the Config file bios v1.16.4_alternate.zip

Go into /System/Library/Extensions, find those kexts, right-click, Move to trash. Do you see HFSPlus.efi in /EFI/Clover/driver64UEFI? Add it if it's not.

Send me the Origin folder and I'll patch them for you or you could upgrade your BIOS to 1.17.5 and use the alternate v1.17.5. You can just replace the ACPI folder, but you'll also have to modify the Config file under SSDT SortedOrder since the SSDT numbering are different.

Looks like you're using bootpack 3550, why not use 3540 that's correct for your system? Here replace the attached file into /EFI/Clover overwriting the current files in your HDD EFI partition. You shouldn't have to add any additional patching. Remove all those kexts you have installed above, add only the 4 kexts found in kexts/Other/LE to /Library/Extensions repair permission and rebuild cache Post the error is it's not bootable. 3540_Sierra.zip

It's missing SSDT-7.aml. Did you leave it out purposely? Try replacing DSDT/SSDT with attach HS3.zip

can you attach the Clover folder with the changes, just want to verify they are correct. Try also to upgrade to the latest Clover v4243

I assume you have BrcmPatchRAM2 & BrcmFirmwareRepo in /L*/E*? Boot to Clover GUI, hit the F4 key, continue on booting OSX Mount the EFI partition, navigate to /EFI/Clover/ACPI/Origin If you don't see SSDT-14-DptfTabl.aml, then you should use the DSDT/SSDT from the alternate bootpack instead. If you do, then try disabling Legacy Option ROMs in the BIOS.

I see a lot of missing or wrong files from your attachment, I believe this is from your internal EFI partition which is why it won't boot 1) The Extra folder is for Chameleon loader, won't work on Clover 2) There's no kexts found in /EFI/Clover/kexts/Other or any 10.xx. folder, perhaps you install them to the system directory 3) The Config file is almost empty, not sure how you're able to boot with that as it is now 4) Files in /EFI/Clover/Drivers64UEFI does not reflect those if installed from v4243 Since you're able to boot with the USB Installer, you should replace the Clover folder from the USB EFI partition to the HDD EFI partition, that should fix your boot issue from the HDD. Please list the kexts you have install with kext utility, run this from terminal, post the result here sudo touch -f /L*/E* Sudo touch -f /S*/L*/E* sudo kextcache -i /