Hervé

In all likelyhood, you have an Intel 3945 wireless card in your D830 and that's not supported. You'll need to replace that by a Mac OS X compatible card such as DW1390, DW1395, DW1490, etc. These are Broadcom-based cards. Some Atheros cards work too. Do a search in the forum, there are tons of threads on this very matter.

DW1390 and DW1490 work OOB. DW1395 requires a kext to be installed in /E/E (either BCM43xxx kext or patched IO80211 kext). All these cards are available for pennies on ebay.

Ways to check which wireless card you have:

1) Apple menu -> About this Mac -> System Report -> Hardware -> PCI interface: Intel 3945 will be Vendor id 0x8086 and Device id 0x4222/0x4227/0x4888

2) From Windows, look at your Network Adapters under Device Manager

3) Remove plastic casing with On/Off button, remove all 3 keyboard screws and lift it. The Wireless card will be right under the keyboard. Read up the sticker.

Bios is updated to A18, not sure about the nVidia bootpack where can I get this and will I need it? everything seems to be working now, installing atm

Lookup at the top of your current forum window. Click on the "EDP" tab under the large "OSXLATITUDE" banner. Read-up the documentation and install ML following our MyHack-EDP process.

Ok, well just follow the process as documented in the EDP section of the web site. That'll get you through.

You would not boot 64bit kernel on that machine. You're using a myHack installer setup with our EDP D430 bootpack, right? What are the specs of your D430 (RAM, CPU, HDD)?

Are you using a retail copy of 10.8.2? It's required to have all installation files... Also, did you update your BIOS to A17/A18 and setup your BIOS parameters as per recommended settings?

I'm assuming that you're using the D630 nVidia bootpack, right?

Could you try to reboot with -v flag and report back what it says when it stops?

Mmm, blank screen issue might be resolved with DSDT patching, in a similar way as it's done for D620 or D630 GMA models. Worth investigating as it may avoid the need to patch the FrameBuffer kext and support update to 10.7.5.

Lion 10.7.4/10.7.5 should be reachable with replacement of AppleACPIPlatform kext with that of an earlier release (10.7.2 or 10.7.3 for instance). Copy the 10.7.3 version (or earlier) to /E/E and delete the other one from /S/L/E. Repair permissions + cache and you should be good for reboot to 10.7.4/10.7.5.

To answer a recurring question, here are recommended BIOS settings that are known to work on D430 (Intel 945GMS chipset/GMA950 graphics) under Snow Leopard, Lion and Mountain Lion (MLPF). These settings were tested and verified with BIOS A09 as well as custom OSXL BIOS A09.

Onboard Devices:
. Integrated NIC = enabled
. Internal modem = enabled
. External USB ports = enabled

. Integrated USB Hub = High Speed
. Parallel port = none (or whatever)
. Serial port = COM1
. PC Card and 1394 = enabled

. ASF Mode = Off
. Microphone = Enabled
Video:
. Ambient Light Sensor = Off
. Brightness = max
. Brightness (AC) = max

. LCD Panel Expansion = enabled
. Primary Video = Onboard Video
Security:
. Admin Password = not set
. System Password = set     (/!\ Must be set on GMA950 laptops or Kernel Panic (=crash) on wake /!\)
. Internal HDD PW = not set
. Password Change = Permitted
. Password Bypass = Reboot & Resume Bypass
. Wireless Switch Change = Denied
. Wi-Fi Catcher Change = Denied
. CPU XD Support = Enabled
. TPM Security = Off
. TPM Activation = Deactivate
. Computrace = Deactivate
Performance:
. Multi Core Support = Enabled
. SpeedStep Enable = Enabled
Power Management:
. Auto On Mode = Off
. Auto On Time = xxxxxx
. USB Wake Support = Enabled or Off (USB wake only operates when laptop is on mains and may cause Sleep/Instant Wake issues)
. Wake on LAN/WLAN = Off
Docking:
. Undocking Method = Hot Undock

. PCI Slot Monitoring = Enabled Silent
. Universal Connect = Enabled
POST Behavior:
. Adapter Warnings = Enabled
. Fn Key Emulation = Scroll Lock
. Fast Boot = Minimal
. Virtualization = Enabled or Disabled (only required to run virtual machines)
. Keypad (Embedded) = Fn Key Only
. Mouse/TouchPad = Touchpad-PS/2
. Numlock LED = On
. USB Emulation = Enabled
Wireless:
. Internal Bluetooth = Enabled
. Internal Wi-Fi = Enabled (/!\ keep to Disabled if you have an Intel card, they're not supported and need to be replaced /!\)
. Internal Cellular = Enabled
. Wireless Switch = All
. Wi-Fi Catcher = Enabled

The above settings are compatible with sleep/wake mode of operation (hibernate mode 0).

Thanks, BIOs settings thread for the D430 now created here: https://osxlatitude.com/index.php?/topic/2036-bios-settings-d430

There are some parameters that you should change... Everything is slow because your USB ports are set to Compatible, i.e. slow mode.

Just re-run the EDP kext installation tool and select a different TrackPad kext. No need to remove anything manually beforehand. the EDP script takes care of everything for you.

Try Nawcom BootCD method. That's how I started on the D630. Just download the image and burn it to DVD. Boot off the DVD and then load your SL image. It's very easy.

The D430 runs extremely well under Snow Leopard, a tad slower under Lion. Now regarding your performance issue, I'd suggest you look into the BIOS settings. Check for SpeedStep being enabled. When you boot the installer, I'd also advise to interrupt the process and enter boot option "USBBusFix=No"; that often removes Keyboard/Mouse issues with Lion installation.

Not having a D430 at hand, I'd be much obliged if you would post the complete list of BIOS settings parameters so that we can advise on best/recommended settings in a similar fashion as what was done for the D620, D630 and D830.

https://osxlatitude.com/index.php?/topic/1869-bios-settings-d620/

https://osxlatitude.com/index.php?/topic/1868-bios-settings-d630/

https://osxlatitude.com/index.php?/topic/1901-bios-settings-d830-nvidia-nvs-135m/

Thanks in advance.

The BT module is not difficult to add, physically speaking at least. However, you have to make sure that its ROM has been enabled/activated from within Windows before it can actually be used in OS X. Otherwise, it's detected, but unusable.

Look at the dedicated thread in R&D section.

There's no need to install Windows to update the BIOS. Just download the recovery BIOS from the OSXL web site (Top menus: Tweaks -> Dell -> Custom BIOS Updates) and simply copy it to a USB key. Take out the battery, disconnect power cable, press END key and reconnect power cable. When battery LED appears in RED, count 1-2 and release END key. This normally loads up the BIOS .hdr file off the USB key and copies it to NVRAM. The laptop will then reboot with new BIOS.

Are you using our myHack+bootpack installation method?

Good, welcome to the community of Hackintoshed D630s.

nVidia 135m or 140m?

Make sure you're running on BIOS A17 or A18 and that your settings are as per listed in dedicated thread. If you follow the process as documented in EDP section, you'll be Ok.

At install, boot with option 'USBBusFix=No', it usually fixes the lack of keyboard/trackpad issue, otherwise you'll need USB Keyboard + Mouse.

When you run EDP, don't use the pre-defined values but install the following kexts instead:

- ANV-Slice modified VoodooPS2 controller

- NullCPUPowerManagement

- SleepEnabler

- Emulated SpeedStep

- VoodooTSCsync

- patched AppleHDA for D630

- VoodooBattery

The run the Hibernation fix and install Chameleon. Install Chameleon Wizard too and edit your Boot plist in /Extra to tick-off USBBusFix option if it is selected.

I can guarantee this works on a D630 nVidia 135m.

You have a OS X-compatible Wireless card, right?

If you have a copy of retail Snow Leopard, you can always do a basic installation with Nawcom BootCD. This will give you a sufficient base from which to create your myHack USB installer.

Credits & thanks to BronxTeck and those folks who initially documented the now-obsolete ATI Radeon X1300 fix (Azimutz, Brent Anderson, etc.).
Research done on Vostro 200 SlimTower model, as pictured below.
 

 


 
Target OS X releases:

• Snow Leopard 10.6.8 -> done
• Lion 10.7.5 -> done
• Mountain Lion 10.8.2 -> done

I successfully installed SL 10.6.8 / Lion 10.7.5 / ML 10.8.2 with myHack 3.1.2 on that system and it's 99% fully functional.

The specs:

• Foxconn G33M02 motherboard
• modded/unlocked Award BIOS 1.0.16, supporting HDD AHCI mode selection (see www.bios-mods.com). It also works with standard BIOS with HDD set on RAID mode.
• Intel G33 chipset
• Integrated Intel GMA 3100 graphics (totally unsupported in Mac OS X, a supported PCIe card must be used)
• Intel C2D E8600 3.33GHz FSB-1333MHz CPU
• 4Go DDR2-800 RAM
• Intel 82562V-2 10/100Mb built-in Ethernet
• Realtek ALC888 audio (7.1)
• ATI Radeon Pro X1300/X1550 (RV516 chip) 256MB graphics card (low-profile, fanless, 1 DVI dual-link + 1 S-Video). PCI dev id=0x7183.
• TEAC CA200 internal-USB 19-in-1 card reader
• Dell-branded Logitech wireless keyboard + mouse (bluetooth with USB BT dongle as pictured above)

Status at 06Jan is as follows:
Working:

• ATI Radeon X1300 card is unsupported by standard Chameleon 2.1 branch, however GraphicsEnabler branch from Azimutz supports 'legacy' ATI injection ('ATiGraphicsEnabler.Dylib' in /Extra/modules + various 'boot' files to choose from (depending on HDD partitions arrangements) - many thanks Azimutz!). Latest release (v2.1 r1515 at time of writing) does support ATI X1300 with dev id 0x7183.
• full QE/CI with ATI X1300 achieved under SL (with EVOenabler kext for ATI X1000 series (patched plist to reflect exact card model) + ATI X1000 series kexts (patched with dev id). All resolutions from 640*480 to 1680*1050 are available and working on my 20" widescreen LCD. It's work-in-progress under Lion.
• 64bit kernel mode under SL supported thanks to Chameleon ATI injection
• wireless (bluetooth) keyboard + mouse work OOB. The multimedia buttons even work too!
• audio (with VoodooHDA kext)
• built-in Ethernet (with AppleIntelE1000 or Intel82566MM kext, provided it holds dev id 0x10c08086 in the plist, otherwise, patch kext)
• TEAC card-reader works OOB. Tested with SD + xD + Sony ProDuo + SmartMedia cards
• SpeedStep @2.0/2.33/2.67/3.0/3.33GHz  (with EDP emulated-SpeedStep)
• display sleep/wake (sleeps Ok through active corner or energy savings setup)
• system sleep/wake (wake to be confirmed, because I have doubts), with apparent wake from keyboard and/or mouse click/move fully supported

Not working:

• display does not appear to wake from computer sleep; screen stays off

Obviously, this PC will need a different and supported graphics card for ML, the current one being limited to full resolution (here 1680x1050x32) w/o acceleration in the absence of 64bit ATI X1000 kexts... Low-profile passive/fanless nVidia GeForce GT610 (or GT620?) appears suitable candidate.
 
NB:

• all initial OS X installations done with myHack + generic Extra folder and no DSDT table. DSDT patching was required afterwards for system tuning (shutdown/restart, HDD icons, etc.).
• regular Vostro 200 MiniTower should work just the same or better: it has same motherboard and, taking full size expansion/add-on boards, can support a much wider choice of graphics cards.

- - - - - - - - - -
Edit #1: 8 Jan 2013
. following DSDT table extraction and patching with BronxTeck's assistance, system now shuts down properly.
. got computer to sleep & (apparently) wake by taking out NullCPUPowerManagement + SleepEnabler kexts that I had installed by default
 
- - - - - - - - - -
Edit #2: 9 Jan 2013
. after tuning of ATI Radeon X1300 graphics kext, display sleep was confirmed operational. Can be activated through active corner. Display wakes without issue on mouse move/click or keystroke.

- - - - - - - - - -
Edit #3: 11 Jan 2013
. validated update to SL 10.6.8 from 10.6.3. All Ok with usual ACPI kext replacement.
. tuned-up ATI Radeon X1300 graphics under SL -> full QE/CI now 100% operational. Details here: https://osxlatitude.com/index.php?/topic/1579-lion-1074-on-dell-optiplex-755-with-radeon-x1300-128-mb/page-2? (please note that dual-display setup was not tested and probably requires EDID tuning in EVOEnabler kext).
. 64bit kernel supported and tested under SL, all thanks to Chameleon ATI injection.
. full QE/CI under Lion is on-going. At present, only resolutions is supported (through standard ATI framebuffer).

. DSDT table fine-tuning on-going, I'm hoping to find a fix for Wake issue soon.
. Model added to EDP (without any specific graphics support for Lion and ML).

- - - - - - - - - -
Edit #4: 20 Jan 2013
. validated update to ML 10.8.2 from 10.8. All Ok, straight update.
. audio Ok (with VoodoHDA 10.8.1), SpeedStep Ok, card reader Ok, only graphics were limited as expected due to unsupported card.
. full QE/CI under Lion is now being investigated with RadeonHD alternative. More to follow on this in due course.

. no progress to date on DSDT final tuning.
 
- - - - - - - - - -
Edit #5: 17 Feb 2013
. further to introduction of EDP5.0 and release of Chameleon r2181, ATI Radeon X1300 card appears supported with just the patched kexts under SL10.6.8; no need of Azimutz's branch boot file + ATI module any more. No impact to 64bit kernel mode operation.

My apologies, I guess I misunderstood you and was thinking Trackpad. I don't believe the TrackPoint is supported on the D Series.

Haaaaa, indeed if "Install Chameleon" was run, that would have screwed the partition...

Sandra, did you just run the "Install Extra" on your MBP's HDD or was it the "Create 10.x installer"?

Mick, it doesn't sound like a GUID/partition issue, does it? It seems to me more like the system files are screwed up.

If that card is supported in OS X (and it looks like it would be/is), why not, but it's a half-size mini-PCIe card, so bracket will be required in a D Series laptop.

I'm reading reports of successful OS X operation with Atheros AR5B195 AR3011 combo Wifi+Bluetooth cards, although some say that BT is non-functional after sleep (something experienced on our D Series with DW1395 + DW360 under SL only).

Fat32 should get you up to 32GB or thereabout; I've used a 32GB USB key formatted fat32 before and I think it was RW-able from MacOS (but can't remember).

Regarding BT modules, look here: https://osxlatitude.com/index.php?/topic/1824-bluetooth-adapters/ All my D6x0 run a BT module (4 fitted with DW360, 1 with DW350).

Hi and Welcome,

Don't worry, seat back and relax, help is on the way! Be patient, it's coming from Holland...

Same HDD NTFS-formatted partitions are Read-Only by default in OS X, unless there's a fancy tool to allow it. From Windows, MacOS-formatted partitions are unreadable by default, but MacDrive tool (not free) allows full access to them. No idea from a Linux partition.

Maybe a FAT partition could be RW from all OSes but I don't know.

I'd keep them self-contained if I were you, best way to avoid issues.