[Closed] AppleHDA patching requests

[uuufo]

Dang, I have been trying so hard to get this done myself.  Have spent days learning about patching AppleHDA with no luck.  Is there anyone who can help me?  I have a Samsung Laptop with ALC269VC.  I've attached my files.  I'm running 10.9.2. Thanks!

 

edit:  Forgot to mention, if I use the kext and DSDT edit here: ALC269 VC2 HD 2.1 WITH the included IOAudioFamily.kext, I get sound from headphone jack, but not from internal speakers.  Without IOAudioFamily I get no device found.  I've even added my own configdata to this kext with same results.

codec_dump.zip

[EMlyDinEsH]

Try this and send me know your system log/ioreg if you have problems. Use the layout 28 DSDT patch.

AppleHDA_Patched__ALC269_2.1.zip

[EMlyDinEsH]

Can anybody help me?

 

codec_dump.txt, DSDT.aml and original AppleHDA from 10.9.2 (2.6.0) --> Link Here

config_data work on 10.9.1 but not work on 10.9.2

 

Can you send me your logs for 10.9.2 and your working 10.9.1 kext?

[uuufo]

Try this and send me know your system log/ioreg if you have problems. Use the layout 28 DSDT patch.

 

Thanks for responding!  With this one, also required me to install IOAudioFamily.kext, and now in system preferences it shows "Headphones" all the time, instead of only when headphones are plugged in like before.  I am able to get sound from headphones when they are plugged in, but not internal speakers at all.  Attached are the files you requested.  Also, thanks for your Elan trackpad kext, its working great on this machine

system.zip

uuufo-ioreg.ioreg.zip

[Lasan]

Can you send me your logs for 10.9.2 and your working 10.9.1 kext?

 

Please helpme, this my logs and kext on 10.9.1 Kext and Log

[uuufo]

Well I now have speakers working, but no subwoofer.  I can live with that!  Thanks again for you help.

[Jake Lo]

 

Please helpme, this my logs and kext on 10.9.1 Kext and Log

Can you try booting with HDAEnabler=Yes and see if it works?

[ericw12]

Followed both HDA and HDMI guide, and got sound working, and HDMI and VGA out working. 

 

Both the HDMI audio does not working. 

 

For AppleIntelSNBGraphicsFB.kext, 

 

I have to switch the line of VGA and HDMI and get both working like the following:

06 02 00 00 00 01 00 00 09 00 00 00

02 05 00 00 00 08 00 00 06 00 00 00

 

In Mavericks' sound pref, there is no HDMI audio output device.  In Linux, I have another codec3, which I dumped, and it is all about HDMI audio, and I don' t think the guide talked about that at all.  

 

Any suggestion please?

Spoiler

Codec: Intel CougarPoint HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862805
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
    rates [0x0]:
    bits [0x0]:
    formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
  Power states:  D0 D3 CLKSTOP EPSS
  Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
  Converter: stream=0, channel=0
  Digital: Enabled
  Digital category: 0x0
  IEC Coding Type: 0x0
  PCM:
    rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
    bits [0x1e]: 16 20 24 32
    formats [0x5]: PCM AC3
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
  Control: name="IEC958 Playback Con Mask", index=0, device=0
  Control: name="IEC958 Playback Pro Mask", index=0, device=0
  Control: name="IEC958 Playback Default", index=0, device=0
  Control: name="IEC958 Playback Switch", index=0, device=0
  Control: name="ELD", index=0, device=3
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x1, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=01, enabled=1
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x02
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x80]
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x58560020: [N/A] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x03
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x80]
  Pincap 0x09000094: OUT Detect HBR HDMI DP
  Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
    Conn = Digital, Color = Unknown
    DefAssociation = 0x3, Sequence = 0x0
  Pin-ctls: 0x40: OUT
  Unsolicited: tag=00, enabled=0
  Power states:  D0 D3 EPSS
  Power: setting=D0, actual=D0
  Connection: 1
     0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono

 

 

[Jake Lo]

Did you patch your DSDT too?

[ericw12]

Yes. I did.