Jump to content

Bluetooth Firmware Uploader


EMlyDinEsH

Recommended Posts

  • Administrators

Haha, hello Arthur. You might have guessed, we don't make a living out of this!  8-)  Unlike some... Hey, we're not as reactive as on IM, but we're only a small (but nice?) outfit!  :mrgreen:

 

Which version of OS X are you trying to load this BT kext on? Could it be that the kext has a minimum OS X version specified in its Info.plist and that does not match your installation?

Link to comment
Share on other sites

ASUS BT-400, VID: 0b05  PID: 17cb, Maverics 1.9.3, using BTFirmwareUploader v2.4, does´t work, gives these errors:


2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found
2014-06-11 13:47:42 -0500 kernel[0]: Bluetooth Firmware Uploader v2.4 Copyright (c) 2012-2014 EMlyDinEsH (OSXLatitude).
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5575, 70105 bytes)......
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Successfully patched the firmware
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Failed to reset the device, error (-536870187)
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Unable to get device status
Link to comment
Share on other sites

hello

 

several days to know a answer

 

u live from this ?

 

if so u live bad...

 

what + info  u want ?

 

good hack

 

 

is me.. hacking mac os x

 

Sorry for the delay but i was busy. What is your OSX version? Like herve said it could be OSX version issue. Can you send me an ioreg file and System log?

Link to comment
Share on other sites

 

Broadcom BCM94352HMB / AzureWave AW-CE123H 10.9.3

 

Sleep Before and after

 

v14 c5270

http://cfile30.uf.tistory.com/image/271CF73953973111088CCE

v14 c4096

http://cfile10.uf.tistory.com/image/2545CB395397311102BB69

 

Bug fixed?

 

Sorry I do not know English. 
 
Google translate

 

 

What are your Broadcom ids? Can you send me an ioreg file(use IORegistrExplorer v2.1 or lower) and your system log before and after sleep with my kext?

 

EDIT: Did you use my kext? which version of my kext installed? Send me your systems logs and ioreg i've asked before with my kext.

Link to comment
Share on other sites

 

ASUS BT-400, VID: 0b05  PID: 17cb, Maverics 1.9.3, using BTFirmwareUploader v2.4, does´t work, gives these errors:


2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found
2014-06-11 13:47:42 -0500 kernel[0]: Bluetooth Firmware Uploader v2.4 Copyright (c) 2012-2014 EMlyDinEsH (OSXLatitude).
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5575, 70105 bytes)......
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Successfully patched the firmware
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Failed to reset the device, error (-536870187)
2014-06-11 13:47:42 -0500 kernel[0]: BTFirmwareUploader :: Unable to get device status

 

Seems like it failed at the end which happens sometime randomly.What is your boot loader? Does this happens always in every boot? Can you send me your ioreg and System log file so i can look for additional details?

 

EDIT: what about older version v2.3 or lower? PM me so i can help you with the files and details i asked.

Link to comment
Share on other sites

No luck ((

VID: 0x13d3  PID: 0x3295, Mavericks 10.9.4, using BTFirmwareUploader v2.4

 

Did you add your id's to my kext plist? Can you send me your ioreg and System log files?

 

 

EDIT: I've searched about your device id and found that it doesn't require any firmware update, so you don't need to use my kext. It should work with standard Apple Bluetooth drivers (or) Broadcom driver if its broadcom branded card by adding device id to the kext plist.

  • Like 1
Link to comment
Share on other sites

Did you add your id's to my kext plist? Can you send me your ioreg and System log files?

 

 

EDIT: I've searched about your device id and found that it doesn't require any firmware update, so you don't need to use my kext. It should work with standard Apple Bluetooth drivers (or) Broadcom driver if its broadcom branded card by adding device id to the kext plist.

yes, i'm use your kext, add my id's in kext. You mean my card work absolute native only with FakeID for wifi?

 

p.s. sorry for my english

 

http://cl.ly/3K2V2I1h133l - IOReg

 

%D0%A1%D0%BD%D0%B8%D0%BC%D0%BE%D0%BA%20%

 

upd.

 

have mistake  this vid & pid (VID: 0x13d3  PID: 0x3295) from over module (bcm 943225hmb), vid & pid from bcm 94352hmb i can't find.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...