Jump to content
New membership by application only, through the "Contact Us" facility

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    871

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Try this, replace config.plist and place DSDT/SSDT in /EFI/Clover/ACPI/Patched M6700.zip
  2. Jake Lo
    USB issue. Attach your Clover folder for review.
  3. Jake Lo
    Replace with this config file config.plist.zip
  4. Jake Lo
    File looks ok, but you're not using the latest version from the link, should be 21.5, yours is showing 15.7beta What error are you getting, boot with verbose mode.
  5. Jake Lo
    Attach your Clover folder for review Also attach IOReg IORegistryExplorer_v2.1.zip And screenshots of Status and PCI List with DPCIManager https://sourceforge.net/projects/dpcimanager/ Are you using an existing bootpack?
  6. Jake Lo
    @seeker_pl, with those specs, it looks like the E7470 you're replacing. should be an easy hack, just use the same guide
  7. Jake Lo
    disable fixRegion if you have it enabled
  8. Jake Lo
    you must have an older voodoops2controller in your USB installer. You can find a newer file in my Sierra bootpack.
  9. Jake Lo
    If you have read the guide, you would've seen this part. 8. Repair permission and rebuild cache. Run command from terminal sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /
  10. Jake Lo
    try booting with arg cpus=1
  11. Jake Lo
    My generic EFI here v4173
  12. Jake Lo
    Might have to be updated too, you can test it first
  13. Jake Lo
    Yes, boot with USB installer and then select the local drive. Once logged in, you could upgrade
  14. Jake Lo
    upgrade to latest clover v4173
  15. Jake Lo
    Yes VM or this http://www.insanelymac.com/forum/topic/288795-guide-creating-os-x-usb-installer-using-a-windows-pc-only/?do=findComment&comment=2012539 if you don't have a Mac to work with
  16. Jake Lo
    Not knowing what wireless card, ethernet, exact audio device it has, we could start with this until you install MacOS. Follow my Clover guide here to create the installer, use the bootpack attached. Don't forget to include the generic EFI from post #2 R510VX.zip
  17. Jake Lo
    1) Upgrade to latest Clover 2) if you have Voodoops2Controller, make sure to upgrade to latest version 3) Upgrade other kexts as well if there's newer version Now you're ready for upgrade. Latest should be 10.12.6
  18. Jake Lo
    QCA9377 is not supported. Try DW1560 or DW1830, both are M.2 wifi/bluetooth combo card.
  19. Jake Lo
    Right click next to the Update tab and select Hide Update
  20. Jake Lo
    You could just hide it from installation. Yes, SD Card reader works for most Latitude ranging from SandyBridge to Broadwell that comes with the O2 Micro card. Starting with Skylake, Dell replaced them with Realtek that's not supported.
  21. Jake Lo
    Does bluetooth shows up under USB of system information? If not, then it could be the USBInjectAll + SSDT-USB.aml are not working. If that's the case, enable USB port limit in the Config file, remove the SSDT-USB.aml in EFI Reboot and check again. By the way, what bluetooth device do you have?
  22. Jake Lo
    Try new bootpack Firmware updates are for real Macs. Either generate new smbios with latest Clover Configurator or use one from the new bootpack, has new SMBIOS. Shouldn't take an hour to finish unless your USB installer has slow read or you drive is mechanical and not SSD. HFSPlus.efi is included in the generic EFI attachment. You probably miss this big note in post #2 for the bootpacks Note: Bootpack (EFI) consists of combining the Generic EFI + the model you're downloading!!! New bootpack has additional SSDT-USB by anhgiang, so might fix the bluetooth issue. When rebuilding cache, errors might occur. Rerun the touch and kextcache commands again until errors are gone. Error 107 shouldn't occur if you're installing 10.12.4 and above.
  23. Jake Lo
    Let's try to improve. Do you have this issue with the original Config.plist?
  24. Jake Lo
    You could try http://www.insanelymac.com/forum/files/file/496-applehda-patcher/
  25. Jake Lo
    Try putting system to sleep with headphone jack connected and then wake it up.
×
×
  • Create New...