Asus K55VM Help topic

[dionzarek]

Just asking, I've update my hackintosh to 10.10.1 but after restart, I can't login to iMessage and Face Time, but Appstore and iCloud runs perfect? Does anybody have this problem after updating to 10.10.1? 

 

Thanks

[sinsinsin]

if anyone has problem by temperature up cpu , here upload the file .to down temperature

AppleIntelCPUPowerManagement.zip

[ABRFilho]

Hi, could someone please provide an original K55VM DSDT?

[Everton Alves]

hey

where i put this:

<key>device-properties</key>   <string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000005006201140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string>

in side of confi.plist

i try put it but i dont know where
husahuashuasuh

Thanks
PS:  I AM USING CLOVER EFI

[sinsinsin]

i updated in post  #411 : Extra folder and i delete nullcpupowermanagement.kext ,DisableTurboBoostBattery.kext

[Fry]

K55VM i5 3210m successful legacy update from Mavericks 10.9.5 to Yosemite 10.10.1

 

1. Update Clover (2953+) & Reboot

2. Copy 10.10 kext folder (EFI)

3. Download 10.10(.1) from Mac App Store

4. Reboot & Check the intelcpupowermanagement patch & set version to 10.10.1 if needed in clover

5. Launch "Installer OS X Yosemite.app "

[Tebogo]

AsusK55Yosemite.png

This is a guide to install Mac OSX on a Asus K55VM

 

Specifications:

Processor               : Intel® Coreâ„¢ i7-3610QM Processor (6M Cache, 2.30 GHz)
Graphics Processor(GPU) : Intel® HD 4000 and NVIDIA® Optimus™ GeForce® GT 630M
Chipset                 : Intel® HM76 Express Chipset
Hard disk               : Hitachi 500GB 5400rpm HDD 
RAM                     : 8GB DDR3 1600 MHz SDRAM
Wifi                    : Atheros AR9485 Wireless Network Adapter
LAN                     : Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter
Audio                   : Realtek® High Definition Audio ALC270
USB 3.0                 : Intel Panther Point PCH - USB 3.0 xHCI Controller 
Touchpad                : Elantech Touchpad v4 Hardware
Webcam                  : USB2.0 UVC HD WebCam
Card reader             : Realtek RTS5289 PCI-E Card Reader
Monitor                 : AU Optronics B156XW02 V6 WXGA 15.6 16:9 HD 1366x768
Optical Drive           : HL-DT-ST DVDRAM GT51N SCSI CdRom
Battery                 : 6Cells 4700 mAh 50 Whrs
Interface :
1 x Microphone-in jack
1 x Headphone-out jack 
1 x VGA port/Mini D-sub 15-pin for external monitor
2 x USB 3.0 port(s) 
1 x USB 2.0 port(s)
1 x RJ45 LAN Jack for LAN insert 
1 x HDMI

 

Working:

Graphics with QE/CI on Intel HD4000 GPU

Audio with AppleHDA

LAN

USB2.0 and USB3.0

Webcam

Optical Drive

HDMI

Battery

Elantech Touchpad 

Sleep, Processor P&C-States with Native power management

Fn Hotkeys

 

Not working:

Atheros AR9485 Wireless Network Adapter (need to replace with supported card)

NVIDIA® Optimus™ GeForce® GT 630M

Realtek RTS5289 PCI-E Card Reader

 

Unknown:

None

  

Issues:

VGA work but not good

 

For Installation: (Standard)

Follow the Steps in the link below, starting with Pre installation, Installation and Post Installation: 

http://www.osxlatitude.com/edp/documentation/

 

Changes:

Wifi : Original Ralink RT5390 not work (Replaced by: Atheros Ar5bhb92-h))

Optical Drive : Not Present (Replaced by SSD Crucial 128GB)

 

 

Custom Guide: 

What do you need:

- A USB with 8gb

- OS X Yosemite 10.10 bootable USB for Intel PCs (copy-paste in google)

- Files attached on this post

 

How to prepare usb install:

1- Download this OS X Yosemite 10.10 bootable USB for Intel PCs

2- Install RAW image on your usb (Mac OSX)

Open the terminal:

Find your USB stick

- diskutil list 

Unmount USB

- diskutil unmountDisk /dev/disk2

Copy RAW Image

- sudo dd if= [drag and drop the raw file in terminal] of=/dev/rdisk2 bs=1m

 

Wait to finish and now you have a usb install ready to copy kext and clover

 

3- Download Clover EFI,  extract and open the Clover Configurator.app

4- Mount your EFI USB partition without format and then copy EFI folder of Clover EFI into

5- Copy Apps folder into your usb install

 

So now you have a full USB Install for this Asus

 

How to install Mac OSX in your notebook:

1- Boot installation from USB

2- Format HDD on GPT

3- Select Partition to install and finish installation

4- Now we must format EFS partition to FAT32, then mount this partition and copy Clover files

(to format EFS we can do from terminal or with EFI Tools Clover EN.app (F option))

5- To install kexts use EDP system “Install_EDP.app†attached or http://argo.osxlatitude.com/edp/download/

 

Or use "Kext Utility.app" if not work EDP, open, drop files of kexts folder and put your password wait until finish Add and close. Now you can restart system

(If you don't have DSDT patched use No-DSDT-Kexts so if you have use DSDT-Kexts)

 

If you don't use patched DSDT i think that you put this string on config.plist to enable HD4000

 

<key>device-properties</key>   <string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000005006201140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string>

 

6- Then go into BIOS, in Boot menu select "Add New Boot Option" and complete:

Add boot option: (put a name) for example: Clover boot

Select Filesystem: (Select HDD that have Mac OSX Installed)

Path for boot option: \EFI\CLOVER\CLOVERX64.efi

 

Select Create and put the new boot option first.

 

Check too the VRAM of HD4000 is 64MB because probably if it's changed not work 

 

Save changes and reboot

 

7- So, now when system boot show Clover bootloader and just select the Mac OSX partition and press enter

 

If you did it all Mac boot you did well 

Now put use Kext Utility.app to install RealtekRTL8111.kext, AppleHDA.kext, AppleIntelFramebufferCapri.kext and others kexts if don't work any injected (EFI/CLOVER/KEXTS/10.10) and HWMonitor.app into Applications folder if you want see temperatures and frequency and enjoy your Hackintosh!!!

 

If you have other problems ask me

 

 

Updates:

Clover 16.11.14.zip

 

Older files:

Clover 11.11.14.zipClover 6.10.14.zipClover EFI 22.10.14.zip

 

Hello Sergeant!

 

I have a slightly different laptop (Asus R510CA-XX187H (X550CA) than yours, but a lot of hardware is the same.

Can you tell me how you got the ALC270 with The AppleHDA working and the battery.

I tried your DSDT, but that won't work because I have not the same laptop

 

I also tried the config.plist or parts of that and the different *.kext files but know result.

 

So I think it will be a combination, so can you point me in the right direction?

 

Same for the:

 

USB3.0

HDMI

Battery

Elantech Touchpad 

Sleep, Processor P&C-States with Native power management

Fn Hotkeys

 

Rest is working fine

 

Thanks in advance!

 

Tebogo

[sinsinsin]

Hello Sergeant!

 

I have a slightly different laptop (Asus R510CA-XX187H (X550CA) than yours, but a lot of hardware is the same.

Can you tell me how you got the ALC270 with The AppleHDA working and the battery.

I tried your DSDT, but that won't work because I have not the same laptop

 

I also tried the config.plist or parts of that and the different *.kext files but know result.

 

So I think it will be a combination, so can you point me in the right direction?

 

Same for the:

 

USB3.0

HDMI

Battery

Elantech Touchpad 

Sleep, Processor P&C-States with Native power management

Fn Hotkeys

 

Rest is working fine

 

Thanks in advance!

 

Tebogo

in  post  https://osxlatitude.com/index.php?/topic/2184-asus-k55vm-yosemite-1010-update-161114/page-42&do=findComment&comment=45492

 

have drives for audio AppleHDA.kext, HDAEnabler3.kext do yo need remplaze on /s/l/e finality use kext utility reboot 

[r0ni3]

hello , this is the first time I use clover , I always used chamaleon , I installed Yosemite ( okay ! ) the only problem is I can not boot with clover windows8 .
I have a blinking cursor , if you use chamaleon start regularly ( but not start osx ) .

who can help me ?

thank you all! ; )

[Bronxteck]

you have to install windows using uefi boot. it will not boot a legacy installed windows. you probably need to do something like this http://social.technet.microsoft.com/wiki/contents/articles/14286.converting-windows-bios-installation-to-uefi.aspx then reinstall clover. or just install a fresh windows using uefi boot.