Jake Lo

airportd won't help with your wireless card as it's not supported.

Yes, you can connect your hackintosh to your Mac laptop and run myfix. Replace the Extra folder with my bootpack, run myHack/myfix (quick). Important, make sure to select your USB hdd and not the root ( your real mac), or you might brick it.

Here you go Extra-E7440.zip

open terminal and run lspci -nn, post the output here most like you have an Intel Wireless card and will need to be replaced as it's not supported. Check here for compatible list. as for sdhc reader, you can use voodoosdhc.kext. You might have to add your ven / dev ID to info.plist to work. Follow guide here. things that won't work are: finger scanner smart card reader vga port

I have an E7440 (WIP). You could try my bootpack. It's really close to the E7240, but with bigger screen. Still trying to get audio to work, currently Mirone is helping me patch it. Full QE/CI is working and USB 3.0. No issue with usb 3.0 ports to do the build.

I'm using this debug version by yeahoon and this script by gohmac. You can follow guide here to have the script automatically run after logon. You just need the voodoops2controller.kext in E/E and run myfix(quick), nothing else. And enable clicking in Trackpad under preferences. Use side scrolling instead of 2 fingers which can be a bit of getting use to.

You should put the broadcom kext in my bootpack and rename it to Extra. You could rename the default to generic or something. Run myfix (quick). Then try again. Your USB structure looks fine.

Basically the bootpack replaces the generic Extra folder in your USB Installer root. So you could just replace the folder and run myfix (quick). That does the same thing. Download the version for Mavericks since you're installing Mavericks.

Download both bootpack and broadcom kext above. Put broadcom kext in Extension folder. Run myHack from the usb installer, select install Extra and point to the bootpack above. Once done, boot your system with the USB installer with -v switch. You should be able to get full graphics, mouse, keyboard, LAN, and even sleep. Report your result.

Try this bootpack and include this for Broadcom LAN. Report your result.

See if this works too for the non-vpro system. Post your result please.

try booting with -v GraphicsEnabler=Yes IntelCapriFB=3 If it kernel panic, list the error here. You said it kernel panicked with AppleIntelCPUPowerManagement.kext, can you list the version number. If you're using the generic bootpack, it has nullcpupowermanagment and should not encounter error you mentioned. Please list what's in your Extra/Extension folder. You could read more about myHack here.

Since you have resolution 1366x768, you don't need the patched AppleIntelFramebuffercapri. You need to restore the vanilla version to SLE.

if you read my entire guide, there's a fix at the bottom to remove the "invalid partition" error. To restore the unpatched file, look at "/Applications/Install OS X Mavericks.app/Contents/SharedSupport", you find InstallESD.dmg. If you mount that dmg (disk image), you should find the file. Install it back to SLE, run myfix (full).

Remove AppleIntelFramebufferCapri.kext in E/E and run myfix(quick) and reboot. See if that makes a difference. That is patched file for 10.9.0.

Please list your system's specs. The files are for 10.9.0, I might have to update a new patched file for 10.9.1

Just set the z value if you're using the RehabmanMerge version and enable clicking in Trackpad. Problem is you'll have to set it after each reboot.

You just need to install Chameleon on it. Launch myHack and select install Chameleon, point it to the new drive. I'm assuming your new/backup drive is attached with an USB adaptor or HDD caddy.

UPDATE: For Yosemite / El Capitan / Sierra / HS / Mojave / Catalina with Clover Guide, see 3rd post below!!! Mavericks Guide with myHack (Chameleon) Specs: i7 - 4770 3.4GHz| 8GB ram | HD4600 | 128GB SSD | Mavericks 10.9 GM| BIOS A05 Work in Progress! Build USB Installer with myHack Download and Extract bootpack Extra.zip Relaunch myHack, select Install Extra, select USB Installer as target drive. Select "Use my Own" and browse to Extra above Boot with USB Installer ( Make sure to plug monitor to displayport, use bottom DP if you only have 1 monitor) Format disk to GUID and Extended Journal and start the build When prompt, select "Use My Own" and point to Extra on USB Installer Select Yes 3 times to delete issue kexts Wait a few minutes, system will automatically reboot Complete the install Working: HD 4600 Full QE/CI USB 3.0 ( not tested for speed) Dual display is working with the 2 built-in DisplayPort Sleep / Shutdown / Reboot with Dual monitor working using either DP monitors or active DP/DVI adapter ( thanks to ktbos' exhaustive testing) WIP (Not working) Sleep works but on resume, black screen fixed - add -gux_defer_usb2 to org.chameleon.Boot.plist Sleep with Dual monitor connected with passive DVI to DP adapter Built-in Speaker / Headphone jack - loud pitch noise fixed thanks to ktbos - get boot pack under updates below Note: Make sure to set SATA Operation to AHCI. For best result, set it to the Default, apply and then set SATA Operation to AHCI. Make sure to remove external video card or disable it in the BIOS.

that gets cached if you cold shutdown your system. Interrupt the boot on reboot, remove the -v and boot normally. Then shutdown or restart to see if that's resolved.

Click on the link on my signature file below under E6430 with nvs5200m /Mavericks (3rd one down). Just leave out the SSDT files as that's patched for i7-3720qm in the bootpack. Post your result after following the guide.

do you have a non-vpro processor? If so, check out my guide here with help from tarfoh to disable the nvidia card through DSDT. I haven't gotten the vpro version to work yet.

Can you boot with -v and post the error message?

If you remove the 8gb ram, does it boot again? No, still no sleep for nvidia. If you have time and an extra hdd, try removing all the nvda* and geforce* kexts from SLE, and enable optimus. See if you could get that to boot, you might then be able to get sleep with HD3000. You'll have to mod DSDT to enable HD3000 too.

I don't know how Chameleon will handle both GUID and MBR, but you could try running Chameleon Wizard from your OSX disk , and install method to Boot0md. I don't have windows 8, but I'm running windows 7 with optimus disabled and both external monitors works fine through the dock. What I do is configure it through the Nvidia Control Panel (setup multiple displays).