Administrators Bronxteck Posted November 28, 2011 Administrators Share Posted November 28, 2011 i dont know i never used that image... but im sure it still needs chameleon Link to comment Share on other sites More sharing options...
vorob Posted November 28, 2011 Author Share Posted November 28, 2011 There are no guide how to install this pkg file under windows into image Link to comment Share on other sites More sharing options...
Administrators Leon Posted November 28, 2011 Administrators Share Posted November 28, 2011 take a good guess Link to comment Share on other sites More sharing options...
LiquidMercury Posted December 7, 2011 Share Posted December 7, 2011 For starters great community going on here, however I am having some issues at the moment I am currently running 10.6.8 on a d620 with 14E4:4311 Broadcom BCM 4311 802.11b/g WLAN adapter and for the life of me I cannot get it to function, If memory serves it was working prior to the EDP update of 18 Nov. Should I be running the more current 2.x edp to remedy this issue, or am I possibly missing a step here, any help would be appriecated and if more information is needed I will try and provide it as best I can. Thanks. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 8, 2011 Administrators Share Posted December 8, 2011 did you remove your networking devices in prefpane then save changes and add them back with a new location and make sure the enable wifi option is checked plus checked the bios option for wifi enabled and the switch on the side on? Link to comment Share on other sites More sharing options...
LiquidMercury Posted December 8, 2011 Share Posted December 8, 2011 I have removed all connections shows airport card not configured, hit the add interface selection button, default interface is airport, default name is airport, clicked on create applied settings, under enter the name of network I added my network name, and security type and entered PW, still wont turn on, got a feeling that I am missing a step. Thanks for the help all. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 8, 2011 Administrators Share Posted December 8, 2011 check with chameleon wizard, your org.chame plist if ethernet en1 is selected or not Link to comment Share on other sites More sharing options...
LiquidMercury Posted December 8, 2011 Share Posted December 8, 2011 Just full of questions today guys, I got 10.6.0 back up and running, I was using leppy700m's boot disk and now have wifi. Do I need to skip the post install stuff on his disk and just go with the 1.9.2 EDP after I upgrade to 10.6.8? Also another question, what are the odds of getting lion running on the d620 I know its 32bit and Lion is x64, just wanted to know what the odds were. Thanks again all. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted December 8, 2011 Administrators Share Posted December 8, 2011 no odds on d620 it runs lion i have 2 of the intel graphics versions the one with the t7200 core2duo runs better than the t5500 one i have... t7200 runs way cooler temp wise. use edp 2.2 for lion Link to comment Share on other sites More sharing options...
LiquidMercury Posted December 9, 2011 Share Posted December 9, 2011 sorry if I keep asking the same question a million times, but just what do I need to do to get SL 10.6.8 to recognize my wifi card, I feel like I am banging my head against a brick wall here. Thanks for all your help. Link to comment Share on other sites More sharing options...
Recommended Posts