Jump to content

ELAN and FocalTech (Smart Touchpad) driver Issues


EMlyDinEsH

Recommended Posts

Sorry, same error.

 

Can't load kext com.apple.ApplePS2Controller - link failed.
Failed to load executable for kext com.apple.ApplePS2Controller.
Kext com.apple.ApplePS2Controller failed to load (0xdc008016).
Failed to load kext com.apple.ApplePS2Controller (error 0xdc008016).
kxld[com.apple.ApplePS2ElanTouchpad]: The Mach-O file is malformed: Invalid segment type in MH_KEXT_BUNDLE kext: 42.
Can't load kext com.apple.ApplePS2ElanTouchpad - link failed.
Failed to load executable for kext com.apple.ApplePS2ElanTouchpad.
Kext com.apple.ApplePS2ElanTouchpad failed to load (0xdc008016).
Failed to load kext com.apple.ApplePS2ElanTouchpad (error 0xdc008016).
kxld[com.apple.ApplePS2Controller]: The Mach-O file is malformed: Invalid segment type in MH_KEXT_BUNDLE kext: 42.
Can't load kext com.apple.ApplePS2Controller - link failed.
Failed to load executable for kext com.apple.ApplePS2Controller.
Kext com.apple.ApplePS2Controller failed to load (0xdc008016).
Failed to load kext com.apple.ApplePS2Controller (error 0xdc008016).

 

I'll check this again, which version of Lion you are using? Does any of my kexts worked before?

Link to comment
Share on other sites

Hi,

 

Yes, an old one is loading. Don't know which one, it was a v3. I'm using lion 10.7.5. I've read that this is a problem introduced by Xcode 4.5 when compiling software for lion from a mountain lion machine.

 

:-)

Thanks

Link to comment
Share on other sites

Hi,

 

Yes, an old one is loading. Don't know which one, it was a v3. I'm using lion 10.7.5. I've read that this is a problem introduced by Xcode 4.5 when compiling software for lion from a mountain lion machine.

 

:-)

Thanks

 

Test this please and I think this might solve the issue. If it works then let me know your notebook model.

Lion_Test.zip

Link to comment
Share on other sites

Ok now it's loading, but the Touchpad doesn't work. It actually is being recognized. I only have your ApplePS2Controller and ApplePS2ElanTouchpad loaded. This is an Asus N56VZ.

Here is the log:

 

 

ElanTech Touchpad driver v2.1.3 Final by EMlyDinEsHMG(OSXLatitude) © 2012-2013
Elan: Detecting the touchpad
mbinit: done [128 MB total pool size, (85/42) split]
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
Elan: FirmWare Version 3546883
Elan: Touchpad found, Assuming hardware version 4 (with firmware version 0x361f03)
No interval found for . Using 8000000
Elan: Placing the Touchpad into Absolute mode
Elan: Successfully placed touchpad into Absolute mode
Elan: Setting touchpad Range
Elan: Touchpad Pad CentreX 1710, CentreY 1026
Elan: Touchpad range X_min 0 Y_min 0 X_max 3420 Y_max 2052
Elan: MouseInformation { 0x20, 0x03, 0x64 }
Elan: Mouse Resolution 1400
Elan: Enabling the touchpad
 
Whether I connect an USB mouse or not, that doesn't work anyway. No VoodooPS2Etc is being loaded.
How to proceed?
Thanks
!!
 
Link to comment
Share on other sites

Ok now it's loading, but the Touchpad doesn't work. It actually is being recognized. I only have your ApplePS2Controller and ApplePS2ElanTouchpad loaded. This is an Asus N56VZ.

Here is the log:

 

 

ElanTech Touchpad driver v2.1.3 Final by EMlyDinEsHMG(OSXLatitude) © 2012-2013
Elan: Detecting the touchpad
mbinit: done [128 MB total pool size, (85/42) split]
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
Elan: FirmWare Version 3546883
Elan: Touchpad found, Assuming hardware version 4 (with firmware version 0x361f03)
No interval found for . Using 8000000
Elan: Placing the Touchpad into Absolute mode
Elan: Successfully placed touchpad into Absolute mode
Elan: Setting touchpad Range
Elan: Touchpad Pad CentreX 1710, CentreY 1026
Elan: Touchpad range X_min 0 Y_min 0 X_max 3420 Y_max 2052
Elan: MouseInformation { 0x20, 0x03, 0x64 }
Elan: Mouse Resolution 1400
Elan: Enabling the touchpad
 
Whether I connect an USB mouse or not, that doesn't work anyway. No VoodooPS2Etc is being loaded.
How to proceed?
Thanks
!!
 

 

Seems like Xcode bugs so I need to build it with a Lion SDK. I'll try to compile and let you know.

Link to comment
Share on other sites

Hi,
I've got a laptop almost identical to yours, X53E, and I've often having hangs, It seems that setting the boot response to 1500, it doesn't hang after sleep but I've no idea what to do to sort the hangs issue out.
I'd really appreciate your advise.
Thanks a lot.

Link to comment
Share on other sites

Hi,

I've got a laptop almost identical to yours, X53E, and I've often having hangs, It seems that setting the boot response to 1500, it doesn't hang after sleep but I've no idea what to do to sort the hangs issue out.

I'd really appreciate your advise.

Thanks a lot.

 

What kind of hangs you have?

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...