girardpallet Posted November 9, 2014 Share Posted November 9, 2014 From any working real mac run iMessageDebug script on real working mac, (iMac, MacBoo, MacMini, etc...) generate onr txt contains real MLB and ROM number. Put the Clover configurator RT Variables section, and work... Hello, the only mac available at home is a hold macbook, with 10.7.5 !! i can't run imessagedebug ! i try also IOjones, but same , didn't work on 10.7.5 . any help will be useful . thank Link to comment Share on other sites More sharing options...
Administrators Hervé Posted November 9, 2014 Administrators Share Posted November 9, 2014 How about you go to your nearest FNAC store and grab the info off a real Mac? Link to comment Share on other sites More sharing options...
van_axl Posted November 10, 2014 Share Posted November 10, 2014 I'm not 100% sure if it's your problem but I discovered there are 2 versions 1.3 of the MacIasL compiler floating around. One gave me errors the other no errors just some warnings. I've been using 1.3 built 246 with no problems. So my MacIASL version is 1.3 (252) : this one gives 3 errors I also tried the version 1.3 (246), with same origin DSDT.aml : this gives 15 errors !! No idea. I've attached my DSDT.aml, if someone may try to compile it. DSDT.aml.zip I tried dsdtEditor too , this one gave another 15 errors ... But to move forward, I've used another DSDT.aml from Jake Lo 's pack. Now almost everything is working (HDMI display and audio, SD card reader, sleep, speakers - I 'need to give a try to EAPDFix for audio after sleep). There is one last thing, the headphone output is still giving white noise. I use the AppleHDA from last Jake Lo's pack (link) version 266.5, even if the kextsat give : . but with no luck. Any advise ? Link to comment Share on other sites More sharing options...
robertostudios Posted November 10, 2014 Share Posted November 10, 2014 Hello, the only mac available at home is a hold macbook, with 10.7.5 !! i can't run imessagedebug ! i try also IOjones, but same , didn't work on 10.7.5 . any help will be useful . thank I run ImessageDebug on Yosemite, sorry dont work in 10.7.x Possibly upgrade to Mavericks? Link to comment Share on other sites More sharing options...
robertostudios Posted November 10, 2014 Share Posted November 10, 2014 Can you show me how your E7240 i7-4600U FHD with touch is working? Can you share your kext, dsdt and ssdt files for me? I am unable to make mine (graphics work) What is your device ID for IGP? is it device ID 01a6 revision:000b? Hi! Chipset Model: Intel HD Graphics 4400 Type: GPU Bus: Built-In VRAM (Dynamic, Max): 1024 MB Vendor: Intel (0x8086) Device ID: 0x0a16 Revision ID: 0x000b Displays: Display: Resolution: 1920 x 1080 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes I use Yosemite all stuff work. attach my EFI folder, kexts, and Clover config.plist In ZIP file kext section contains 3 separated kext i install these to /S/L/E with kext wizard. Also i delete from config plist my serial, MLB, ROM, etc, generate your own in Clover Configurator SMBIOS section. Put complete EFI folder from archive to EFI partition on your DELL... Clover EFI folder Here! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 10, 2014 Moderators Share Posted November 10, 2014 So my MacIASL version is 1.3 (252) : this one gives 3 errors I also tried the version 1.3 (246), with same origin DSDT.aml : this gives 15 errors !! No idea. I've attached my DSDT.aml, if someone may try to compile it. DSDT.aml.zip I tried dsdtEditor too , this one gave another 15 errors ... But to move forward, I've used another DSDT.aml from Jake Lo 's pack. Now almost everything is working (HDMI display and audio, SD card reader, sleep, speakers - I 'need to give a try to EAPDFix for audio after sleep). There is one last thing, the headphone output is still giving white noise. I use the AppleHDA from last Jake Lo's pack (link) version 266.5, even if the kextsat give : Capture d’écran 2014-11-10 à 07.06.09.png. but with no luck. Any advise ? If you change the compiler option to ACPI 5.0, you would end up with 2 errors. Anyway, I compiled it for you. DSDT-E7440-van_axl.aml.zip For Audio, make sure to install the patched AppleHDA to S/L/E and remove the dummy AppleHDAALC.kext. Repair and rebuild cache. Link to comment Share on other sites More sharing options...
armino Posted November 11, 2014 Share Posted November 11, 2014 Good morning ladies and gentlemen, i cant get my headphone working. Here's my config: e7440 i5 HD4400 1920x1080, A10 bios (also tried A11). Vanilla 10.9.5 AppleHDA: Speakers are working, headphone is correctly detected when plugged in, but totally silent. Patched AppleHDA plus kernel plus ssdt from here: Speakers are working, headphone is correctly detected when plugged in, but totally silent. booting with -f does not make any difference. Q: I have only applied one dsdt patch from post 1. Do i need to patch more? If so what?? Thanks, Armin Link to comment Share on other sites More sharing options...
ckleea Posted November 11, 2014 Share Posted November 11, 2014 Hi! Chipset Model: Intel HD Graphics 4400 Type: GPU Bus: Built-In VRAM (Dynamic, Max): 1024 MB Vendor: Intel (0x8086) Device ID: 0x0a16 Revision ID: 0x000b Displays: Display: Resolution: 1920 x 1080 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes I use Yosemite all stuff work. attach my EFI folder, kexts, and Clover config.plist In ZIP file kext section contains 3 separated kext i install these to /S/L/E with kext wizard. Also i delete from config plist my serial, MLB, ROM, etc, generate your own in Clover Configurator SMBIOS section. Put complete EFI folder from archive to EFI partition on your DELL... Clover EFI folder Here! Thanks, Interesting. You have an additional AppleIntelFramebufferAzul.Kext Are you following the clover installation in this thread? Link to comment Share on other sites More sharing options...
robertostudios Posted November 11, 2014 Share Posted November 11, 2014 Thanks, Interesting. You have an additional AppleIntelFramebufferAzul.Kext Are you following the clover installation in this thread? I following this thread, and Jake Lo posts, tutors and kexts. Mixed all AppleIntelFramebufferAzul patched for HDMI Audio and HDMI no freeze fix. Do Not Forget! My stuffs is for OSX Yosemite 10.10!!!! No Mavericks Also, my BIOS is A10 - A11 now... Your Bios version same??? Link to comment Share on other sites More sharing options...
cazy Posted November 11, 2014 Share Posted November 11, 2014 Good morning ladies and gentlemen, i cant get my headphone working. Here's my config: e7440 i5 HD4400 1920x1080, A10 bios (also tried A11). Vanilla 10.9.5 AppleHDA: Speakers are working, headphone is correctly detected when plugged in, but totally silent. Patched AppleHDA plus kernel plus ssdt from here: Speakers are working, headphone is correctly detected when plugged in, but totally silent. booting with -f does not make any difference. Q: I have only applied one dsdt patch from post 1. Do i need to patch more? If so what?? Thanks, Armin Try the dsdt.aml from the same page you're linking. It's patched for HDEF and HDMI. Also add EAPDfix.kext in the Clover EFI, like this: And clear caches and rebuild a few times use DPCIManager for that job. Link to comment Share on other sites More sharing options...
Recommended Posts