InsanelyDeepak Posted October 30, 2017 Share Posted October 30, 2017 High sierra 10.13 sir. Thank you for your reply send me vanilla AppleHDA for 10.13 Link to comment Share on other sites More sharing options...
unklbee Posted October 30, 2017 Share Posted October 30, 2017 Here is my Vanilla AppleHDA.kext 10.13 AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
alfalus Posted October 30, 2017 Share Posted October 30, 2017 Could you tell me more from this step Now, we assemble the calculated codec verb commands so we can use for AppleHDA patch. <01471c10 01471d01 01471e13 01471f99 01470c02 01871c20 01871d10 01871ea1 01871f04 01971c30 01971d01 01971ea3 01971f99 02171c40 02171d10 02171e21 02171f04> To This Final codec verb step .. DISABLING THE NODES (PIN COMPLEX) THAT ARE NOT USED: We should disable the nodes that the codec is not using, so we can avoid any issues from them. Use the following the verb data for disabling those nodes and calculate verb commands. Verb data for disabled node: F0 00 00 40 Final codec verb commands with disabled nodes are: <01271cf0 01271d00 01271e00 01271f40 01471c10 01471d01 01471e13 01471f90 01470c02 01771cf0 01771d00 01771e00 01771f40 01871c20 01871d18 01871e81 01871f04 01971c30 01971d10 01971ea0 01971f90 01a71cf0 01a71d00 01a71e00 01a71f40 01b71cf0 01b71d00 01b71e00 01b71f40 01d71cf0 01d71d00 01d71e00 01d71f40 01e71cf0 01e71d00 01e71e00 01e71f40 02171c40 02171d10 02171e21 02171f04> I'm confused because before the final codec verb is only 4 node that is (14,18,19,21). Then in the final calculation there are many node as you can see above (12 until 21). From where that all nodes except (14,18,19,21) ? Please tell me more. Anyway sorry for my bad english Link to comment Share on other sites More sharing options...
InsanelyDeepak Posted October 30, 2017 Share Posted October 30, 2017 for getting Input/output you just need for 4 nodes 14 = dec 20 , 18 = 24 , 19 = 25 , 21 = 33 , use it verbs and pathmaps , you dont need to care about rest but in somecase or somehow nodes are not in use mess with other nodes so its better to disable them like this guide says personally i never disable them everythings works fine Link to comment Share on other sites More sharing options...
InsanelyDeepak Posted October 30, 2017 Share Posted October 30, 2017 Sierra actual version numbers ? i will try to get some result soon Link to comment Share on other sites More sharing options...
Vales93 Posted October 30, 2017 Share Posted October 30, 2017 Thx a lot, I tried with Sierra 10.12.6 Link to comment Share on other sites More sharing options...
griftopia Posted October 30, 2017 Share Posted October 30, 2017 @Jake Lo - Yeah I figured LE or CkO might not make a difference. The thing is because I still get distortion like with VoodooHDA I'm wondering if problem is much wider? I know the sound card works because this laptop has windows on other drive and sound works fine there. Please let me know if there is a way to load AppleALC before AppleHDA. As per docs, that's the only thing I'm not doing right now because I don't know how. EDIT: Keeping the kexts in CkO loads kexts in this order: Lilu, AppleALC, AppleHDA. Still getting distortion. So even this is a closed door Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 30, 2017 Administrators Share Posted October 30, 2017 you are not supposed to mix patches with applealc. all audio is supposed to be stock including clover config patches. only layout id is needed. https://github.com/vit9696/AppleALC/wiki/Installation-and-usageas for voodoohda crackling you can try changing the kHz in midi prefpane. another thing that can cause stuttering in audio is bad TSC of the cpu frequency. Link to comment Share on other sites More sharing options...
griftopia Posted October 30, 2017 Share Posted October 30, 2017 @Bronxtech. I know what you are saying. I was simply explaining I did some experimentation. I DID try each of these mutually exclusively 1) VoodooHDA + AppleHDADisabler 2) AppleHDA + config.plist patch using AppleHDA patcher app (I posted above) 3) ALC + Lilu with layout-id = 3 with DSDT patched (I posted above) and I did verify with IOReg So I didn't mix and match anything. I was simply explaining the results of 1 and 3 were identical - I get sound but it is distorted. Also each time, I tried every frequency setting in MIDI app. It didn't help. With 2 I was not even able to get sound. Which is why I initially came to this thread when JakeLo suggested I should try ALC approach first. So I can take any suggestions for option 2) above now and I have a question. I just saw there is another way to generate patched kext in the AppleHDA patcher app - the "Jarvis" way. Not able to understand the documentation for this, but will it work the same way as "Mirone? Link to comment Share on other sites More sharing options...
griftopia Posted October 31, 2017 Share Posted October 31, 2017 Okay I just realized that aDummyHDA.kext is not loading for me. I tried CkO, LE and SLE, and with the last two I have repaired cache and permissions. My config.plist is patched as well, and my layout-id is injected as 3 as evident in IOReg. So what is the reason for my kext to not load. Is there a way to debug? Link to comment Share on other sites More sharing options...
Recommended Posts