Jake Lo

what version of BIOS are you on? Perhaps patching the files from the latest BIOS you're running would help. Upgrade to latest BIOS, no need to set the DVMT with EFI_Shell, there's new kexts that will fix that. I'll make a new boot pack for it. Reset BIOS to default, then set UEFI, AHCI, disable TPM and secure Boot. Extract the raw files with F4 while booting into Clover. Compress and attach /EFI/Clover/ACPI/Origin here for patching

I don't see pci14e4,1681 in the plist of FakePCIID_BCM57XX_as_BCM57765, perhaps adding it might work. Here, I added the key, give it another try. FakePCIID_BCM57XX_as_BCM57765.kext.zip

You can't just drag the file with the left mouse, drag it to location and release the left mouse?

Add FakePCIID_BCM57XX_as_BCM57765.kext to /kexts/Other, remove BCM5722D.kext. Reboot to see if it helps

DW1550 should work for this system

Either google for it or get it from here

Did you keep the other folders, other than replacing those 3 file and folders attached? Make sure you have HFSPlus.efi in /EFI/Clover/driver64UEFI

Yes, the USB_Injector plus the SMBIOS set to MBP7,1 or MBP5,1 made all the difference. Do you have old SATA HDD or SSD?

Sounds like it's not a success install, format the partition and reinstall

You need to compress before you could attach

Replace this into /EFI/Clover, not merge. Then update according this post.

Try this, replace files and folders into /EFI/Clover Package made from Hervé's files D630_NVS.zip

Check /System/Library/Extensions for AppleHDA.kext, it should be untouched. AppleHDAIDT.kext should go into /Library/Extensions You shouldn't have ApplePS2Trackpad.kext in /Library/Extensions if you're using the files attached.

Post the result after you ran the rebuild cache here for review. AppleHDA? You should have the vanilla AppleHDA in /S/L/E, but not in /L/E

I'm assuming you're following the Clover guide, read the post install. Place kexts from /EFI/Clover/kexts/Other/LE into /Library/Extensions Then run the permission fix and rebuild cache. You might have to reboot a couple of times If it still fails, then copy this into /Library/Extension and repair permission and rebuild cache again. Make sure successful build and no error Also link to the post you'e getting the boot files from for review

USB issue. Chameleon and Clover files differ. Attach your Clover folder for review. Mainly, you need the USB_injector in /EFI/Clover/kexts/Other, SMBIOS must be set to MBP7,1 See here for Config file

Try removing SSDT-2.aml and SSDT-3.aml and in the Config file-> DropTables , add SSDT ->CpuSsdt SSDT->Cpu0Ist

Don't think you're booting from the same EFI folder you attached on post #7. The Config file points to theme Latitude. The wallpaper above definitely is something else. So the 3rd selection is Macintosh Sierra, what is the first selection on the left? The 2nd and 4th are Recovery HD

Open config file with Clover Configurator, under System Parameter, put 0 in Backlight Level If still not working, try 0x0306 Also make sure to run permission fix and rebuild cache

Stick with the Clover loader, update files according to this post Post KP by booting with following option verbose (-v) Don't reboot on panic (debug=0x100)

hit F10 at the Clover GUI. It saves a screenshot to /EFI/Clover/misc post the image here In your Clover install log, I could see both Macintosh Sierra & Macintosh HD, I assume Macintosh HD is the El Capitan install? So Sierra is showing but not El Capitan?

Sorry, you are dual booting El Capitan with what? You didn't specify on the post, I was just assuming Windows.

First of all, please create a new thread for High Sierra. Second, post the KP while booting with verbose mode

Check EFI partition, do you see a Microsoft folder?

I'm using a different audio kext now using layout-id = 11 (AppleALC.kext + Lilu.kext).