Hervé

nVidia 135m or 140m? Make sure you're running on BIOS A17 or A18 and that your settings are as per listed in dedicated thread. If you follow the process as documented in EDP section, you'll be Ok. At install, boot with option 'USBBusFix=No', it usually fixes the lack of keyboard/trackpad issue, otherwise you'll need USB Keyboard + Mouse. When you run EDP, don't use the pre-defined values but install the following kexts instead: - ANV-Slice modified VoodooPS2 controller - NullCPUPowerManagement - SleepEnabler - Emulated SpeedStep - VoodooTSCsync - patched AppleHDA for D630 - VoodooBattery The run the Hibernation fix and install Chameleon. Install Chameleon Wizard too and edit your Boot plist in /Extra to tick-off USBBusFix option if it is selected. I can guarantee this works on a D630 nVidia 135m. You have a OS X-compatible Wireless card, right?

If you have a copy of retail Snow Leopard, you can always do a basic installation with Nawcom BootCD. This will give you a sufficient base from which to create your myHack USB installer.

Credits & thanks to BronxTeck and those folks who initially documented the now-obsolete ATI Radeon X1300 fix (Azimutz, Brent Anderson, etc.). Research done on Vostro 200 SlimTower model, as pictured below. Target OS X releases: Snow Leopard 10.6.8 -> done Lion 10.7.5 -> done Mountain Lion 10.8.2 -> done I successfully installed SL 10.6.8 / Lion 10.7.5 / ML 10.8.2 with myHack 3.1.2 on that system and it's 99% fully functional. The specs: Foxconn G33M02 motherboard modded/unlocked Award BIOS 1.0.16, supporting HDD AHCI mode selection (see www.bios-mods.com). It also works with standard BIOS with HDD set on RAID mode. Intel G33 chipset Integrated Intel GMA 3100 graphics (totally unsupported in Mac OS X, a supported PCIe card must be used) Intel C2D E8600 3.33GHz FSB-1333MHz CPU 4Go DDR2-800 RAM Intel 82562V-2 10/100Mb built-in Ethernet Realtek ALC888 audio (7.1) ATI Radeon Pro X1300/X1550 (RV516 chip) 256MB graphics card (low-profile, fanless, 1 DVI dual-link + 1 S-Video). PCI dev id=0x7183. TEAC CA200 internal-USB 19-in-1 card reader Dell-branded Logitech wireless keyboard + mouse (bluetooth with USB BT dongle as pictured above) Status at 06Jan is as follows: Working: ATI Radeon X1300 card is unsupported by standard Chameleon 2.1 branch, however GraphicsEnabler branch from Azimutz supports 'legacy' ATI injection ('ATiGraphicsEnabler.Dylib' in /Extra/modules + various 'boot' files to choose from (depending on HDD partitions arrangements) - many thanks Azimutz!). Latest release (v2.1 r1515 at time of writing) does support ATI X1300 with dev id 0x7183. full QE/CI with ATI X1300 achieved under SL (with EVOenabler kext for ATI X1000 series (patched plist to reflect exact card model) + ATI X1000 series kexts (patched with dev id). All resolutions from 640*480 to 1680*1050 are available and working on my 20" widescreen LCD. It's work-in-progress under Lion. 64bit kernel mode under SL supported thanks to Chameleon ATI injection wireless (bluetooth) keyboard + mouse work OOB. The multimedia buttons even work too! audio (with VoodooHDA kext) built-in Ethernet (with AppleIntelE1000 or Intel82566MM kext, provided it holds dev id 0x10c08086 in the plist, otherwise, patch kext) TEAC card-reader works OOB. Tested with SD + xD + Sony ProDuo + SmartMedia cards SpeedStep @2.0/2.33/2.67/3.0/3.33GHz (with EDP emulated-SpeedStep) display sleep/wake (sleeps Ok through active corner or energy savings setup) system sleep/wake (wake to be confirmed, because I have doubts), with apparent wake from keyboard and/or mouse click/move fully supported Not working: display does not appear to wake from computer sleep; screen stays off Obviously, this PC will need a different and supported graphics card for ML, the current one being limited to full resolution (here 1680x1050x32) w/o acceleration in the absence of 64bit ATI X1000 kexts... Low-profile passive/fanless nVidia GeForce GT610 (or GT620?) appears suitable candidate. NB: all initial OS X installations done with myHack + generic Extra folder and no DSDT table. DSDT patching was required afterwards for system tuning (shutdown/restart, HDD icons, etc.). regular Vostro 200 MiniTower should work just the same or better: it has same motherboard and, taking full size expansion/add-on boards, can support a much wider choice of graphics cards. - - - - - - - - - - Edit #1: 8 Jan 2013 . following DSDT table extraction and patching with BronxTeck's assistance, system now shuts down properly. . got computer to sleep & (apparently) wake by taking out NullCPUPowerManagement + SleepEnabler kexts that I had installed by default - - - - - - - - - - Edit #2: 9 Jan 2013 . after tuning of ATI Radeon X1300 graphics kext, display sleep was confirmed operational. Can be activated through active corner. Display wakes without issue on mouse move/click or keystroke. - - - - - - - - - - Edit #3: 11 Jan 2013 . validated update to SL 10.6.8 from 10.6.3. All Ok with usual ACPI kext replacement. . tuned-up ATI Radeon X1300 graphics under SL -> full QE/CI now 100% operational. Details here: https://osxlatitude.com/index.php?/topic/1579-lion-1074-on-dell-optiplex-755-with-radeon-x1300-128-mb/page-2? (please note that dual-display setup was not tested and probably requires EDID tuning in EVOEnabler kext). . 64bit kernel supported and tested under SL, all thanks to Chameleon ATI injection. . full QE/CI under Lion is on-going. At present, only resolutions is supported (through standard ATI framebuffer). . DSDT table fine-tuning on-going, I'm hoping to find a fix for Wake issue soon. . Model added to EDP (without any specific graphics support for Lion and ML). - - - - - - - - - - Edit #4: 20 Jan 2013 . validated update to ML 10.8.2 from 10.8. All Ok, straight update. . audio Ok (with VoodoHDA 10.8.1), SpeedStep Ok, card reader Ok, only graphics were limited as expected due to unsupported card. . full QE/CI under Lion is now being investigated with RadeonHD alternative. More to follow on this in due course. . no progress to date on DSDT final tuning. - - - - - - - - - - Edit #5: 17 Feb 2013 . further to introduction of EDP5.0 and release of Chameleon r2181, ATI Radeon X1300 card appears supported with just the patched kexts under SL10.6.8; no need of Azimutz's branch boot file + ATI module any more. No impact to 64bit kernel mode operation.

My apologies, I guess I misunderstood you and was thinking Trackpad. I don't believe the TrackPoint is supported on the D Series.

Haaaaa, indeed if "Install Chameleon" was run, that would have screwed the partition...

Sandra, did you just run the "Install Extra" on your MBP's HDD or was it the "Create 10.x installer"? Mick, it doesn't sound like a GUID/partition issue, does it? It seems to me more like the system files are screwed up.

If that card is supported in OS X (and it looks like it would be/is), why not, but it's a half-size mini-PCIe card, so bracket will be required in a D Series laptop. I'm reading reports of successful OS X operation with Atheros AR5B195 AR3011 combo Wifi+Bluetooth cards, although some say that BT is non-functional after sleep (something experienced on our D Series with DW1395 + DW360 under SL only).

Fat32 should get you up to 32GB or thereabout; I've used a 32GB USB key formatted fat32 before and I think it was RW-able from MacOS (but can't remember). Regarding BT modules, look here: https://osxlatitude.com/index.php?/topic/1824-bluetooth-adapters/ All my D6x0 run a BT module (4 fitted with DW360, 1 with DW350).

Hi and Welcome, Don't worry, seat back and relax, help is on the way! Be patient, it's coming from Holland...

Same HDD NTFS-formatted partitions are Read-Only by default in OS X, unless there's a fancy tool to allow it. From Windows, MacOS-formatted partitions are unreadable by default, but MacDrive tool (not free) allows full access to them. No idea from a Linux partition. Maybe a FAT partition could be RW from all OSes but I don't know. I'd keep them self-contained if I were you, best way to avoid issues.

Good for you, but here we support retail version installation through myHack installer, not distros. That allows us to build a comprehensive dedicated set of kexts and support users in a controlled way with a sound underlying common base.

If it gets corrupted, just make a new one, it's simple enough. Otherwise, you're welcome to try and make an image and burn it to a DVD.

Which kext did you install for Keyboard/TrackPad?

I've had that before, but can't remember what got me to that stage. Strange key combinations or messing up with EDP? Can't say. I think I ended up with a re-install...

Well, as Bob said, the D630 is a sure thing as far as installing SL or Lion is concerned. If you feel more adventurous, try the E6400. Or get both! re: D620, bear in mind that many parts are interchangeable with the D630: LCD, keyboard (well not that burnt one!), HDD, DVD/CD drive, Bluetooth adapter, wifi card, etc. If you managed to get 4Go into the D630, that is an excellent thing. You mention "Intel 965", that is the chipset, the integrated graphics card is GMA X3100 (also referred to as Crestline). Lookup in the BIOS for LCD resolution; there are 2 models: LoRes WXGA (1280x800) and HiRes WXGA+ (1440x900). You'll need to use the appropriate bootpack/DSDT according to that not-so-subtle difference. Of course, go for the HiRes LCD if there is one (check the D620 as well). Before you start anything, I'd advise you to update your BIOS to version A17 or A18 (the latter only differs from the former by having support for signed firmware) and set things as per recommended in dedicated BIOS thread. Re: multi-boot, I'd advise to start with OS X, then Win7 (or XP), then Ubuntu (or whatever flavour of Linux you fancy). Check the wireless card in each D6x0. Pick-up a non-Intel card if there is one available. These laptops were typically fitted with an Intel 3945 card and that is not compatible with OS X. For Bluetooth, a DW360 is better than a DW350.

Mmm, which mouse/PS2 controller are you using?

Well, clearly the choice is between the E6400 and the D630, the former being a slightly more powerful machine of course. Leave the D620 aside, especially with Intel GMA950, since it's a slower system (FSB667 CPUs, DDR2-667), although Snow Leopard runs brilliantly on it. Like all D620, the D630 with Intel X3100 will be limited to Lion (ML dropped support for older Intel GMA) and will of course run Win7 and Ubuntu very well. These are nice little laptops, especially with 4Go DDR2-800 RAM, a >2.0GHz C2D CPU and high res/WSXGA+ LCD. This has been one of my earliest dual-boot Win7/Lion Hackintosh, which I still use, though less frequently now that an nVidia model has become my daily home device. Re: E6400, make sure the graphics card is supported under OS X and it should be a pretty good machine to run all 3 OS on. Read-up the E6xxx section for info.

Oh, if you don't want the auto-boot, it's easy. Look at the Cham Wizard boot plist picture I attached above. At top left corner, you'll see the boot options and the TimeOut bar. Move that to the left and you'll have 2 further options: Instant Menu and QuietBoot. Opt for Instant Menu and the bootloader will stop at HDD partitions menu.

Well, if your screen is configured and runs at 1440x900, you're Ok then, I don't see where the problem is... Leave your boot plist parameters as they are. ??? What are your talking about? Download Ukelele and copy Logitech UK layout files in "/Library/Keyboard Layouts". See my post of yesterday on the exact same matter.

Re-run EDP kext installation and opt for your own settings. You can then choose the patched HDA controller for D630.

Any particular reason why you want Modbin kernel as opposed to legacy kernel?

With an AMD-based system, use Nawcom's BootCD to boot and install Snow Leopard. You need a legacy kernel for AMD CPUs, otherwise systematic KP as experienced. Look at the OSXL site for details, it's dead easy.

I found that option "USBBusFix=No" is typically required to avoid Keyboard issue when installing Lion. It's not off by default as far as I'm concerned: check your boot plist file...

You could simply uncheck the 1280x800x32 case (like my D620 nVidia plist). However, check the resolution you have selected in Monitor settings. If you've swapped LCD, go and check that (System Preferences -> Monitors or Monitor icon on menu bar) and adjust if necessary. I'm assuming that you have of course replaced your DSDT table from the LoRes version (1280x800) to the HiRes version (1440x900). That is a necessary step for all Intel GMA D620/D630...

Check your BIOS settings as per recommended in the dedicated thread. Provided you're using the correct bootpack (remember to pick up the pack with correct resolution), you should have no problem booting myHack Lion installer and proceeding with installation. I would recommend that you boot with option "USBBusFix=No" to avoid keyboard issue.