Jake Lo

Post IOReg file using IORegistryExplorer.app v2.1

try setting SecureBootModel from Default to Disabled in the config.plist

That's for your SDCard or you have USB-C device connected

Make sure to use the same version OC files if you switch to debug version

You can switch back to the original files but add verbose mode to the config file under Nvram->boot-args

update all the lilu plugins too 

https://dortania.github.io/builds/?viewall=true

for Ventura, make sure to use at minimum OC 0.8.2 and latest Kexts

https://dortania.github.io/builds/?viewall=true

the 1st Gen Intel graphics is not supported so it's a waste of time hacking it.

But if you still insist, you could check out the E6410 guide, however it's really outdated

try this, replace the config file and add this ssdt*

Archive.zip

run this from terminal, reboot and try

sudo pmset -a hibernatemode 0
sudo rm -f /var/vm/sleepimage
sudo pmset -a hibernatefile /dev/null
sudo pmset -a standby 0
sudo pmset -a powernap 0
sudo pmset -a autopoweroff 0
sudo pmset -a proximitywake 0
sudo pmset -a tcpkeepalive 0

 

what's your expectation with that combo keys?

Correct. IF you want full support. you could try a genuine Apple device with an adapter if it has the space for it.

That's normal

when you hit enable, the Address will show up and State=On

Depends on your hardware

Not much difference for the last 2.2.9 you posted. Very poor response. Both track stick and touchpad are not responding. When using an external USB, the left click does not work. Well, it'll finally work after a few minutes of clicking and tabbing.

alps.log.zip

did you even check the guide section?

https://osxlatitude.com/forums/topic/6472-dell-latitude-e7240e7440-clover-and-opencore/?do=findComment&comment=104316

 

I can confirm with Hervé's finding with v2.2.9 but when I'm using your version 1.0.7, the IOProbeScore is set at 6000 and working fine on my Alps V8. And it's more smooth than this v2.2.9

I remember you had to change the speed here to make it more usable for me on the V8

https://osxlatitude.com/forums/topic/17005-alps-touchpad-driver-with-voodooinput/?do=findComment&comment=113524

Try disabling voodoops2Mouse and voodoops2trackpad

 

do you have windows installed?

to confirm that the device does work? Maybe Ubuntu off from an USB to test?

it's the same as ALC256

Try the following layout-id:

16, 14, 21, 56, 13, and of course you already tried 11.

post the EFI you're using + IOReg file using IORegistryExplorer.app v2.1

try going to trackpad preference and uncheck Force click and silent clicking

No audio or static beep sound?

Can't tell if you have Intel or Broadcom wifi / BT since you have both enabled. My files are only for Broadcom, so you'll have to make some changes.

you also have I2C kexts enabled, this system doesn't have I2C touchpad, so not sure why you have them added unless it has an I2C touchscreen...

 

SSDT-E7470.aml  includes all those SSDT* patches already, so you can remove the rest.

why would you enable SSDT-DisableNVMe.aml? I assume your hdd is SATA SSD? then you don't need NVMeFix.kext

why would you have both RealtekCardReader.kext and Sinetek-rtsx.kext enabled? they both does the same thing although RealtekCardReader.kext might be faster

 

try my OC 0.7.9 files

https://osxlatitude.com/forums/topic/9179-dell-latitude-e7x70-clover-and-opencore/?do=findComment&comment=104256

did you reset NVRam after the changes?

post current config file

Just review you config again and notice you have a kext patch. You should disable it and keep only the compatible patch or the SSDT you had created.

Micro Inc. SD Card Reader - pci14e4,16bc -> pci1217,8621