Jake Lo

was audio working prior to replacing with the new patched DSDT/SSDT? Repair permission and rebuild cache to see if this helps. What version of BIOS are you currently on or version of BIOS the DSDT/SSDT extracted from?

Hmm, these file are not patched, just raw files. Here, patched now. See if this still work with you wireless Felix_E7470.zip

Still showing rootless=0 which is not from my attached Config file.

Keep SSDT and Config file, but replace with this DSDT DSDT.aml.zip

Still no boot with the files?

I don't have rootless=0 on my Config.plist. Are you sure?

You need to replace the card with a DW1560 or DW1830 I have not fiddle with 7510 for awhile now, so no new improvement on my part.

Not sure what you mean by exporting DSDT/SSDT. Did you repatch your files?

That's correct. I suggest replacing them first before upgrading, otherwise you'll encounter KP.

If you are to upgrade to anything over 10.11.3, make sure to upgrade the AppleHDA_ALC292 and VoodooPS2Controller linked in the Updated section of my guide

Yes, remove those 2 kexts I mentioned above in /S/L/E and run those commands again to repair permission rand rebuild cache. Make sure you also don't have NullCPUPowermanagement.kext in Clover kext or anywhere in the system. You can't bypass the Clover loader GUI, it's what makes your system boot OS X, but you can make it boot directly to OS X. In Clover Config.plist file, under Boot, enter the Default Boot Volume the OS X hardware name you use exactly with case sensitive. Change the time out to 1 or 0, whatever you prefer, save and reboot.

You could just mount the EFI partition from OSX. Delete the Boot and Clover folder and then reboot. It should boot to Windows. You can the delete the OS X partition from Windows disk manager.

run it again until you no longer get exited status 77, error 17 is fine. You can't control audio because VoodooHDA need a little customization. With my files you have patched AppleHDA instead. From the output, you need to remove VoodooHDA and AppleHDADisabler as I mentioned above. You didn't add the kexts in /Kexts/Other/LE as I mentioned above either. Not sure what's the NullEthernet is for...you don't have an internal ethernet device?

Replace your files in EFI with this but keep the above DSDT and Config file. Remove VoodooHDA and AppleHDADisabler. Install kexts in /Kexts/Other/LE to /Library/Extensions and then run following commands sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / What version os Sierra are you running? Volume and brightness control should be fix with 10.12.3 See my guide here for more info

Try this Open your Config.plist with Clover Configurator v 4.40 Navigate to the System Parameters on the left Under Backlight Level, enter 00020000 Save and reboot.

Try replacing with these files R14x.zip

You need to remove NullCPUPowermanagement.kext

Looking at your iOReg, you already have everything patched. What issue are you having?

Get it from Apple Store, it's free. You need to download from a system that's running OS X though. https://itunes.apple.com/us/app/macos-sierra/id1127487414?mt=12

See guide here, bootpack on post #2. It's based off of Bios version A14, so for best results, use the same version. Make sure to read thoroughly including the Notes...

That can be done from Clover Option during boot too.

Try this Open your Config.plist with Clover Configurator v 4.40 Navigate to the System Parameters on the left Under Backlight Level, enter 00020000 Save and reboot.

Ok, looks like it's an USB issue. Try applying the USB3_PRW 0x0D or 0x06 (instant wake) patch from Rehabman's GitHub. You need to determine which 0x0D or 0x06 patch.

that or use the Clover patch fstolenMemorysize. personally, i prefer the BIOS DVMT set

Did you do something with the BIOS? You need to set the DVMT again