Floris Posted June 26, 2012 Share Posted June 26, 2012 Right, the strange thing is the VoodooHDA was working before. Sometimes with boot errors, but always working once I got into OSX! Found one of my problems: when I installed Myhack, the extension myhack.kext was created in the /S/L/E folder which contains all the kextfiles from the /Extra/Extensions folder. Then I installed EDP3, which creates 0EDP.kext also containing the /Extra/Extensions kexts. I removed the myhack.kext and it boots again -and it boots even better without VoodooHDA-. Now I need to get audio working somehow... Any suggestions? Link to comment Share on other sites More sharing options...
Administrators Leon Posted June 26, 2012 Author Administrators Share Posted June 26, 2012 Hi, Yes, EDP3 does not use 0edp.kext.. that is version 2.x that uses that - version 3.x uses myhack.kext .. so make sure that you are using the right one. Link to comment Share on other sites More sharing options...
Floris Posted June 27, 2012 Share Posted June 27, 2012 Hi, Yes, EDP3 does not use 0edp.kext.. that is version 2.x that uses that - version 3.x uses myhack.kext .. so make sure that you are using the right one. Hi Leon, You know I'll never doubt anything you say but when I looked at the myhack.kext, the change date was of the day I installed myhack. After I created a new EDP, the change date of 0edp.kext had changed. Can you please tell me how to deal with myhack and the EDP3 tool? Thanks again! Link to comment Share on other sites More sharing options...
Administrators Leon Posted June 27, 2012 Author Administrators Share Posted June 27, 2012 open console and type: sudo su rm -Rf /System/Library/Extensions/0EDP.kext my -q -t / .. and reboot Link to comment Share on other sites More sharing options...
johe Posted July 16, 2012 Share Posted July 16, 2012 Is the sound kext fix for lion? //Johan Hellström Link to comment Share on other sites More sharing options...
Administrators Syonagar Posted July 22, 2012 Administrators Share Posted July 22, 2012 Dear johe, What is your system specifications? Cheers! Link to comment Share on other sites More sharing options...
ckleea Posted July 30, 2012 Share Posted July 30, 2012 Do you get shutdown working properly? I found sleep is working fine. Most works very well but not shutdown. I install the latest EDP package and use the Mountain Lion Link to comment Share on other sites More sharing options...
ckleea Posted July 31, 2012 Share Posted July 31, 2012 I install via myHack and bootpack on a Mountain Lion release version. Installation is ok but kernel panic on first run of EDP package. It occurs in dealing with the permission repair etc. Upon reboot with -v -f, it boots and almost everything works. Only problem is 1. reboot - not properly reboot and hang 2. shutdown - white screen with cursor. When shutdown button is pressed, it will show up CPU halted but restart shows an error message of failed shutdown. Any suggestion?? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 31, 2012 Administrators Share Posted July 31, 2012 at the chameleon prompt boot with darkewake=0 and once booted see if it shut's down properly. if it does then add it to the Boot.plist. Link to comment Share on other sites More sharing options...
ckleea Posted August 1, 2012 Share Posted August 1, 2012 Dakewake = 0 does not work Link to comment Share on other sites More sharing options...
Recommended Posts