Jake Lo

Did you enter the Default Boot Volume in the config file with the OS X Harddisk name you used (case sensitive and space if any)?

Boot with verbose mode and select do not reboot on error ( can't remember the exact words). Post the error here

Make sure it's enabled in the Bios. To attach, use the 'More Reply Options'

Launch Config.plist with Clover Configurator 4.40. Select ACPI on the left. On the right, under DSDT patches, there's a drop down on the middle. Select them, they'll be added.

Try this. Set BIOS to default, apply, then set the correct settings again, UEFI, AHCI, disable Legacy Rom Option. This will reset the DVMT, so boot with the EFI shell and set the DVMT again. Boot OSX to confirm if all fixed.

I think that's why I enabled Legacy Option ROMs when I was installing Sierra and encountered bad artifacts. What version of bios are you on?

Does the disabling enable your ethernet? Try re-enabling to see if Ethernet still work. Mine works fine with it enabled.

Have you set the DVMT to the correct value using the EFI shell from my guide? I don't remember experiencing this issue on my E7470/E7270.

Did you set the DVMT with EFI shell or use Clover patch?

Intel Ethernet is supported but not the Wireless. You'll need to replace it with a supported card suggested in my E7x70 guide, DW1560. The ethernet is supported with the IntelMausiEthernet kext from my bootpack. Some found that disabling Legacy Rom Option in the BIOS will enable the Ethernet. Mine works either way. Give that a try. Make sure that IntelMausiEthernet is in /clover/kexts/other or in /LE/ Or /S/L/E to work.

Disable or enable Legacy Rom Option in the BIOS.

Try the boot files from this guide.

Try Mirone's HDA Patcher. I see 2 versions, try both to see which works best.

Try adding USBInjectall.kext and change EHC1 and EHC2 to EH01 and EH02 respectively either through DSDT or with Clover Config.plist

@j1madr, sounds like it's an USB issue for you if Bluetooth is not showing up under Bluetooth and under USB in system information

My E7440 also has HD4400 and fakeID 0x04128086 works perfectly. Tried your version of Clover 4012 and latest 4035, both without issue. If I reverse the fakeID as Hervé stated, I'll lost graphics acceleration with 7 MB. So I guess the developer of Clover Configurator has the value reversed. MBA 6.2 is fine for Haswell system, it's also what I use. Try launching DPCIManager and post the status and the PCI List here. https://sourceforge.net/projects/dpcimanager/

0x04128086 is correct, it's what I had on my Haswell system, unless the latest Clover has reverse it. I'll try your version of Clover and see if it breaks graphics.

You are mixing Clover and Chameleon files it seems. VoodooSDHC, AppleIntelFramebufferCapri, AppleACPIPlatform, AppleHDA are not needed. Also not from my Sierra 6430u bootpack, not sure where you get those files from. As for the command output error 77, rerun the commands again until it's gone and only shows error 17.

Not sure what other files you have installed, the above log showed you have NullCPUPowerManagement and AppleIntelE1000e which are not from my bootpack. ​You might have some conflicting files. Check /Library/Extensions and /System/Library/Extensions for any rogue PS2 kexts and remove it. Also get rid of NullCPUPowerManagement.

I'm not sure what Welcome message you're referring to, can you get a screenshot? Is it causing real KP?

replace the voodoops2controller in /clover/kexts/other with this one R6B6 #483

As Bronxteck suggested, you need to set the DVMT otherwise you'll get a KP/reboot if you have the Broadwell model with 5th Generation I series CPU (HD 5500). If you have Haswell with 4th Gen i series CPU (HD 4400), you'll also get KP if you don't have KernelPM enable in Clover Config

No, kext on in /L/E or /S/L/E or Clover/Kexts/Other folder and cache won't load unless you manually load it after logon. I have DrHurt's version R6B6 and Caps Lock works correctly. Single tap to Lock and single tap to unlock caps.

Make sure you don't have another PS2 controller anywhere in your system. Check Clover/Kexts/Other or 10.12 or /L/E or /S/L/E Look for ApplePS2Controller as well as VoodooPS2Controller or any other.

Sorry, just set it 1 or 0