Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    868

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Follow this thread. For unknown reason, it won't boot with AFPS and HFSPlus.efi drivers in /EFI/Clover/drivers/UEFI. They need to be in the root or another location where you can load it from shell after booting to Clover.
  2. Jake Lo
    IOReg file not found. Try this config, enable SD Card reader too config.plist.zip
  3. Jake Lo
    Please post full system's specs
  4. Jake Lo
    Try files from here for the touchpad function https://osxlatitude.com/forums/topic/14557-solved-latitude-3400-unable-to-install-big-sur/?do=findComment&comment=105602
  5. Jake Lo
    I didn't say to cache AppleALC in /L/E but since you did, you need Lilu.kext as well. AppleALC is dependent of Lilu.
  6. Jake Lo
    Replace it with Dr Hurts
  7. Jake Lo
    Your touchpad is an Alps. You could try 1Revenger1's VoodooPS2Controller, see if that helps. For me, I just use BAndysc's version on my E7470. It doesn't give me gestures but 2 fingers scroll works. Tracksticks works as a mouse, so I just use Smartscroll enable the middle button for scrolling as well. If that doesn't work either, you could try ApplePS2Controller.kext from in my Clover E7470 guide, works the same as BAnydysc's kext except without the CapLock Fix.
  8. Jake Lo
    Try this guys Download this EFI, copy the attached files and place them inside /EFI/Clover This will be your EFI bootpack. Set your BIOS to UEFI enable / AHCI enable / Secure Boot disable See here if you need help to create installer. You'll need a Mac or Hackintosh Latitude_5580.zip
  9. Jake Lo
    Try this, replace EFI folder from here and add attached files to /EFI/Clover 3340_Catalina.zip
  10. Jake Lo
    Restore to the working one
  11. Jake Lo
    Try sleep and then wake the computer. Maybe try adding this to boot arg igfxonln=1 //notice no hyphen infront
  12. Jake Lo
    You might just have to set the DVMT pre-allocation to 64mb or higher I'm not familiar with PixelBook so not sure if you have access to set that.
  13. Jake Lo
    try this. If not work, you could try my files here config.plist.zip
  14. Jake Lo
    post Config file
  15. Jake Lo
    @olm3ca Give this config a try config.plist.zip
  16. Jake Lo
    @olm3ca If you're able to boot to the desktop Download this, launch, save, compress and attach it here
  17. Jake Lo
    Disable all that include BRCM* in it. According the compatibility list, 7265 is supported. See here To disable SIP, you need to boot to recovery mode, disable SIP, boot to normal mode. Do the installation, reboot to recovery mode to re-enable SIP.
  18. Jake Lo
    Seems to be a Broadcom wifi driver error. What wifi device does your system have?
  19. Jake Lo
    Change it under NVRAM bootarg with alcid=14
  20. Jake Lo
    Switch to layoutid=15
  21. Jake Lo
    try replacing VoodooPS2Controller with Rehabman's version
  22. Jake Lo
    try disabling serial port in the BIOS
  23. Jake Lo
    I thought it's obvious with SSDT-ALC256.aml So your codec is ALC256 aka ALC3246
  24. Jake Lo
    I don't see how you have BT working with the files you had attached. From the previous IOReg file, it looks like you have Intel Wifi which means you have Intel BT. You'll need IntelBluetoothFirmware and Intelbluetoothinjector.
  25. Jake Lo
    I think you meant SSDT-BRT6 Anyway it's missing the 2 patches under ACPI Here, replace the Config and SSDT Archive.zip
×
×
  • Create New...