Jake Lo

Those messages are normal. No issue upgrading

when upgrading Clover, follow these settings. You might have to look in the different folders for the drivers under UEFI Drivers Clover for UEFI booting only Install Clover in the ESP UEFI Drivers AudioDxe DataHubDxe FSInject SMCHelper ApfsDriverLoader AptioMemoryFix Fat FSInject PartitionDxe Ps2MouseDxe UsbMouse.Dxe VBoxHfs Themes (optional) Install Clover Preference Pane (optional)

What update? SSDT.aml is wrong for your system, remove it and create your own. You should update your kexts especially Lilu.kext, Whatevergreen.kext, and AppleALC.kext Once those are updated, you can remove IntelGraphicsFixup. I'm assuming your E5430 has a Broadcom Ethernet, so you can remove AppleIntelE1000e, or vice versa. You have 2 versions of VoodooPS2*. need to remove one or the other. Stick with the one that is for Alps. Lastly update your Clover files. Not sure what version you have installed but it's dated June 2018.

Yes, boot with the installer and follow my suggestion and post the output of the KP. I don't know if your EFI bad or not, you didn't attach it for review. Compress and attach the Clover folder you're using.

Hmm, not sure why I thought it's ALC295 but Dell Dude and MrJonesII both have ALC236/ALC3204 on their Latitude 3400 and layout-id 15 indeed works well. Your ALC3271 is Dell's rename of ALC299 and I don't see layout-id 15 in AppleALC.kext, but only 21 and 22. Can you post the IOReg file to confirm? https://raw.githubusercontent.com/black-dragon74/OSX-Debug/master/IORegistryExplorer.zip

remove ApplePS2SmartTouchPad.kext Not sure what the other 3 voodooPS2* are, should remove them and replace them with VoodooPS2Controller.kext.zip

It's a bug with iasl. I created a patch here to fix that. It'll re-appear every time your open the compiled file.

Boot with verbose + debug 0x100 mode by pressing spacebar at Clover screen Post KP or error.

Ok, give this one a try DSDT-E6320.aml.zip

@Kappuray Are you sure it's not ALC295 / ALC3254?

CLOVER Specifications: Intel 6th generation Core i5-6200U 2.3 GHz, up to 2.8 GHz with Intel Turbo Boost Technology, 3 MB cache, 2 cores Integrated Intel HD Graphics 520 Non touch 35.6 cm (14 in) diagonal LED backlight FHD Slim eDP SVA Anti-glare (1920 x 1080) with camera System can be configured with a hard drive and M.2 SSD drive / NVMe 8192 MB total system memory (8192 MB x 1) Up to 32 GB - DDR4 PC4-17000 (Transfer rates up to 2133 MT/s) Intel Wireless-AC 3165 802.11 a/b/g/n/ac (1 x 1) WiFi and Bluetooth 4.0 combo (non-vPro) HP Module with NXP NFC Controller NPC100 Intel Ethernet Connection I219-V 10/100/1000 Ethernet Synaptics Touchpad Audiio Conexant CX20724 - VendorID: 0x14f150f4 Integrated HD Webcam (1) USB 3.1 Gen 1 charging (1) USB 3.1 Gen 1 (1) USB Basic Type-C (1) DisplayPort (1) VGA (1) RJ-45/Ethernet (1) Docking connector (1) Headphone/microphone combo (1) AC (1) External SIM (1) SD media card reader, supports SD, SDHC, SDXC Working: full graphics acceleration on Intel HD520 iGPU, including brightness control (F5 and F6) multi-display with DisplayPort OOB, VGA audio, microphone input and headset output (F8 and F9) - Mute button not working GigEthernet LAN connection wireless and bluetooth with any compatible card (a DW1560 in my case, no Whitelisting) left and right USB ports including USB Type-C integrated webcam (OOB) CPU power management sleep (Lid, Energy Saver settings, Apple menu, PWR button) & wake (Lid, PWR button) battery management (with SMCBatteryManager v1.0) keyboard and touchpad (with VoodooPS2Controller v1.9.2) keyboard backlight (Fn + F3) touchpad including tap-to-click, scrolling, mouse buttons (can be disable with prt scr key) Partially working: RTS522a microSD card reader (read-only mode) - after sleep, need to eject and reinsert New updated kext allow read and write Not working: TrackStick Finger Print reader Wifi button Mute button (grayed out) Fixed with AppleALC version 1.6.1 by Human7900 BIOS Settings: Installation: Follow the standard UEFI Clover guide Replace contents to /EFI/Clover after installing Clover HP840_G3.zip Updates: Added VoodooSMBUS for better touchpad experience, most gestures work! HP840G3_BetterTouchpad.zip Add HPFanReset.efi to /EFI/Clover/drivers/UEFI HPFanReset.efi.zip Post install: Install CsmVideoDxe.efi to fix stretched Clover boot screen using Clover Configurator. The version from Clover installer does not work. Change BIOS settings for Secure Boot Configuration Configure Legacy Support and Secure Boot = Legacy Support Disable and Secure Boot Disable Note: Files tested on Catalina, Mojave, High Sierra, El Capitan ( Just need to add boot arg -no_compat_check) Credits: Rehabman for hot patched files Sinetek /Cholonam for Sinetek-rtsx (SD Card reader) Leo-laps / 1Revenger1 for VoodooSMBUS & VoodooRMI

I left out the Darwin Patch previously. Try this one DSDT.aml.zip

are you using the new DSDT you had patched?

It just need to be in /EFI/EFI/Clover/ACPI/Patched folder along with all the other SSDT*.aml

Do you have SSDT-ALC256.aml in /E/C/A/Patched?

You need minimum Clover version v5107

All 50 what? There's on a handful of ALC256 patched in AppleALC.kext. Yes, try the latest with layout-id 16.

The touchpad on the M4800 is Alps. Use Dr. Hurts' kext.

Try different layout-id for ALC256, the following are for Dell. Layout-id 16 is the latest from v1.4.7 13, 14, 16, 21, 56

Try caching CodecCommander to /L/E

Post full system specs: Ethernet: Intel, Broadcom, Realtek? Wifi: Intel, Realtel, Broadcom, other? Touchpad: Synaptics, I2C? What version of MacOS to install: Catalina? Mojave? Do you have a Mac to create the installer?

Replace SSDT-PNLF.aml with this one Upgrade the following kexts: Lilu.kext Whatevergreen.kext AppleALC.kext SSDT-PNLF.aml.zip

http://www.coupleintech.com/samsung-970-evo-ssd-macbook-pro/ Samsung 970 EVO is supported, I think there's a 1TB model. But stay away from the 970 EVO Plus. If you go for an M.2 Sata SSD, it'll be the safer route, all supported.

The link I posted above explained it better than I could. I added the patch thinking that might be the case for your NVMe drive brand. As for the No Entry error, it means it's not detecting your USB device. Try using a different USB port and make sure system didn't sleep during the process because USB might not re mount after sleep, hence the error.

No nvidia graphics in IOReg, so it's definitely been disabled. You can also check system information under graphics/displays. Power management is enabled and working. You can try disabling SD Card and Com ports in BIOS and anything not used to preserve energy.