yogia79 Posted June 8, 2015 Share Posted June 8, 2015 Hi EmlyDinesh, I have tried to reset the bios by pulling out the cmos battery (30 mins), install kext 2_8_5_Final but still no luck. Attached is my system files. Please help to investigate.. Thanks much, BCM94352HMB Combo Card, Yosemite 10.10.3 with Clover MacBookAir_Yogi.zip Link to comment Share on other sites More sharing options...
sssyurrr Posted June 8, 2015 Share Posted June 8, 2015 z97n gaming 5 with bcm94352hmb now works great, bluetooth starts maximum in 30 sec after system start, great!!! yosemite 10.10.3, clover Link to comment Share on other sites More sharing options...
yogia79 Posted June 8, 2015 Share Posted June 8, 2015 Hi sssyurrr, How did you managed it to get it working? Did you do something with clover config?Did you tapped pin 51?Cheers, Link to comment Share on other sites More sharing options...
sssyurrr Posted June 8, 2015 Share Posted June 8, 2015 hi!nothing special, I installed with clover, acpi tab in clover configurator without all checkboxes, then I used kext utility to install btfirmwareuploader and bcm4352 (not sure about numbers) kexts, that's allsure, I copied atheros, hfsplus etc kexts to 10.10 and drivers folder.I can share my clover config and I can write step by step instruction what I did if it can help Link to comment Share on other sites More sharing options...
BalutFX Posted June 8, 2015 Share Posted June 8, 2015 Version 2.8.5 fixed bluetooth for me. Thanks!! Link to comment Share on other sites More sharing options...
yogia79 Posted June 9, 2015 Share Posted June 9, 2015 Hi sssyurrr,I have tried to include bcm4352.kext as well in my system, but still no luck. A bit history, before yosemite, my laptop running maverick with wifi & bluetooth working flawlessly (BCM94352HMB - Device ID: 04CA 200B). I tapped pin 51 so i can turn ON & OFF bluetooth via sys pref. After upgrade to Yosemite 10.10.3, my bluetooth works around 2 hours, after that disappeared. Until now i'm struggling to bring back the bluetooth but still no luck. Hmmm.. now i'm clueless and begin to think to switch to USB dongle instead Cheers, Link to comment Share on other sites More sharing options...
lisai9094 Posted June 10, 2015 Share Posted June 10, 2015 Anyone tried 10.11. Bluetooth failed to work. It was fine on 10.10.3 Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 10, 2015 Administrators Share Posted June 10, 2015 yeah same here BT shows in usb but is not loaded for my hp elite book on 10.11 i have not tried adding my device id's to the new brcm kext Link to comment Share on other sites More sharing options...
lisai9094 Posted June 10, 2015 Share Posted June 10, 2015 10.11 problem solved. Seems the solution is to inject IDs to BroadcomBluetoothHostControllerUSBTransport.kext Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted June 12, 2015 Administrators Share Posted June 12, 2015 yeah i forgot to post back adding the id's got the BT detected and loading. but it might be on apple firmware Link to comment Share on other sites More sharing options...
Recommended Posts