Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    868

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Add SSDT-PNLF.aml from the Clover folder you attached on the 1st post
  2. Jake Lo
    Here you go A21_DSDT.aml.zip
  3. Jake Lo
    @ggrpitt Latest version is 2.2.10. Have you repaired permission and rebuilt cache?
  4. Jake Lo
    I would recommend either E7450 or E7470. I have full guide and bootpacks for them. On E7450, SD Card reader is supported, E7470 does not. On both model, the touchpad is not fully supported as you won't have gestures, but you'll have 2 fingers scrolling, right click, tab to drag. Works perfectly well enough for me. For the track stick middle button for scrolling to work, just install SmartScroll.app. Latitude 7480 comes in both Skylake and Kabylake processors, the I2C touchpad on this model is semi supported with basic mouse movements. Still no gestures. All these requires an M.2 wireless card, I recommend DW1560 or DW1830.
  5. Jake Lo
    @caiorehenrique Give this a try, files go into /EFI/Clover after you had created the installer and installed Clover Vostro3360.zip
  6. Jake Lo
    Did you set Bios to UEFI enable/ AHCI enable/ Legacy Option ROMs disabled Your installed drive, is it formatted to GUID / Journal Extended?
  7. Jake Lo
    What's the resolution? Audio, you'll need more details as to what codec ID.
  8. Jake Lo
    You have either remove all the app from the dock or there's major issue with the installation. Shouldn't be only 5 items on the dock on 1st boot. Your installer doesn't need to be formatted to APFS, HFS+ is fine.
  9. Jake Lo
    Did you format the whole drive to GUID / Journal Extended? Before creating 2 partitions? I see you have second partition for W10.
  10. Jake Lo
    At Clover gui, press O to get to Options. Go down to Graphics Injector and select it Select FakeID and platform-id and change it to 0x12345678 Go back to main menu and start the installer
  11. Jake Lo
    Western Digital NVMe drive
  12. Jake Lo
    Set BIOS to AHCI. Raid is not supported without additional kext. The error is due to NVMe driver. Try the WD. I had WD and it's working nicely.
  13. Jake Lo
    Try this one Where did you get the patched DSDT.aml? config.plist.zip
  14. Jake Lo

    Dell e7470

    Jake Lo replied to Akv's topic in The Archive

    Use Xcode
  15. Jake Lo
    Ok, post debug file without the connection What type of ports does it have? HDMI, DP, VGA?
  16. Jake Lo
    DW1540 is not supported and DW1510 is minPCIe, you'll need an M.2 card for this model You can consult our Wireless thread here
  17. Jake Lo
    Post IOReg with HDMI connected
  18. Jake Lo
    I too have the same result, guess we'll just have to wait for further development
  19. Jake Lo

    Dell e7470

    Jake Lo replied to Akv's topic in The Archive

    try this version, you'll need to build it yourself. "GridH fork: made some changes to solve a sleeping-related issue." https://github.com/Grid-H/OS-X-BrcmPatchRAM
  20. Jake Lo
    Headkaze has a modified version here https://github.com/headkaze/OS-X-BrcmPatchRAM/releases Detailed info here https://www.insanelymac.com/forum/topic/339175-brcmpatchram2-for-1015-catalina-broadcom-bluetooth-firmware-upload/
  21. Jake Lo
    try add this to boot arg bpr_probedelay=100 bpr_initialdelay=300 bpr_postresetdelay=300
  22. Jake Lo
    Yup DW1560!
  23. Jake Lo
    You can try replace ApplePS2Controller with this one, but you might encounter different issue as it's not fully supported. You will not find any newer kext for Alps touchpad which is what it's on this system, than this one. So if this doesn't work, you're out of luck. For me ApplePS2Controller work really stable, no jitter, very smooth scrolling with 2 fingers, tab to drag, 2 fingers right click, basic mouse movement. You can speed it up scrolling by speeding it up in Mouse Preference. You can also use the track stick (nub) for scrolling by installing smart scroll.app (not free).
  24. Jake Lo

    Dell e7470

    Jake Lo replied to Akv's topic in The Archive

    try adding to boot arg bpr_probedelay=100 bpr_initialdelay=300 bpr_postresetdelay=300 or slightly longer delays, you can test the different timing bpr_probedelay=200 bpr_initialdelay=400 bpr_postresetdelay=400
  25. Jake Lo
    Move or copy kexts in /EFI/Clover/kexts/Other/CopyToLE to /Library/Extensions Repair permissions and rebuild cache Follow post install here
×
×
  • Create New...