Jump to content

Dell Latitude E6330


peekstar

Recommended Posts

Hi Jake,

 

No I haven't yet, I'm still in the process of getting Mavericks fully functional on my 6330 so will try this soon.

 

I think on Mountain Lion the volume slider on the menu bar didn't synchronise with other volume settings(ie keyboard buttons) so I switched to VoodooHDA.

Will report back here once I've tried it.

 

Cheers

Link to comment
Share on other sites

Jake,

 

I've tried your AppleHDA from your bootpack and it does indeed work well!

The volume slider syncs up and speakers, headphones and internal mic all work.

The external mic from the combo port doesn't work though, and HDMI audio is also not working.

Interestingly though, when looking in system profiler, the hdmi audio and external mic are listed, they just don't work when plugging something in.

 

I'll have a look through your kext and check with my current workings on AppleHDA to see if I can get these to function.

 

Cheers

Link to comment
Share on other sites

  • Moderators

Jake,

I've looked through the kexts and the codec ID's are the same(0x111d76df or 287143647).

Would you know why external mic and HDMI audio don't work?

Different verbs, pathmaps or DSDT edit needed?

Do all audio ports work for you?

 

Cheers

I never tested the external mic since I never use it. HDMI audio does work, perhaps you need a modded AppleIntelFramebufferCapri.

Check tutorial here, but leave out the VGA section, it has not been working for the Dell Ex30 models.

Link to comment
Share on other sites

Indeed I did need to modify AppleIntelFrameBufferCapri.

As you suggested, I didn't bother with VGA, just hex edited to enable HDMI audio.

Now it works! It doesn't automatically switch over to it when I plug the HDMI cable in but that is no biggie.

 

Just need to figure out the external mic and I'll be there I think.

 

Cheers again

Link to comment
Share on other sites

  • Moderators

Indeed I did need to modify AppleIntelFrameBufferCapri.

As you suggested, I didn't bother with VGA, just hex edited to enable HDMI audio.

Now it works! It doesn't automatically switch over to it when I plug the HDMI cable in but that is no biggie.

 

Just need to figure out the external mic and I'll be there I think.

 

Cheers again

Which port did you use? I believe 205 should work. I'll include this on my guide. Thanks for confirming.

 

0205/0304/0406 00 00 00 08 00 00 06 00 00 00

Link to comment
Share on other sites

Which port did you use? I believe 205 should work. I'll include this on my guide. Thanks for confirming.

 

0205/0304/0406 00 00 00 08 00 00 06 00 00 00

 

Yep, I used 0205 for revision id 3. 

 

Cheers

03 00 66 01 01 02 04 02 00 00 00 04
00 00 00 01 00 00 00 40 10 07 00 00
10 07 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
05 03 00 00 02 00 00 00 30 02 00 00
02 05 00 00 00 08 00 00 06 00 00 00
03 04 00 00 00 04 00 00 81 00 00 00
04 06 00 00 00 04 00 00 81 00 00 00
Link to comment
Share on other sites

Hi Guys,

 

Some updates here. I've tried every combination (forum.osxlatitude.com/index.php?/topic/2945-guide-for-enabling-vga-and-hdmi-in-intel-hd4000-gpu/) for enabling VGA. I used a three connector setup and tried all the 0602 combinations (alter kext, rebuild, reboot, detect) until my fingers bled, but alas to no avail. Ended up ordering a mini-HDMI to VGA. Still this one itches, so I will look into it during the holidays.

 

The Atheros 9280 arrived the other day. Work out of the box. I have excellent throughput, so I have the right antenna order. The old one/two ended up on the one/two on the Atheros. Third one was put aside with a piece of tape.

 

I also have the WWAN DW5560. Ended up with three USB modems detected, but no WWAN. The DW5520 howto was not helping me out either. Anyone any pointers on that one? Or do I need to order another WWAN module.

 

cheers,

Martijn 

Link to comment
Share on other sites

  • Administrators

Indeed, not all WWAN modules appear as such in OS X; however, this does not prevent them from running well as USB modems… I have one of those in my D630 and although I never managed to get it registered as a WWAN module (which would give me the nice little GSM signal strength icon on the menu bar), I can still get it on the menu bar as a 3G dial-up modem and it'll work fine.

Link to comment
Share on other sites

Yep, I had quite a few attempts at getting VGA working without success.

I think Jake posted somewhere that it is impossible on E6X30 laptops.

 

I have fixed AppleHDA though.

I have this working nicely on Mavericks. After trying Jakes HDA for E6430 I found a slightly different one on InsanelyMac(which enabled ambient noise reduction on internal mic). I then enabled LineIn on this which fixed the combo port. 

But, the Mic/LineIn has really low sensitivity. So, once I have played around some more with that I will post the kext if anyone is interested.

 

Cheers

Link to comment
Share on other sites

×
×
  • Create New...